Plasteco, a manufacturer specializing in inert gas foaming, is committed to clean foaming that considers both people and the planet!

Manufacturing of a complete set of molding systems and peripheral equipment, as a specialized manufacturer of safe, low-cost, and environmentally friendly foaming agents and inert gases (CO2, N2).

Plasteco Co., Ltd. is the world's only manufacturer specializing in foaming using inert gases (CO₂, N₂). We are capable of manufacturing a complete set of equipment, including supercritical inert gas extrusion foaming molding systems, gas quantitative supply devices, and dryers. Leveraging our long-standing experience and know-how cultivated through numerous sales achievements, we provide consistent and flexible support from raw materials to molding. ● Safe and inexpensive foaming agents ● High added value through ultra-fine foaming ● Reduction of greenhouse gases ● Raw material reduction through high expansion foaming ● Foaming of new materials such as biodegradable options is possible ● Comprehensive support from raw materials to molding

• Extrusion Machine

Foamed sheets made from biodegradable resin PLA (polylactic acid) that are produced using environmentally friendly methods. They can be used for food trays, agricultural products, medical supplies, packaging, and cushioning materials.

Plasteco Co., Ltd. has consistently focused on "plastic production that considers people and the Earth" since its establishment. Through our unique technology that uses a safe inert gas with a low global warming potential to foam resins, we conduct research on plastic products and manufacturing methods that address environmental and resource issues, as well as the development and manufacturing of related equipment. With this technology, we have successfully achieved high-density foaming of plant-based biodegradable resins like PLA (polylactic acid), which were previously difficult to foam. Our foamed plastics are carbon neutral, derived from non-petroleum sources, and do not generate excess CO₂ during manufacturing and disposal processes, making them advanced materials that can be safely used in the future. Our foamed sheets are 100% biodegradable and do not use chemical foaming agents. Amid growing global concern over plastic waste, they can be applied in various fields as new environmentally friendly products, including food trays, packaging materials, and medical products. We have vacuum forming equipment and molds for testing, allowing for prototyping from sheets to formed products.

• plastic

This is a block board made of biodegradable foam beads that are non-petroleum-based, carbon-neutral, and have low environmental impact. Ideal for packaging materials, cushioning, and various three-dimensional shapes!

Beads made from plant-derived, biodegradable resin PLA (polylactic acid) are foamed using a unique extrusion foaming technology developed by Plasteco, which utilizes low environmental impact inert gases (CO2, N2) and are then steam-formed into block and board shapes. They can be processed into your desired shape through cutting and other methods! They can be used as an alternative to traditional expanded polystyrene for packaging materials and cushioning, as well as for three-dimensional objects and display items. High expansion foaming with a safe and inexpensive foaming agent (inert gas) also allows for a reduction in raw materials! PLA resin, which has a high raw material cost, can be foamed and molded at a low cost.

• plastic

Renewed with a new model! This is a gas supply device capable of precisely and stably supplying inert gases necessary for foam molding, such as carbon dioxide (CO2) and nitrogen (N2).

【Renewal & New Model Launch!】 - Smaller and lighter than the previous model - Equipped with a 12-inch large screen touch panel - Precise control of gas supply volume is possible through data linkage with various molding machines Foaming with CO₂ or N₂ experiences significant changes in bubble diameter and foaming conditions due to minor fluctuations in supply volume. Additionally, traditional pump methods using pressure control have seen supply volume fluctuate due to pressure changes at the gas injection point of the molding machine. Plasteco's supercritical inert gas quantitative supply device maintains a constant supply mass and automatically adjusts the supply pressure to follow the pressure at the supply point, enabling precise control of the supply volume at all times and achieving uniform and fine foaming. Furthermore, by precisely controlling the gas addition amount through data linkage (optional) with extrusion and injection molding machines, stabilization of foaming ratios and reduction in the weight of molded products become possible. It can accommodate a wide range of applications, from small flow rates for small molding machines to large flow rates for large molding machines, as well as RIM molding and other uses. It also supports flow control, high-pressure compatibility, and other options, making it suitable for various applications.

