(Surface Grinding) Sludge Recovery Success Case 1 (Achieved High Sludge Recovery Capability and Reduced Maintenance Costs!)

Powerfully collect "sludge" in coolant liquid using a magnetic method!

(Main Features) 1. High sludge recovery capability and dewatering performance 2. Long-term maintenance of coolant processing liquid 3. Low frequency of failures (long-term stability) (What's Different!) 1. Improved durability of the drive system - Prevents sludge/grit contamination in the drive system (maintains initial performance for a long time) 2. Special hardening treatment on the surface of the magnetic drum - The magnetic drum and dewatering roller are resistant to scratches 3. Adoption of a forced drive system for the dewatering roller 4. Unique magnetic arrangement based on magnetic field analysis technology

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

The strongest magnetic drum in history / Surface magnetic force of 9000 gauss! The "UK" has been newly added to the Fine Mag series, which has the highest customer rating No. 1.

● Magnetic force of 9000 Gauss (drum surface) ● Recovery capacity is an impressive 1.7 times that of the K-type (our standard model)! (Grinding sludge 5-15um) ● Demonstrates powerful recovery for hard-to-magnetize sludge (e.g., from carbide tool grinding)! (Here’s what’s different!) 1. High effectiveness in recovering hard-to-magnetize sludge generated in "carbide tool processing," which has been difficult to recover with conventional methods, as well as "ultra-fine sludge" from honing, lapping, super finishing, and electrical discharge machining. 2. Contributes to resource recycling by recovering "rare metals" (such as tungsten) contained in carbide sludge. 3. No parts that require regular replacement, such as "secondary filtration devices" (paper, diatomaceous earth, line filters), significantly reducing running costs and replacement labor.

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

Collect non-magnetic sludge with a filter! ❶ Filter sludge from 10 to 95μ ❷ Available with magnet + paper filter model ❸ Available with high flow processing model

(Main Features) ◎ Filters sludge in coolant liquid using a paper filter ◎ Capable of filtering from 10 to 95μ by selecting the appropriate filter paper ◎ A dual set model with both "magnet type" and "paper filter type" is also available! ◎ Significantly reduces the consumption of filter paper, lowering running costs (What's Different!) ★ Significantly reduces unnecessary consumption of filter paper with a "float switch"!

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

We will introduce coolant devices such as "magnet separators," "cyclone separators," "paper filters," and "filter conveyors."

1. "Magnet Separator" ◎ Achieves "high filtration performance" and "high wear resistance" ◎ A rich lineup optimal for usage conditions including "grinding processing / cutting processing / shaving processing" 2. "Cyclone Separator" ◎ High-performance, energy-saving "Cyclone Separator" ◎ Added foam prevention function 3. "Paper Filter" ◎ Removes impurities such as grinding sludge and abrasives with the "Paper Filter" ◎ Usable regardless of "magnetic / non-magnetic" 4. "Filtration Conveyor" ◎ A conveyor equipped with the function to "remove / filter" sludge and chips from the processing fluid 5. "Level Gauge" (Liquid Level Meter) ◎ Selectable according to the machine used, including stroke range, detection method, and detection position 6. "Oil-Water Separator" (Disk Skimmer) ◎ Recovers oil floating on the coolant tank liquid level 7. "Chip Processing Related Equipment" ◎ Supports factory environment improvement, reduction of industrial waste, and recycling

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Equipped with Jetson AGX Orin 32GB/64GB ● Gigabit LAN ×1, 10Gigabit LAN ×1 ● USB 3.2 Gen 2 (Type-A) ×4 ● DB-9 connector ×1 (for DIO 8 channels) ● DB-9 connector ×2 (supports RS-232/422/485: Rx/Tx/RTS/CTS) ● Jetpack 6.0.0 pre-installed

Features: ● Equipped with Intel Atom x7835RE/x7433RE ● LPDDR5x 8GB/16GB onboard ● eMMC 32GB/64GB onboard ● LVDS x 1, DDI x 1 ● USB 2.0 x 8, USB 3.2 Gen 2 x 2 ● PCIe x1 x 4 ● COMe Type 10 standard, 84mm x 55mm size ● Operating temperature -40 to 85℃ ● Optional items ECB-920A-0001: Development carrier board NANOCOM-ADN-FAN01: CPU fan NANOCOM-ADN-HSP01: Heat spreader (※ Heat dissipation is required in the enclosure)

■ FaceMe Security "Visitor Access Management" Main Features and Characteristics < Set Access Period for Each Visitor > - Individual settings for the dates and times visitors can enter - Access periods can be optimized according to the visitor's situation, whether for short visits or long stays. < Two Types of Authentication Methods to Accommodate Various Scenarios > ▶ Authentication via IP Camera - Enables authentication from a distance, achieving facial recognition without the need to disembark. ▶ Authentication via Facial Recognition Device (tablets, etc.) - Ideal for entry scenes such as reception or security posts. Can be flexibly utilized depending on the installation location and operation. - Allows for on-the-spot registration of facial information using the device, enabling smooth responses to sudden visits or unexpected guests. < Real-Time Notifications Supporting Security and Reception Operations > - Real-time notifications of visitor and employee classifications, authorization expiration, and authentication status. - Prevents delays and oversights in verification, balancing the reduction of security staff workload with enhanced security. These features resolve issues arising from visual checks, logbooks, and IC card operations, simultaneously achieving enhanced security and improved efficiency in reception and security operations.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.