Consideration for the Earth and Humanity: "100% Plant-Based, Biodegradable Foam Beads" Achieving Coexistence with Plastic

Both the raw resin and the foaming agent are entirely non-petroleum based! They do not generate excess CO2 during the manufacturing and disposal processes.

【Plant-based, biodegradable plastic foam bead material that is gentle on people and the Earth】 "Plant-based biodegradable foam beads" are 100% biodegradable products made using an environmentally friendly method that does not involve chemical foaming agents. Thanks to our unique "supercritical inert gas foaming molding technology," we have successfully molded foam beads from biodegradable resin PLA (polylactic acid), which was previously challenging. This high expansion foaming also allows for a reduction in raw materials. As global concern over plastic waste issues grows, this new environmentally friendly product can be applied in various fields such as fishing and agricultural tools, packaging materials, medical products, and decorative/display items. 【Features】 ■ 100% plant-based ■ 100% biodegradable ■ Carbon neutral ■ Low environmental impact foaming agents used *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

This is a block board made of biodegradable foam beads that are non-petroleum-based, carbon-neutral, and have low environmental impact. Ideal for packaging materials, cushioning, and various three-dimensional shapes!

Beads made from plant-derived, biodegradable resin PLA (polylactic acid) are foamed using a unique extrusion foaming technology developed by Plasteco, which utilizes low environmental impact inert gases (CO2, N2) and are then steam-formed into block and board shapes. They can be processed into your desired shape through cutting and other methods! They can be used as an alternative to traditional expanded polystyrene for packaging materials and cushioning, as well as for three-dimensional objects and display items. High expansion foaming with a safe and inexpensive foaming agent (inert gas) also allows for a reduction in raw materials! PLA resin, which has a high raw material cost, can be foamed and molded at a low cost.

• plastic

Products for three-dimensional modeling, decoration, and displays made using plant-based, biodegradable foam PLA beads shaped by our unique technology that considers both people and the Earth.

【PLA (Polylactic Acid) Microcellular Foam Products Considerate of People and the Earth】 Our unique "Inert Gas Foaming Technology" has successfully enabled the microcellular foaming of biodegradable resin PLA (Polylactic Acid) using environmentally friendly foaming agents such as carbon dioxide (CO2) and nitrogen (N2) at high ratios, which was previously difficult. By not using chemical foaming agents, our products are 100% biodegradable and carbon neutral. As a material that addresses global environmental issues, it can be freely shaped into food trays, packaging materials, fishing and agricultural supplies, medical products, as well as store displays, exhibition booths, stage decorations, and display items.

• Other polymer materials

Manufacturing of a complete set of molding systems and peripheral equipment, as a specialized manufacturer of safe, low-cost, and environmentally friendly foaming agents and inert gases (CO2, N2).

Plasteco Co., Ltd. is the world's only manufacturer specializing in foaming using inert gases (CO₂, N₂). We are capable of manufacturing a complete set of equipment, including supercritical inert gas extrusion foaming molding systems, gas quantitative supply devices, and dryers. Leveraging our long-standing experience and know-how cultivated through numerous sales achievements, we provide consistent and flexible support from raw materials to molding. ● Safe and inexpensive foaming agents ● High added value through ultra-fine foaming ● Reduction of greenhouse gases ● Raw material reduction through high expansion foaming ● Foaming of new materials such as biodegradable options is possible ● Comprehensive support from raw materials to molding

• Extrusion Machine

For precise liquid delivery of various fluids, from low flow to high flow and from watery to high viscosity, trust the high-pressure multipurpose pump from Plasteco! [Easy maintenance]

Choose from types based on your application!! ● Pump only (for device integration) ● Integrated control unit This is a plunger pump that supports high-pressure liquid delivery up to 40MPa as standard. It has a proven track record in our flagship product, the "Supercritical Inert Gas Quantitative Supply System." We offer a wide range of models with maximum flow rates from 10mL/min to 1000mL/min, allowing you to select according to your usage purpose, from small flow rates suitable for research and experiments to large flow rates for mass production. In addition to standard specifications, we also have a rich selection of options to accommodate special specifications such as high-viscosity fluids, high-temperature fluids, slurries, and supercritical fluids. Please consult us regarding your desired flow rate, operating pressure, and fluid. With high durability and a simple structure, self-maintenance by customers is also easy.

• Positive Displacement Pump

All-in-one dehumidifying, drying, and transporting machine with stirring function suitable for drying resins that easily fuse and adhere, such as bioplastics.

