[Online Seminar] Introduction to Monitoring for Machine Tools That You Want to Start - Part 1 - (June 5)

An ideal solution for detecting process anomalies during metal cutting with machine tools!

"GEMTP" is a power measurement module suitable for tool and process monitoring to avoid damage to workpieces. It supports 127 types of cycles and can connect to all machine controls via I/O signals. With multiple monitoring strategies (static, dynamic, area), it can be applied to various cutting processes. 【Features】 ■ Single-channel system for drive monitoring ■ Monitoring of tool conditions (breakage, wear, missing) ■ Supports 127 types of cycles ■ Can connect to all machine controls via I/O signals ■ Easy installation in control cabinets *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

Detects dynamic collisions and damage! Protects machines with a compact design that is easy to install inside control panels.

"GEMAMS" is a collision detection system that detects collisions during the autonomous operation of machine tools and robots using connected acceleration sensors. If the limit of a hard stop (such as an emergency stop) is exceeded, a stop signal is issued within 1 millisecond. This allows for the avoidance or minimization of damage to the machinery. Additionally, we also offer "GEMCMS," which detects collisions during autonomous operation or manual operation using piezoelectric force sensors. 【Features】 ■ 1 to 3-axis acceleration sensors can be connected via IEPE interface (standard specification) ■ All events are stored in event memory ■ Three operation modes ■ Three different limits can be set for each mode ■ Frequency analysis through FT evaluation *For more details, please refer to the PDF document or feel free to contact us.

• Other temperature and humidity measuring instruments

We provide highly reliable machine protection based on accelerometer signals.

"GEMAMS" is a highly efficient collision/crash detection system designed to minimize damage caused by collisions. It reduces crash detection time to under 1ms, allowing for precious time to be saved and enabling quicker execution of stop commands. Not only does it mitigate the economically costly damages caused by collisions within machine tools and robotic handling systems, but it also makes avoidance possible. 【Features】 ■ A highly efficient tool for minimizing damage from collisions ■ Crash detection time reduced to under 1ms ■ Quicker execution of stop commands ■ Capability to record critical processes for detailed analysis ■ Usable in standalone mode *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts
• Other temperature and humidity measuring instruments
• Other measurement, recording and measuring instruments

Opportunities for preventive maintenance of peripheral devices and process monitoring are possible! Additionally, highly reliable data can be obtained.

"GEMVM" is a standalone module that enables preventive maintenance of machines, peripheral equipment, and other systems through vibration monitoring and temperature monitoring. By detecting collisions and activating alarms quickly (in less than 1 ms), it maximally protects against damage caused by collisions. Based on available sensor signals and defined processing, it performs predictive maintenance, detects tool imbalance, and conducts simple tool/process monitoring. Additionally, when combined with the VA-3D MG sensor, it can measure up to 3-axis gravitational acceleration. 【Features】 ■ Detects damage to spindle bearings and wear or defects in drive shafts ■ Detects vibrations and tool imbalance during machining processes ■ Minimizes damage ■ Visualization and analysis of measurement data ■ Detects incorrect cutting parameters *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

When a collision occurs, the stop signal is activated within 1 ms! It minimizes damage as much as possible.

"GEMCMS" is a highly efficient tool designed to minimize damage caused by collisions. It reduces crash detection time to under 1ms, allowing for valuable time savings and enabling the execution of stop commands in an even shorter time. Additionally, special sensors detect any slight μ-range distortions within the machine structure caused by forces acting on each axis of the spindle. [Features] ■ Minimizes subsequent damage due to programming, setup, and operational errors ■ Reaction time is under 1ms, faster than any NC overload device ■ Capable of detecting both severe collisions and non-impact (quasi-static) collisions ■ Extends machine lifespan ■ Increases machine operating rate *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

Essential for economically efficient production! Introduction of autonomous intelligent tools and process monitoring systems.

We would like to introduce our tool and process monitoring system, 'GEMCPU'. The modular system utilizes all relevant process signals and data from machine tools, reacting in real-time after an event occurs. The system captures digital measurement data via a fieldbus interface or sensors, evaluates the data based on multiple criteria, and visualizes the process transparently. Trend or alarm reports enable users to optimize processes and produce more efficiently. 【Features】 ■ An economical solution even for simple applications ■ Can acquire up to 16 real-time measurement signals on up to 10 NC channels in parallel with the process ■ Virtually no need for troublesome adjustments or re-calibrations of the machine ■ Process signals are recorded and can be monitored online or offline * You can view the English version related link page. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

Can be connected to two sensors for strain and monitoring! You can use 127 types of cycles.

