We will exhibit at the "42nd Annual Conference of the Robotics Society of Japan" held at Osaka Institute of Technology Umeda Campus.

Top brand of DC micro motor drive systems in Germany and Switzerland: Faulhaber. Delivering cutting-edge technology worldwide.

The FAULHABER motion controller integrated brushless DC servo motor 2232…BX4 IMC RS/CO has a total length of 49.6 mm and an output shaft diameter of 22 mm. It can be set within a speed range of 1 ... 13000 (rpm) and can operate with a maximum torque of 36 (mNm).

• Brushless DC Motor

Top brand of DC micro motor drive systems in Germany and Switzerland: Faulhaber. Delivering cutting-edge technology worldwide.

The FAULHABER motion controller integrated brushless DC servo motor 2250...BX4 IMC RS/CO has a total length of 67.6 mm and an output shaft diameter of 22 mm. It can be set within a speed range of 1 ... 10500 (rpm) and can operate with a maximum torque of 54 (mNm).

• Brushless DC Motor

The new compact versions of the linear actuators "L Series" utilizing the latest GPT gear technology: "06L/08L/10L" series.

The FAULHABER gearhead linear actuator, high load 06L ... HL, can be driven with a motor diameter of 6mm and a maximum pulse count of 12000 min⁻¹ per revolution.

• DC Motor

Excellent thrust-to-volume ratio. No residual thrust. Moreover, both acceleration and repeat position accuracy are at a high level.

The FAULHABER linear DC servo motor, LM 2070…12, is equipped with a gear head with an output shaft diameter of 2 mm and a maximum thrust of 27.6 N, with a stroke of 40 ... 220 mm, reproducibility of 100 μm, accuracy of 500 μm, and can be driven at a maximum speed of 2.8 m/s.

• DC Motor

Excellent thrust-to-volume ratio. No residual thrust. Moreover, both acceleration and repeat position accuracy are at a high level.

The FAULHABER linear DC servo motor, LM 2070…11, is equipped with a gear head with an output shaft diameter of 2 mm and a maximum thrust of 27.6 N, with a stroke of 40 ... 220 mm. It has a reproducibility of 60 μm, an accuracy of 200 μm, and can operate at a maximum speed of 2.8 m/s.

• DC Motor

Excellent thrust-to-volume ratio. No residual thrust. Moreover, both acceleration and repeat position accuracy are at a high level.

The FAULHABER linear DC servo motor, LM 1483…12, is equipped with a gear head that has an output shaft diameter of 2 mm and a maximum thrust of 18.4 N, with a stroke of 20 … 80 mm, reproducibility of 80 μm, accuracy of 260 μm, and a maximum speed of 3.4 m/s.

• DC Motor

Excellent thrust relative to volume ratio. No residual thrust. Moreover, both acceleration and repeat position accuracy are at a high level.

The FAULHABER linear DC servo motor, LM 1483…11, is equipped with a gear head that has an output shaft diameter of 2 mm and a maximum thrust of 18.4 N, with a stroke of 20 ... 80 mm, reproducibility of 40 μm, accuracy of 180 μm, and can operate at a maximum speed of 3.4 m/s.

• DC Motor

Excellent thrust relative to volume ratio. No residual thrust. Moreover, both acceleration and repeat position accuracy are at a high level.

The FAULHABER linear DC servo motor, LM 1247…12, is equipped with a gear head that has an output shaft diameter of 6 mm and a maximum thrust of 10.7 N, with a stroke range of 20 ... 120 mm, reproducibility of 80 μm, accuracy of 200 μm, and a maximum speed of 3.2 m/s.

• DC Motor

Excellent thrust-to-volume ratio. No residual thrust. Moreover, the acceleration and repeat position accuracy are also at a high level.

The FAULHABER linear DC servo motor, LM 1247…11, is equipped with a gear head with an output shaft diameter of 6 mm and a maximum thrust of 10.7 N, with a stroke range of 20 ... 120 mm, reproducibility of 40 μm, accuracy of 120 μm, and a maximum speed of 3.2 m/s.

• DC Motor

Excellent thrust-to-volume ratio. No residual thrust. Moreover, both acceleration and repeat position accuracy are at a high level.

