We have newly added the product page for 【Suntool】 and the case study on "Hot melt bonding of paper to display panels"!

It enables uniform application without seams or unevenness on wide materials that are difficult to spray coat using conventional methods, and it also allows for thin coatings!

The "Curtain Spray Coating System" is a product that can uniformly apply hot melt in a fibrous form without contact. It enables seamless and even application on wide materials, which is difficult with conventional spray coating, and allows for thin application as well. It minimizes the consumption of hot melt adhesives and is adopted in a wide range of industries, including the filter and building materials sectors. *Uniform micro-particle coating is also possible with liquids other than hot melt (such as chemicals, fragrances, oils, etc.). 【Features】 ■ Allows for uniform application of small amounts of hot melt ■ Capable of applying a soft texture ■ Sharp edges at both ends of the application width ■ Minimal scattering due to application ■ Hot melt can be applied in a fibrous form *For more details, please refer to the PDF document or feel free to contact us. 【Adoption Results】 ■ Numerous major manufacturers ■ Building materials and spray laminate industries ■ Filter industry ■ Sites where the cost of hot melt is high

• Other mounting machines
• Painting Machine
• spray

This document presents case studies of solutions to challenges related to the "Curtain Spray Coating Device" manufactured and sold by our company.

Utilizing the cohesive force (viscosity) of hot melt to extrude fine fibers and uniformly apply them in a non-woven fabric style! It is possible to spray apply as a single unit even over a wide area! 【Features】 ■ Soft finish ■ Cost benefits *Reduction in the amount of hot melt (adhesive) used ■ Compatible with adhesives from high viscosity to low viscosity ■ Breathable ■ Even application weight ■ Environmentally friendly / Recycling measures ■ Uniformly and beautifully coated We would like to introduce one example of how various companies have adopted these features.

• Other mounting machines
• Painting Machine
• Other painting machines

Utilizing the adhesive force (viscosity) of hot melt to extrude fine fibers and uniformly apply them in a non-woven fabric form! It is also possible to spray apply it as a single unit over a wide area!

The "Curtain Spray" is a device that utilizes the cohesion and viscosity of hot melt adhesive to extrude fine fibers and uniformly apply a thin film in a non-woven fabric manner. It can spray coat in a single unit even for wide widths. Additionally, in the case of liquids (chemicals, fragrances, oils), it can atomize them into fine particles. 【Features】 ■ Soft finish with breathability, uniform coating weight, and beautifully even coating ■ Reduction in the amount of hot melt adhesive used, resulting in cost benefits ■ Compatible with adhesives ranging from high viscosity to low viscosity ■ Environmentally friendly / recycling measures * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Building materials, seals ■ Films, spray lamination ■ Non-woven fabrics, filters

• Other mounting machines

Utilizing the adhesive power (viscosity) of hot melt to extrude fine fibers and uniformly apply them in a non-woven fabric form! It is also possible to spray coat in a single application over a wide area!

The "Curtain Spray" is a device that utilizes the cohesive force and viscosity of hot melt (adhesive) to extrude fine fibers and uniformly apply a thin film in a non-woven fabric manner. It can also spray apply in one piece over a wide width. Additionally, in the case of liquids (chemicals, fragrances, oils), it can atomize them into fine particles. 【Features】 ■ Soft finish with breathability ■ Cost benefits through reduced usage of hot melt (adhesive) ■ Compatible with adhesives from high viscosity to low viscosity ■ Even application weight, beautifully coated uniformly ■ Environmentally friendly / recycling measures * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Achievements】 ■ Building materials ■ Seals ■ Filters ■ Films ■ Spray lamination ■ Non-woven fabrics

• Other mounting machines
• Painting Machine
• spray

It enables uniform application without seams or unevenness on wide materials that are difficult to spray coat using conventional methods, and allows for thin application as well!

【Sample Distribution】We are currently distributing coating samples. Please check the end of the article for details. The "Curtain Spray Coating System" is a product that can uniformly apply hot melt in a fibrous form without contact. It allows for seamless and even application on wide materials, which is difficult with conventional spray coating, and also enables thin application. It minimizes the consumption of hot melt adhesives and is adopted in a wide range of industries, including the filter and building materials industries. *Uniform microparticle coating is also possible with liquids other than hot melt (such as chemicals, fragrances, oils, etc.). 【Features】 ■ Capable of uniform application of a small amount of hot melt ■ Excellent coating with a soft texture ■ Sharp edges at both ends of the application width ■ Minimal scattering due to coating ■ Hot melt can be applied in a fibrous form *For more details, please refer to the PDF document or feel free to contact us. For a limited time, we will send coating samples only to companies that inquire! Please feel free to contact us!

• Painting Machine

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.

In battery manufacturing lines, if components containing copper are used, there is a possibility that metal powder may mix in, dissolve, ionize, and pass through the separator, causing a malfunction that connects the positive and negative electrodes. Such minute metal powders may not be detected during pre-shipment inspections, and even if they are found, they can lead to various issues, such as the need to increase inspection processes to detect them. Therefore, Fukuda has developed a copper-free (all stainless steel) air leak tester that can be safely used in the production lines of battery manufacturers and secondary battery manufacturing equipment manufacturers. For product specifications and details, please refer to the "Related Product Information" and "Related Catalogs" below.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!