[Online Seminar] How Things Changed After I Started! Case Studies of Monitoring System Implementation and What Happened Next - Verification Edition - (September 25)

An ideal solution for detecting process anomalies during metal cutting with machine tools!

"GEMTP" is a power measurement module suitable for tool and process monitoring to avoid damage to workpieces. It supports 127 types of cycles and can connect to all machine controls via I/O signals. With multiple monitoring strategies (static, dynamic, area), it can be applied to various cutting processes. 【Features】 ■ Single-channel system for drive monitoring ■ Monitoring of tool conditions (breakage, wear, missing) ■ Supports 127 types of cycles ■ Can connect to all machine controls via I/O signals ■ Easy installation in control cabinets *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

Detects dynamic collisions and damage! Protects machines with a compact design that is easy to install inside control panels.

"GEMAMS" is a collision detection system that detects collisions during the autonomous operation of machine tools and robots using connected acceleration sensors. If the limit of a hard stop (such as an emergency stop) is exceeded, a stop signal is issued within 1 millisecond. This allows for the avoidance or minimization of damage to the machinery. Additionally, we also offer "GEMCMS," which detects collisions during autonomous operation or manual operation using piezoelectric force sensors. 【Features】 ■ 1 to 3-axis acceleration sensors can be connected via IEPE interface (standard specification) ■ All events are stored in event memory ■ Three operation modes ■ Three different limits can be set for each mode ■ Frequency analysis through FT evaluation *For more details, please refer to the PDF document or feel free to contact us.

• Other temperature and humidity measuring instruments

We provide highly reliable machine protection based on accelerometer signals.

"GEMAMS" is a highly efficient collision/crash detection system designed to minimize damage caused by collisions. It reduces crash detection time to under 1ms, allowing for precious time to be saved and enabling quicker execution of stop commands. Not only does it mitigate the economically costly damages caused by collisions within machine tools and robotic handling systems, but it also makes avoidance possible. 【Features】 ■ A highly efficient tool for minimizing damage from collisions ■ Crash detection time reduced to under 1ms ■ Quicker execution of stop commands ■ Capability to record critical processes for detailed analysis ■ Usable in standalone mode *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts
• Other temperature and humidity measuring instruments
• Other measurement, recording and measuring instruments

Opportunities for preventive maintenance of peripheral devices and process monitoring are possible! Additionally, highly reliable data can be obtained.

"GEMVM" is a standalone module that enables preventive maintenance of machines, peripheral equipment, and other systems through vibration monitoring and temperature monitoring. By detecting collisions and activating alarms quickly (in less than 1 ms), it maximally protects against damage caused by collisions. Based on available sensor signals and defined processing, it performs predictive maintenance, detects tool imbalance, and conducts simple tool/process monitoring. Additionally, when combined with the VA-3D MG sensor, it can measure up to 3-axis gravitational acceleration. 【Features】 ■ Detects damage to spindle bearings and wear or defects in drive shafts ■ Detects vibrations and tool imbalance during machining processes ■ Minimizes damage ■ Visualization and analysis of measurement data ■ Detects incorrect cutting parameters *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

When a collision occurs, the stop signal is activated within 1 ms! It minimizes damage as much as possible.

"GEMCMS" is a highly efficient tool designed to minimize damage caused by collisions. It reduces crash detection time to under 1ms, allowing for valuable time savings and enabling the execution of stop commands in an even shorter time. Additionally, special sensors detect any slight μ-range distortions within the machine structure caused by forces acting on each axis of the spindle. [Features] ■ Minimizes subsequent damage due to programming, setup, and operational errors ■ Reaction time is under 1ms, faster than any NC overload device ■ Capable of detecting both severe collisions and non-impact (quasi-static) collisions ■ Extends machine lifespan ■ Increases machine operating rate *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

Essential for economically efficient production! Introduction of autonomous intelligent tools and process monitoring systems.

We would like to introduce our tool and process monitoring system, 'GEMCPU'. The modular system utilizes all relevant process signals and data from machine tools, reacting in real-time after an event occurs. The system captures digital measurement data via a fieldbus interface or sensors, evaluates the data based on multiple criteria, and visualizes the process transparently. Trend or alarm reports enable users to optimize processes and produce more efficiently. 【Features】 ■ An economical solution even for simple applications ■ Can acquire up to 16 real-time measurement signals on up to 10 NC channels in parallel with the process ■ Virtually no need for troublesome adjustments or re-calibrations of the machine ■ Process signals are recorded and can be monitored online or offline * You can view the English version related link page. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

Can be connected to two sensors for strain and monitoring! You can use 127 types of cycles.