The FAULHABER linear DC servo motor, LM 0830 … 01, features a gear head with an output shaft diameter of 0.03 mm and a maximum thrust of 2.74 N, with a stroke range of 15 ... 40 mm, reproducibility of 40 μm, accuracy of 120 μm, and a maximum speed of 2.4 m/s.

• DC Motor

A flat-type servo motor with a long-lasting brushless rectifier and a high volume-to-output ratio. Combined with a gear head to achieve the desired output.

The FULHABER brushless flat DC servo motor 2214…BXT R has a diameter of 22 mm and a total length of 14 mm, and it can be set within a speed range of 10,000 (rpm), capable of driving with a maximum torque of 29.6 (mNm).

• Brushless DC Motor

A flat-type servo motor with a long lifespan brushless rectifier, featuring a high volume-to-output ratio. Combined with a gear head to achieve the desired output.

The FULHABER brushless flat DC servo motor 3216…BXT R has a diameter of 32 mm and a total length of 16 mm, and it can be set within a speed range of 10,000 (rpm), capable of driving with a maximum torque of 263 (mNm).

• Brushless DC Motor

A flat-type servo motor with a long-lasting brushless rectifier and a high volume-to-output ratio. Combined with a gear head to achieve the desired output.

The FULHABER brushless flat DC servo motor 4221…BXT R has a diameter of 42 mm and a total length of 21 mm. It can be set within a speed range of 10,000 rpm and can operate with a maximum torque of 1390 mNm.

• Brushless DC Motor

A flat-type servo motor with a long-lasting brushless rectifier and a high volume-to-output ratio. Combined with a gear head to achieve the desired output.

The FULHABER brushless flat DC servo motor 2214…BXT H has an outer diameter of 22 mm and a total length of 14 mm, and it can be set within a speed range of 10,000 (rpm), capable of driving with a maximum torque of 29.6 (mNm).

• Brushless DC Motor

A flat-type servo motor with a long lifespan brushless rectifier and high volume-to-output ratio. Achieves the desired output when combined with a gear head.

The FULHABER brushless flat DC servo motor 3216…BXT H has an outer diameter of 32 mm and a total length of 16 mm. It can be set within a speed range of 10,000 (rpm) and can operate with a maximum torque of 263 (mNm).

• Brushless DC Motor

A flat-type servo motor with a long-lasting brushless rectifier and a high volume-to-output ratio. Combined with a gear head to achieve the desired output.

The FULHABER brushless flat DC servo motor 4221…BXT H has an outer diameter of 42 mm and a total length of 21 mm. It can be set within a speed range of 10,000 (rpm) and can operate with a maximum torque of 1390 (mNm).

• Brushless DC Motor

The new compact version of the linear actuators "L Series" utilizing the latest GPT gear technology, the "06L/08L/10L" series.

The FAULHABER gearhead linear actuator, high load 06L ... SL, can be driven with a motor diameter of 6mm and a maximum pulse count of 12000 min⁻¹ per revolution.

• DC Motor

The new compact version of the linear actuator "L Series" utilizing the latest GPT gear technology, the "06L/08L/10L" series.

The FAULHABER gearhead linear actuator, high load 08L ... HL, can be driven with a motor diameter of 8mm and a maximum pulse count of 12000 min⁻¹ per revolution.

• DC Motor

The new compact version of the linear actuator "L Series" utilizing the latest GPT gear technology, the "06L/08L/10L" series.

The FAULHABER gearhead linear actuator, high load 08L ... SL, can be driven with a motor diameter of 8mm and a maximum pulse count of 12000 min⁻¹ per revolution.

• DC Motor

The new compact version of the linear actuator "L Series" utilizing the latest GPT gear technology, the "06L/08L/10L" series.

FAULHABER's gearhead linear actuator, high load 10L ... SL can be driven with a motor diameter of 10mm and a maximum pulse count of 12000 min⁻¹ per revolution.

