Would you like to create environmentally friendly plastics with Plasteco's "supercritical inert gas foaming molding system"? We offer total support from raw materials to molding equipment and the development of the molding process.

Renewed with a new model! This is a gas supply device capable of precisely and stably supplying inert gases necessary for foam molding, such as carbon dioxide (CO2) and nitrogen (N2).

【Renewal & New Model Launch!】 - Smaller and lighter than the previous model - Equipped with a 12-inch large screen touch panel - Precise control of gas supply volume is possible through data linkage with various molding machines Foaming with CO₂ or N₂ experiences significant changes in bubble diameter and foaming conditions due to minor fluctuations in supply volume. Additionally, traditional pump methods using pressure control have seen supply volume fluctuate due to pressure changes at the gas injection point of the molding machine. Plasteco's supercritical inert gas quantitative supply device maintains a constant supply mass and automatically adjusts the supply pressure to follow the pressure at the supply point, enabling precise control of the supply volume at all times and achieving uniform and fine foaming. Furthermore, by precisely controlling the gas addition amount through data linkage (optional) with extrusion and injection molding machines, stabilization of foaming ratios and reduction in the weight of molded products become possible. It can accommodate a wide range of applications, from small flow rates for small molding machines to large flow rates for large molding machines, as well as RIM molding and other uses. It also supports flow control, high-pressure compatibility, and other options, making it suitable for various applications.

• Extrusion Machine

Manufacturing of a complete set of molding systems and peripheral equipment, as a specialized manufacturer of safe, low-cost, and environmentally friendly foaming agents and inert gases (CO2, N2).

Plasteco Co., Ltd. is the world's only manufacturer specializing in foaming using inert gases (CO₂, N₂). We are capable of manufacturing a complete set of equipment, including supercritical inert gas extrusion foaming molding systems, gas quantitative supply devices, and dryers. Leveraging our long-standing experience and know-how cultivated through numerous sales achievements, we provide consistent and flexible support from raw materials to molding. ● Safe and inexpensive foaming agents ● High added value through ultra-fine foaming ● Reduction of greenhouse gases ● Raw material reduction through high expansion foaming ● Foaming of new materials such as biodegradable options is possible ● Comprehensive support from raw materials to molding

• Extrusion Machine

For precise liquid delivery of various fluids, from low flow to high flow and from watery to high viscosity, trust the high-pressure multipurpose pump from Plasteco! [Easy maintenance]

Choose from types based on your application!! ● Pump only (for device integration) ● Integrated control unit This is a plunger pump that supports high-pressure liquid delivery up to 40MPa as standard. It has a proven track record in our flagship product, the "Supercritical Inert Gas Quantitative Supply System." We offer a wide range of models with maximum flow rates from 10mL/min to 1000mL/min, allowing you to select according to your usage purpose, from small flow rates suitable for research and experiments to large flow rates for mass production. In addition to standard specifications, we also have a rich selection of options to accommodate special specifications such as high-viscosity fluids, high-temperature fluids, slurries, and supercritical fluids. Please consult us regarding your desired flow rate, operating pressure, and fluid. With high durability and a simple structure, self-maintenance by customers is also easy.

• Positive Displacement Pump

All-in-one dehumidifying, drying, and transporting machine with stirring function suitable for drying resins that easily fuse and adhere, such as bioplastics.

Suitable for bio-plastics such as PLA and PHA! ● Compatible with resins that are prone to fusion and adhesion due to stirring function ● Low dew point honeycomb adsorption tower type ● All-in-one for dehumidification, drying, and transportation The DryTeco-S HCF series is a dryer that compactly integrates three functions: dehumidification, drying, and transportation. It is equipped with a stirring device to prevent pellet adhesion, making it suitable for various plastic materials, especially bio-plastics (PLA, PHA, PBS, etc.) and hygroscopic engineering plastics (PA, PC, PBT, PET, etc.). It consists of a Japanese-made honeycomb rotor adsorption tower and an all-stainless steel insulated drying hopper. Safety devices: power reverse phase detection, over-temperature prevention, inspection port safety switch.

• Drying Equipment

Please consult with us. We overturn the conventional wisdom of plastic! Environmentally friendly, high value-added foaming technology.

The "Supercritical Inert Gas Foaming Technology" is a high-value-added micro-foaming technology that considers both people and the environment. It does not have the explosiveness or flammability of hydrocarbon-based physical foaming agents, so there is no need to make the equipment explosion-proof. It is also free from the toxicity of chemical foaming agents and has no residual effects, making it excellent for recycling. Our company provides comprehensive support from raw materials to the entire molding equipment and the development of the molding process. Additionally, our foaming molding machines come standard with extrusion molding and RIM molding. If you are considering foaming molding, please feel free to contact us. 【Features】 ■ The foaming agent is non-explosive and non-flammable, eliminating the need for explosion-proof equipment. ■ It has a low global warming potential, taking the global environment into consideration. ■ It is non-toxic and has no residual effects, making it excellent for recycling. ■ It is capable of forming fine bubbles of several micrometers. ■ It can also be applied to foaming of crystalline resins, which were difficult to foam at high ratios with conventional methods. *For more details, please refer to the PDF materials or feel free to contact us.

• Gas recovery/treatment equipment

The glass pot lid has a hydrophilic heat-resistant coating, allowing you to check the cooking state without any fogging.

SPACECOOL Co., Ltd. is pleased to announce its support for the purpose of the newly established memorial day "Day to End the Too Hot Summer" by the Japan Climate Leaders Partnership (JCLP). In order to address the increasingly severe heat waves, we will continue to promote the expansion of our zero-energy cooling radiative cooling material "SPACECOOL." JCLP has registered August 8, 2025, and every August 8 thereafter, as "Day to End the Too Hot Summer" with the Japan Anniversary Association. — What is the new memorial day "Day to End the Too Hot Summer"? In recent times, many regions in Japan have been experiencing consecutive days of extreme heat, and the impacts of climate change are manifesting in serious ways in our lives. Nevertheless, reports and discussions linking this to "climate change" are limited, and there is currently a lack of momentum for climate change measures. In response to this issue, JCLP has decided to establish the "Day to End the Too Hot Summer" during this hottest time of the year, creating a social impetus to reframe "heat" as a climate change issue. This memorial day aims to share the commitment to halt the climate crisis for future generations and serve as a starting point for advancing the systemic transformation of society as a whole.

Are you making progress on measures for the "2024 Problem"? With stricter management of drivers' working hours, reducing "waiting time" has become an urgent issue in the logistics field. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability situation, reducing unnecessary waiting and queueing, and shortening waiting times to alleviate the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start addressing the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult with us.

The following cameras are supported in the Elua 7.6 series. Product introduction: https://aileunsys.co.jp/b01_aileun.html Compatible camera list: https://aileunsys.co.jp/aileun/compatible_camera.html Newly added: - Manufacturer: DAHUA Model number (1 model): DH-IPC-HFW2449TLN-S-PRO

Dear Valued Customers, Thank you very much for your continued support. We would like to inform you that our company will be closed for summer vacation from Wednesday, August 13, 2025, to Friday, August 15, 2025. We will resume normal operations on Monday, August 18. We appreciate your understanding and cooperation.