"GEMGP" is an ideal solution for detecting process anomalies during metal cutting with machine tools. We offer multiple monitoring modes: static, dynamic, and area monitoring. It is capable of monitoring tool conditions such as damage, wear, and loss. Furthermore, it supports multi-view functionality, allowing multiple modules to be used simultaneously with a single visualization. 【Features】 ■ Connectable to two sensors for force strain and monitoring ■ Multiple monitoring modes (static, dynamic, area) ■ Tool condition monitoring (damage, wear, loss) ■ Usable with 127 types of cycles ■ Connectable from digital I/O to full machine control *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

We will be exhibiting at the "Food Industry Creation Exhibition '25" scheduled to be held from May 14 (Wednesday) to May 16 (Friday) at Marine Messe Fukuoka. We will showcase measuring instruments ideal for food quality and hygiene management, such as fryer oil deterioration testers and food thermometers. Our instruments can connect to the mobile app testo Smart, allowing you to save measurement values in the app and document them in PDF format, supporting the efficiency of daily fryer oil and temperature management tasks!

The Pharmaceutical and Cosmetic Manufacturing Exhibition is the largest international exhibition in Japan for the pharmaceutical and cosmetic manufacturing sector, featuring 900 companies from both domestic and international markets and attracting 34,000 attendees. A wide range of products and services supporting the pharmaceutical and cosmetic manufacturing processes will be showcased, including manufacturing and packaging, plant engineering, CMO/CDMO, measurement and inspection, sterilization and cleaning, logistics and distribution. We will be waiting for you with a wide selection of environmental monitoring systems, including testo Saveris 1 and data loggers.

[Speaker] Ryo Shu, President and CEO of Marketing Eyes Inc. [Key Lecture Content] In 2026, AI will become the "eyes" of customers, allowing them to compare and select before meeting. BtoB sales will find it increasingly difficult to achieve results through "selling." This lecture will focus on designing how to be "chosen," which influences sales, covering (1) customer understanding (surface intentions, true feelings, latent desires), (2) hypothesis development (preparing to decide the outcome before negotiations, creating materials to advance internal approvals, positioning for high added value), and (3) organizational strength (eliminating dependency on individuals to create a successful cycle), illustrated with examples of corporate successes and failures. Please apply the three takeaway sheets to your actions starting tomorrow. [Lecture Items] 1. Why will traditional "sales" no longer be effective in 2026? 2. Enhancing customer understanding - how to capture their hearts. 3. Developing strategic planning skills - how to design by working backward from goals. 4. Organizational strength (eliminating dependency on individuals and creating reproducible models). 5. Conclusion. 6. Q&A.

Today, the manufacturing site is facing a labor shortage. Therefore, it cannot function without part-time workers, temporary employees, and foreign nationals. This is not limited to the manufacturing sector. The key is how to efficiently and smoothly train these individuals in a short period to produce quality products through actual work. Simply showing a video does not count as teaching. "Watch this video." "If you don't understand, ask." New employees often feel they cannot ask questions even when they don't understand, and they may say, "It's just like the video" even if they make mistakes. If the other person does not remember, it is because you have not taught them. This seminar will help you acquire effective teaching methods and improve the skills of those who teach. As a result, workers on the shop floor will perform tasks following unified procedures, significantly enhancing quality and productivity. Even new employees or foreign workers can become immediate assets in a short period. By honing the "ability to teach," we will create a system that ensures workers adhere to the established procedures and do not revert to old habits. *For more details, please download the PDF or contact us.

【Utilization of Flow Data for Beginners】 "What can be done? What are the costs?" Understand the overall picture, examples, demos, and pricing in just 30 minutes! Are you interested in utilizing flow data but have questions like, "Where should I start?" or "I can't envision the implementation effects and costs"? Flow data is gaining attention in various fields such as store planning, area marketing, and promotional measures. This seminar is a "mini introductory seminar" designed to resolve the questions of busy individuals who feel they can't take the first step due to a lack of specific information in just 30 minutes. We will explain the "overall picture" of flow analysis services, "specific utilization scenarios," and "cost concerns" in easy-to-understand terms. Additionally, we will include a demonstration using actual service screens to concretely introduce the image of utilization after implementation and the process leading up to it.