• DC Motor

[Speaker] Daisuke Imaizumi, President and CEO, Infra Commons Inc. [Key Lecture Content] The "Software-Defined Warfare" led by the U.S. Department of Defense is establishing a new model of warfare centered on AI, autonomous drones, and real-time command and control. This seminar will explain the U.S. strategic shifts, including the Replicator concept, JADC2, and the rise of Palantir and Anduril, while delving into the essence of the structural transformation facing Japan's defense industry. Through the establishment of Anduril's Japanese subsidiary, the "purely domestic drone" concept, and Palantir's data infrastructure and generative AI deployment, we will present how companies like Mitsubishi Heavy Industries, Kawasaki Heavy Industries, Fujitsu, and NEC can play a central role in Japan-U.S. collaboration. We will provide practical insights for existing industries to carve out paths as "co-creation partners" rather than "enemies" in the AI and software-driven era. This is a must-see lecture for rethinking the future of the defense industry.

[Key Lecture Content] 1. Quantum Technology Opening the Future: The Cutting Edge of Quantum Communication Promoted by the Ministry of Internal Affairs and Communications Yuichiro Yano, Deputy Director, Research Promotion Office, Technology Policy Division, International Strategy Bureau, Ministry of Internal Affairs and Communications 1. Basics of Quantum Technology and the Role of the Ministry of Internal Affairs and Communications 2. The Future Brought by Quantum Technology and Government Strategy 3. Research and Development and Quantum Security Bases 4. Social Implementation of Quantum Technology and Use Cases 5. International Initiatives and Future Prospects 6. Q&A / Business Card Exchange 2. The Value and Potential of Quantum Cryptography in the Post-Quantum Era Go Kato, Director, Quantum ICT Research Laboratory, Future ICT Research Institute, National Institute of Information and Communications Technology 1. The Origin of the Security of Quantum Cryptography 2. Current Status of Quantum Cryptography Devices 3. Current Issues and Potential of Quantum Cryptography Technology 4. Long-term Prospects for Future Technological Development of Quantum Cryptography 5. Q&A / Business Card Exchange

[Key Lecture Content] 1. Trends and Future Prospects of Physical AI Hiroshi Kondo, Deputy Director and Expert, Advanced Technology Lab, Japan Research Institute, Ltd. 1. What is Physical AI? 2. Technological trends of generative AI behind Physical AI 3. Examples and research trends of Physical AI 4. Future prospects 5. Q&A / Business card exchange 2. The Future Opened by Physical AI: NVIDIA's Initiatives and Prospects Ken Arai, Senior Manager, Robotics Developer Relations, Enterprise Business Division, NVIDIA Corporation 1. What does NVIDIA perceive as "Physical AI"? 2. Accelerated computing supporting technological evolution 3. The role of digital twins and the importance of synthetic data generation 4. Learning and inference of Physical AI models 5. Implementation examples of Physical AI 6. Q&A / Business card exchange

We are pleased to announce the archive distribution of our seminar titled "New Plan 'Mojitori Plus' Debuts! From Paper to Data! The First Step in Internal DX with Mojitori." 'Mojitori' allows you to convert text from photos, images, PDF files, and more into data, automatically inputting it into various fields in kintone. In this seminar, we will clearly explain the basic functions and usage of Mojitori. Additionally, we will provide detailed explanations about the Plus plan and the document-focused Mojitori, which were added in the major update in November. 【Recommended for】 - Those who are struggling with frequent transcription errors due to manual data entry. - Those who wish to digitize documents currently stored on paper. 【Timetable】 - Overview of Mojitori's functions - Overview of Mojitori Plus's functions - Details and pricing of each plan - Q&A session We look forward to your registration.

Innovating material development at the nano level through high-speed molecular simulation and machine learning With the advancement of molecular simulation technology, it has become possible to handle nano-level phenomena through computer simulations. Additionally, the combination of simulation and machine learning is expanding the range of possibilities. Schrödinger supports the enhancement of analytical power, efficiency, and reduction of development time in your material development using the latest molecular simulation and machine learning technologies, as well as techniques that integrate both. At our exhibition booth, specialized technicians will explain the latest technologies and answer questions from attendees. *During the event, we will hold a seminar at our booth. Theme: "Seeing Inside Materials at the Nano Level" - New Material Development through Simulation and Machine Learning We will introduce examples of predicting physical property values of various materials on a computer. You can experience each software firsthand. 【Exhibition Information】 Exhibition Name: nano tech Dates: January 28-30, 2026 Venue: Tokyo Big Sight, West Hall 3 Booth Number: 3W-H07 Exhibition Zone: [Materials] Material Zone