Invitation to Exhibit at the 2024 Global Warming Prevention Exhibition

Introducing the dewatering agent "Furodehai," which reduces the moisture content of dewatered sludge and can decrease waste volume and sludge treatment costs!

The dehydration aid "Flodeha" is a special fiber composed of shortcut fibers. This product is designed to improve dehydration efficiency and reduce sludge generation by adding a small amount of it to the sludge generated during wastewater treatment and performing dehydration treatment. 【Features】 - The capillary phenomenon effect and water guiding effect of the fibers discharge moisture from the sludge to the outside. - Excellent dispersion of sludge due to the special processing of the fibers. - Customizable dehydration aid proposals tailored to each dehydration machine mechanism. - Improvement of sludge dehydration efficiency with a small addition (1-4% relative to total solids). 【Effects】 - Reduces moisture content and decreases sludge discharge amount → Example: Approximately 25% reduction in dewatered sludge discharge. - Reduces CO2 emissions during sludge incineration → Example: Approximately 32% reduction in CO2 emissions. *For more details, please refer to the PDF document or feel free to contact us.

• Other filters

Rapidly decomposes to a molecular weight at which biodegradability manifests in the presence of water! Control over the practical period is also possible.

We would like to introduce our "Marine Biodegradable PLA Sheet." It was developed to address the issues of plastic residue in soil environments and microplastic problems in the ocean. By adding a "trigger substance" to PLA, it rapidly decomposes to a molecular weight at which biodegradability is expressed in the presence of water. 【Features】 ■ Enhanced biodegradability (control over practical usage period is also possible) ■ Plant-based raw materials *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

Using polyester nanofibers with a diameter of 700nm! It has good gas permeability and allows for low pressure loss operation!

The "Nano Front Bag Filter NFE Series" is a bag filter that uses polyester nanofibers with a diameter of 700nm as the filter medium. It offers good air permeability, enables low-pressure loss operation, and is expected to provide energy-saving and long-life effects. We can accommodate your desired sewing specifications. An electrostatic type is also available. 【Features】 ■ Efficiently collects dust and powders ■ Good air permeability and enables low-pressure loss operation ■ Expected energy-saving and long-life effects ■ Electrostatic type also available *For more details, please refer to the PDF document or feel free to contact us.

• Other filters
• Filtration Equipment

I want to achieve energy conservation, cost reduction, and CO2 reduction in the factory. The answer is the "optimization of airflow" in the dust collector.

The unnecessary excess airflow of the dust collector can be automatically optimized for airflow, achieving energy savings through the introduction of inverter control.

• inverter
• Bag Filter

Easy installation with high disaster prevention performance! Protects against flooding from the entrance! Simple type water stop sheet 'Tomppa TM'

Flood prevention from the entrance, "Tomeppa" protects you! - No tools required, can be installed by one person: Easy installation without tools - Excellent water stop performance: Equivalent to JIS standard Ws-5 water stop performance - Affordable introduction cost: Significantly lower price compared to water stop board construction

• Other safety and hygiene products
• Other services

Achieves a gloss level of over 70 with a hardness of 3H! Forced drying at low temperatures up to 100°C is also possible.

"Solfurio" is a two-component, solvent-based paint that combines acrylic silicone resin with spherical special fine ceramics. With its high surface hardness and smooth, beautiful glossy finish, it can be applied not only to building roofs but also to various industrial products made from different materials. The special fine ceramics evenly dispersed on the surface of the paint film efficiently reflect heat, suppressing its penetration into the interior. 【Features】 ■ Excellent heat insulation performance ■ High hardness and smooth appearance ■ Excellent workability ■ Quick-drying *For more details, please refer to the PDF materials or feel free to contact us. (If the PDF button is not displayed) ⇩The catalog can be downloaded from the special site below⇩

• paint

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

HP Inc. will hold the "HP Future of Work AI Conference 2025" at Tokyo International Forum, Hall B. At this event, under the message "Freedom to be particular about how we work," we will introduce the possibilities of on-device AI and its practical applications, along with case studies and technological trends. Whether you are considering implementing AI or have already started using it, you are sure to find hints for your next steps. We sincerely look forward to your attendance.

Nitto Kohki will exhibit at the "30th Mechanical Components Technology Exhibition [Tokyo]" held at Makuhari Messe Hall 5 from July 9 (Wednesday) to July 11 (Friday). [Booth Number: Hall 5 31-32] At this exhibition, we will showcase a variety of products, including the electric suction hand "e-VEE" with a built-in pump that does not require compressed air, a cordless belt sander, the electric driver "Delvo" that can be mounted on robots, and the "Flow Monitor" that allows for easy visualization of the flow of cooling water in molds and other applications.

Providing Solutions to Support Your Business Challenges We warmly invite you to visit our booth at K 2025 to learn more about our approach and explore our latest innovations. 【K 2025】 – The World's No.1 Trade Fair for Plastics and Rubber Exhibition Dates : October 8 (Wed) – October 15 (Wed), 2025 Venue : Messe Düsseldorf, Düsseldorf, Germany Opening Hours : 10:00 AM – 6:00 PM (local time) MATSUI Booth : Hall 11 – Booth I53

[Lecturer] Kazuhisa Yuki, Professor, Department of Mechanical Engineering, Faculty of Engineering, Yamaguchi University of Science and Technology [Key Lecture Content] Currently, the world is facing a serious energy crisis and environmental issues. Particularly, due to the rapidly growing highly information-oriented society, the power demand of global AI data centers is expected to double from the 2024 level, surpassing Japan's total electricity consumption. In the future, to achieve a rich highly information-oriented society while maintaining carbon neutrality, securing a cheap and stable power supply is essential, and energy conservation in data centers will become the most important challenge. Against this backdrop, two-phase liquid immersion cooling technology, which can significantly reduce power input associated with cooling while achieving high cooling performance, is attracting attention. In this lecture, we will discuss efficient cooling technologies for data centers, evaluated based on cooling performance (air cooling/liquid cooling/liquid immersion technology), and outline the potential and technical challenges of liquid immersion cooling technology in particular.