"GEMGP" is an ideal solution for detecting process anomalies during metal cutting with machine tools. We offer multiple monitoring modes: static, dynamic, and area monitoring. It is capable of monitoring tool conditions such as damage, wear, and loss. Furthermore, it supports multi-view functionality, allowing multiple modules to be used simultaneously with a single visualization. 【Features】 ■ Connectable to two sensors for force strain and monitoring ■ Multiple monitoring modes (static, dynamic, area) ■ Tool condition monitoring (damage, wear, loss) ■ Usable with 127 types of cycles ■ Connectable from digital I/O to full machine control *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

At Eihon Seiki, we handle Brookfield's rotational viscometers, which are widely used by many customers. We offer consulting services such as measurement method proposals and data analysis to assist our customers with viscometers and rheometers. As part of our ongoing commitment to customer service, we have planned a viscometer user seminar. We will invite Professor Toshiyuki Shikata, an emeritus professor at Tokyo University of Agriculture and Technology, who is active in the field of rheology, to give a lecture covering the basics of viscosity and an introduction to viscoelasticity. There will also be opportunities to ask questions to Professor Shikata and our technical staff regarding any issues or uncertainties you may have in your daily work. We encourage you to consider participating in this opportunity. Seminar Overview: - We will provide an easy-to-understand lecture on the basics of viscosity and viscosity measurement. - We will explain points that can help improve the reproducibility of daily measurements and maintenance within your company. - We will introduce the dispersion of solutions and stability evaluation through live demonstrations. - You will have the opportunity to ask questions directly to Professor Shikata and Eihon Seiki's technical staff.

[Key Lecture Content] 1. The current status of geothermal heat in our country and the Ministry of the Environment's initiatives for its promotion Ministry of the Environment, Water and Air Quality Bureau, Environmental Management Division, Environmental Pollution Control Office Assistant Director Matsui Tatsu 1. About geothermal heat 2. About groundwater heat 3. Utilization for energy conservation 4. Utilization for decarbonization 5. Q&A / Business card exchange 2. Technological trends of geothermal heat pumps and advanced examples from Japan and abroad Non-profit organization Geothermal Utilization Promotion Association Chairman Sasada Masakatsu 1. Overview of geothermal heat pumps and their energy-saving and environmental properties 2. Trends in closed-loop technology 3. Trends in open-loop technology 4. Technological trends of air conditioning systems using geothermal heat as a heat source 5. Future prospects for geothermal heat pumps 6. Q&A / Business card exchange

[Speaker] Cabinet Office, Government of Japan Science and Technology Innovation Promotion Office Planning Officer Takayuki Sato [Key Lecture Content] Japan's AI policy is structured around the fundamental directions of "balancing innovation promotion and risk response" and "international cooperation." In the AI Basic Plan established at the end of last year, we aim to pursue "trustworthy AI" that maintains a human-centered AI society where individual dignity is respected, enabling continuous collaboration between humans and AI. Our goal is to make Japan "the easiest country in the world to develop and utilize AI." This lecture will provide an overview of Japan's AI policies, including examples of initiatives. [Lecture Items] 1. Evolution and development trends of AI 2. Japan's AI policy (background of the AI law enactment, promotion system, etc.) 3. AI-related initiatives (AI Basic Plan, AI guidelines, etc.) 4. Q&A / Business card exchange

In this 5S seminar, we won't just stop at "organizing and tidying up." We will provide plenty of tips on how to utilize 5S as a "visualization of work" and a "tool for discovering waste," evolving the workplace into a more comfortable and productive environment! ✅ Improvement tips you can use starting tomorrow ✅ Engaging and practical exercises and workshops that will inspire and excite you From "doing it because I was told to" to "wanting to take action myself" Your step forward will lead to the evolution of the entire team. This is an opportunity to cultivate a "mindset for improvement" among young employees and enhance the autonomy of the entire organization. From "waiting for instructions" to "thinking and taking action" As you become more accustomed to your work, you will notice the waste and potential that exists. Now, let's gain the "power to change" with 5S! Benefits of 5S: 1. People grow 2. Time becomes more abundant 3. The workplace environment improves 4. 5S does not require significant costs 5. It can be implemented regardless of company size or job type 6. It is appreciated by stakeholders We will teach you the tips to transform 5S from something done because a superior said to do it, or only when there is time, into an enjoyable and sustainable practice. *For more details, please download the PDF or contact us.

This exhibition is one of the largest specialized symposiums in Japan, focusing on fullerenes, carbon nanotubes (CNT), graphene, nanomaterials, advanced materials, functional materials, and two-dimensional materials. Many researchers and engineers involved in material development, device applications, measurement and analysis, research and development, and mass production technology will attend. At our booth, we will introduce products and technological solutions that support research in nanocarbon, advanced material evaluation, device development, and industrial applications from fundamental research. ■ Planned Exhibits - Products from PicoQuant - Ultra-high stability interferometer "GEMINI" (NIREOS) - Superconducting nanowire single-photon detector (SNSPD) (Single Quantum) - Broadband wavelength-tunable laser 400–1000nm SuperK CHROMATUNE (NKT Photonics)