Suitable for bio-plastics such as PLA and PHA! ● Compatible with resins that are prone to fusion and adhesion due to stirring function ● Low dew point honeycomb adsorption tower type ● All-in-one for dehumidification, drying, and transportation The DryTeco-S HCF series is a dryer that compactly integrates three functions: dehumidification, drying, and transportation. It is equipped with a stirring device to prevent pellet adhesion, making it suitable for various plastic materials, especially bio-plastics (PLA, PHA, PBS, etc.) and hygroscopic engineering plastics (PA, PC, PBT, PET, etc.). It consists of a Japanese-made honeycomb rotor adsorption tower and an all-stainless steel insulated drying hopper. Safety devices: power reverse phase detection, over-temperature prevention, inspection port safety switch.

• Drying Equipment

Renewed with a new model! This is a gas supply device capable of precisely and stably supplying inert gases necessary for foam molding, such as carbon dioxide (CO2) and nitrogen (N2).

【Renewal & New Model Launch!】 - Smaller and lighter than the previous model - Equipped with a 12-inch large screen touch panel - Precise control of gas supply volume is possible through data linkage with various molding machines Foaming with CO₂ or N₂ experiences significant changes in bubble diameter and foaming conditions due to minor fluctuations in supply volume. Additionally, traditional pump methods using pressure control have seen supply volume fluctuate due to pressure changes at the gas injection point of the molding machine. Plasteco's supercritical inert gas quantitative supply device maintains a constant supply mass and automatically adjusts the supply pressure to follow the pressure at the supply point, enabling precise control of the supply volume at all times and achieving uniform and fine foaming. Furthermore, by precisely controlling the gas addition amount through data linkage (optional) with extrusion and injection molding machines, stabilization of foaming ratios and reduction in the weight of molded products become possible. It can accommodate a wide range of applications, from small flow rates for small molding machines to large flow rates for large molding machines, as well as RIM molding and other uses. It also supports flow control, high-pressure compatibility, and other options, making it suitable for various applications.

• Extrusion Machine

An automatic quantitative supply system for main materials (raw materials) and auxiliary materials (additives, etc.) that can be linked to an extrusion molding machine! Precise control of the raw material addition rate is possible!

This is a feeder that quantitatively supplies the main material (raw material) and auxiliary materials (additives, etc.) to the extrusion molding machine. It precisely controls the main feeder for the main material, the sub-feeder for the auxiliary material, and the gas (foaming agent), linking their respective addition rates. By combining it with Plasteco, a manufacturer specializing in inert gas foaming, extrusion molding machines, dehumidifying dryers with stirring, gas supply units, etc., it is possible to construct a "supercritical inert gas extrusion foaming system" that is more suitable for foaming.

• Powder Supply Device

The glass pot lid has a hydrophilic heat-resistant coating, allowing you to check the cooking state without any fogging.

SPACECOOL Co., Ltd. is pleased to announce its support for the purpose of the newly established memorial day "Day to End the Too Hot Summer" by the Japan Climate Leaders Partnership (JCLP). In order to address the increasingly severe heat waves, we will continue to promote the expansion of our zero-energy cooling radiative cooling material "SPACECOOL." JCLP has registered August 8, 2025, and every August 8 thereafter, as "Day to End the Too Hot Summer" with the Japan Anniversary Association. — What is the new memorial day "Day to End the Too Hot Summer"? In recent times, many regions in Japan have been experiencing consecutive days of extreme heat, and the impacts of climate change are manifesting in serious ways in our lives. Nevertheless, reports and discussions linking this to "climate change" are limited, and there is currently a lack of momentum for climate change measures. In response to this issue, JCLP has decided to establish the "Day to End the Too Hot Summer" during this hottest time of the year, creating a social impetus to reframe "heat" as a climate change issue. This memorial day aims to share the commitment to halt the climate crisis for future generations and serve as a starting point for advancing the systemic transformation of society as a whole.

Are you making progress on measures for the "2024 Problem"? With stricter management of drivers' working hours, reducing "waiting time" has become an urgent issue in the logistics field. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability situation, reducing unnecessary waiting and queueing, and shortening waiting times to alleviate the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start addressing the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult with us.

The following cameras are supported in the Elua 7.6 series. Product introduction: https://aileunsys.co.jp/b01_aileun.html Compatible camera list: https://aileunsys.co.jp/aileun/compatible_camera.html Newly added: - Manufacturer: DAHUA Model number (1 model): DH-IPC-HFW2449TLN-S-PRO

Dear Valued Customers, Thank you very much for your continued support. We would like to inform you that our company will be closed for summer vacation from Wednesday, August 13, 2025, to Friday, August 15, 2025. We will resume normal operations on Monday, August 18. We appreciate your understanding and cooperation.