Reasons for using KNF vacuum pumps in wound care with NPWT technology.

Demonstrates performance relative to size and weight ratio.

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Well-balanced pressure reduction and pressurization characteristics - Variable flow rate (brushless motor) *Optional Brush DC motor specification KPDC Basic flow rate: 1.7 l/min Achievable vacuum level: 370 mbar abs Maximum allowable discharge pressure: 1.0 bar (0.1 MPa) Brushless DC motor specification KPDC-B or KPDC-B4 Basic flow rate: 2.1 l/min Achievable vacuum level: 330 mbar abs Maximum allowable discharge pressure: 1.2 bar (0.12 MPa) Please check the data sheet for details.

• Other pumps

Integrated pump and motor, downsized compared to conventional products, with improved durability. Evolution model of the NMP850 HP series.

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Well-balanced pressure reduction and pressurization characteristics - Variable flow rate (brushless motor) *Optional Basic flow rate: 7 l/min Achievable vacuum level: 220 mbar abs Maximum allowable discharge pressure: 2.2 bar

• Other pumps

Exhibits performance relative to size and weight. '.1.2' = Increased flow rate with parallel connection. '.3' = Increased vacuum level with series connection.

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Well-balanced pressure reduction and pressurization characteristics - Variable flow rate (brushless motor) *optional NMP820.1.2 KPDC-B or NMP820.1.2KPDC-B4 Basic flow rate: 3.5 l/min Achievable vacuum level: 330 mbar abs Maximum allowable discharge pressure: 1.2 bar (0.12 MPa) NMP830.3KPDC-B or NMP820.3KPDC-B4 Basic flow rate: 1.7 l/min Achievable vacuum level: 100 mbar abs Maximum allowable discharge pressure: None specified (do not use for pressurization) Please refer to the data sheet for details.

• Other pumps

Integrated pump and motor, downsized compared to conventional products, with improved durability. An evolved model of the long-selling NMP830 series.

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Well-balanced pressure reduction and pressurization characteristics - Variable flow rate (brushless motor) *Optional Basic flow rate: 5 l/min~ Achievable vacuum level: 230 mbar abs Maximum allowable discharge pressure: 3 bar (0.3 MPa)

• Other pumps

Integrated pump and motor, downsized compared to conventional products, with improved durability. Long-selling micro pump NMP830 series.

- Customization is possible according to technical challenges. - Maintenance-free, contamination-free - High pump performance despite compact design - Long lifespan design, high durability - Variable flow rate (brushless motor) *Optional - No restrictions on installation direction Basic flow rate: 2.5 l/min Achievable vacuum level: 250 mbar abs Maximum allowable discharge pressure: 1.4 bar

• Other pumps

Integration of pump and motor, downsizing compared to conventional products, and improved durability. The long-selling micro gas pump NMP850 series.

- Customization is possible according to technical challenges. - Maintenance-free, contamination-free - High pump performance with a compact design - Long lifespan design, high durability - Variable flow rate (brushless motor) *Optional - No restrictions on installation direction Basic flow rate: 4.2 l/min Achievable vacuum level: 230 mbar abs Maximum allowable discharge pressure: 2.5 bar

• Other pumps

Evolution model of the long-selling product NMP830 series.

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Change to FDA-certified materials (optional) - Well-balanced pressure reduction and pressurization characteristics - Serial connection double head <50 mbar abs (optional) - Increased flow rate with double head type - Increased vacuum level with double head type (optional) Basic flow rate: 5 l/min~ Achievable vacuum level: 230 mbar abs Maximum allowable discharge pressure: 3 bar (0.3 MPa)

• Other pumps

Long-selling NMP850 series micro diaphragm gas pump

- Customization according to technical challenges is possible. - Maintenance-free, contamination-free. - High corrosion resistance due to a wide variety of gas contact materials. - High pump performance despite a compact design. - Long lifespan design, high durability. - Variable flow rate (brushless motor). - No restrictions on installation direction. Basic flow rate: Single head 3.5 - 4.5 l/min (varies by material and motor) Double head 6.0 - 8.0 l/min (varies by material and motor) Achievable vacuum level: 230 - 300 mbar abs (varies by material and motor) Maximum allowable discharge pressure: 2.1 - 2.5 bar (varies by material and motor)

• Other pumps

This is the replacement procedure for the consumable parts diaphragm and valve. It can also serve as a reference for the maintenance procedures of other micropumps.

The maintenance procedures for the other gas pumps are generally similar, so please refer to them.

• Other pumps

Long-selling NMP830 series micro diaphragm gas pump

- Customization according to technical challenges is possible. - Maintenance-free, contamination-free - High corrosion resistance due to a wide variety of gas contact materials - High pump performance despite compact design - Long lifespan design, high durability - Variable flow rate (brushless motor) - No restrictions on installation direction Basic flow rate: Single head 2.1 - 3.1 l/min (varies by material and motor) Achievable vacuum level: 250 - 350 mbar abs (varies by material and motor) Maximum allowable discharge pressure: 1.0 - 1.4 bar (varies by material and motor)

• Other pumps

Evolution model of the long-selling product NMP850 series.

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Change to FDA-certified materials (optional) - Well-balanced pressure reduction and pressurization characteristics - Serial connection double head <50 mbar abs (optional) - Increased flow rate with double head type - Improved vacuum level with double head type (optional) Basic flow rate: 3.9 - 4.5 l/min (varies by material and motor) Achievable vacuum level: 230 - 300 mbar abs (varies by material and motor) Maximum allowable discharge pressure: 2.1 - 2.5 bar (varies by material and motor)

• Other pumps

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

We will be exhibiting jointly with Ando Corporation at the "22nd Pipe and Equipment Comprehensive Exhibition 2025 OSAKA," which will be held for three days from September 11 (Thursday) to September 13 (Saturday), 2025, at Intex Osaka, Hall 6A. Please be sure to stop by when you visit. 【Exhibition Schedule】 ● Environmentally friendly heat exchanger "Heat Recovery Heat Exchanger" ● Cut model of "Stainless Steel High Efficiency Heat Exchanger" ● Skeleton model of heating and cooling heat exchanger "SK Water Coil" ● Cooling heat exchanger "SK Water Coil Cartridge Type" ● Radiant heating pipe for space heating "SK Aerofin Tube" ◆ Event Dates: September 11 (Thursday) to September 13 (Saturday), 2025 10:00 AM to 5:00 PM (until 3:00 PM on the last day) ◆ Venue: Intex Osaka, Hall 6A Address: 1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture, 559-0034 Access: https://www.intex-osaka.com/jp/access/ ◆ Booth Number: 112 ◆ Admission Method: Pre-registration required (free) *Please check the official website for details.