• Extrusion Machine

For precise liquid delivery of various fluids, from low flow to high flow and from watery to high viscosity, trust the high-pressure multipurpose pump from Plasteco! [Easy maintenance]

Choose from types based on your application!! ● Pump only (for device integration) ● Integrated control unit This is a plunger pump that supports high-pressure liquid delivery up to 40MPa as standard. It has a proven track record in our flagship product, the "Supercritical Inert Gas Quantitative Supply System." We offer a wide range of models with maximum flow rates from 10mL/min to 1000mL/min, allowing you to select according to your usage purpose, from small flow rates suitable for research and experiments to large flow rates for mass production. In addition to standard specifications, we also have a rich selection of options to accommodate special specifications such as high-viscosity fluids, high-temperature fluids, slurries, and supercritical fluids. Please consult us regarding your desired flow rate, operating pressure, and fluid. With high durability and a simple structure, self-maintenance by customers is also easy.

• Positive Displacement Pump

All-in-one dehumidifying, drying, and transporting machine with stirring function suitable for drying resins that easily fuse and adhere, such as bioplastics.

Suitable for bio-plastics such as PLA and PHA! ● Compatible with resins that are prone to fusion and adhesion due to stirring function ● Low dew point honeycomb adsorption tower type ● All-in-one for dehumidification, drying, and transportation The DryTeco-S HCF series is a dryer that compactly integrates three functions: dehumidification, drying, and transportation. It is equipped with a stirring device to prevent pellet adhesion, making it suitable for various plastic materials, especially bio-plastics (PLA, PHA, PBS, etc.) and hygroscopic engineering plastics (PA, PC, PBT, PET, etc.). It consists of a Japanese-made honeycomb rotor adsorption tower and an all-stainless steel insulated drying hopper. Safety devices: power reverse phase detection, over-temperature prevention, inspection port safety switch.

• Drying Equipment

An automatic quantitative supply system for main materials (raw materials) and auxiliary materials (additives, etc.) that can be linked to an extrusion molding machine! Precise control of the raw material addition rate is possible!

This is a feeder that quantitatively supplies the main material (raw material) and auxiliary materials (additives, etc.) to the extrusion molding machine. It precisely controls the main feeder for the main material, the sub-feeder for the auxiliary material, and the gas (foaming agent), linking their respective addition rates. By combining it with Plasteco, a manufacturer specializing in inert gas foaming, extrusion molding machines, dehumidifying dryers with stirring, gas supply units, etc., it is possible to construct a "supercritical inert gas extrusion foaming system" that is more suitable for foaming.

• Powder Supply Device

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The particle visualization technology developed under our brand "ViEST" has a very high level of detection sensitivity that allows for real-time visualization of the suspended and adhered states of micro and nano-sized particles. We are expanding our sales of visualization systems and contract services for evaluation (investigating particles and airflow in production processes, inside and outside manufacturing equipment, evaluating the performance of cleaning products, proposing yield improvement measures, etc.) both domestically and internationally. At this exhibition, we will demonstrate our particle visualization system along with three new products that were just released last year. Please experience the excitement of high particle detection performance and visualization at the venue. 【Date】 September 17 (Wed) - September 19 (Fri), 2025 【Time】 10:00 AM - 5:00 PM 【Venue】 Makuhari Messe, Hall 6 E20-21 Free entry. Pre-registration for attendance is required on the organizer's website. https://www.wsew.jp/autumn/ja-jp.html#/

In response to the rapid advancement of chiplet integration*¹ and finer wiring in semiconductor package substrates—driven by the explosive growth of the AI market—we are pleased to announce the launch of our next-generation semiconductor package substrate AOI system, the “SX7000” series, and our “LX7000” laser repair system. Orders are now being accepted. *1 A technology that divides what was traditionally integrated on a single large silicon die into multiple smaller chips, each responsible for a specific function, and connects them at high speed within a single package. This approach is increasingly being adopted in high-performance processors for AI applications. ■Line/Space SX7400：1.5μm/1.5μm～ SX7300：2μm/2μm～ LX7000：2μm/2μm～ ■Target product size SX7400：615mm × 515mm SX7300：615mm × 515mm LX7000：615mm × 515mm

The "HM-S6" is an embedded park sensor that detects vehicles through changes in magnetic flux and can respond to various situations from passing to stationary. It can be used for the opening and closing of the input doors at waste treatment plants, as well as for gates where vehicles pass and in outdoor parking applications. It can also be installed on rebar and steel plates. 【Features】 - Resistant to the effects of natural environments such as rain, snow, temperature changes, and geomagnetism. - Protection rating IP68 reduces the risk of water ingress. - Ten times the load capacity compared to conventional embedded park sensors (according to our comparison). - Can distinguish between vehicles even when they pass continuously, one by one. - Can be installed on rebar and steel plates. *For more details, please refer to the PDF document or feel free to contact us.