Notice of Participation in 'Thermal Technology 2024' from October 10 (Thursday) to October 11 (Friday), 2024.

All sampling equipment is built-in, completing oxygen measurement with just one device!

■ Ideal for spot checks ■ Simple operability ■ Choose from PPM model or % model ■ For measuring atmosphere in furnaces ■ For measuring atmosphere in tanks This product is an all-in-one portable oxygen meter equipped with a sampling device necessary for oxygen measurement. It includes a filter, pump, needle valve (built into the oxygen meter), flow meter (built into the oxygen meter), ball valve for sealing the oxygen sensor, and a bypass line. This allows for complete oxygen measurement in general environmental conditions. Additionally, for applications with a lot of dust, an external pre-filter is available as an option. The oxygen concentration meter is equipped with the AMI galvanic cell oxygen meter 2001LC (for ppm measurement) or 201LC (for % measurement), which are well-regarded for measuring oxygen in furnaces. For more details, please download the catalog.

• Other electronic measuring instruments

An all-in-one unit that completes moisture measurement in oil!

★It can be installed as is and used immediately! ■ Polymer-based oil moisture meter ■ Moisture activity value measurement range 0-1 aw ■ Measurement in ppm is possible ■ TFT display option available* *There are also selection options such as a patrol light, so please refer to the basic information. The core moisture detection component of the EE360 oil moisture meter installed in TKZH002 uses a polymer sensor utilizing thin-film technology. *Only for the EE33 temperature and humidity dew point transmitter for high humidity and harsh environments. It is a high-performance, high-response moisture meter with minimal aging changes. Since it provides continuous online measurements, it alerts you to moisture levels and the timing for oil replacement before water contamination affects insulation performance.

• Other electronic measuring instruments

★Demo unit available for loan★ - Domestic dew point meter capable of measuring dew points from -100 to +20 ℃dp.

● Domestic development and manufacturing ● Dew point measurement from -100 to +20 ℃dp ● Accuracy ±2 ℃dp ● Usually in stock ● Comprehensive support system ● Traceability available ■ Techne Measurement Co., Ltd. has been handling moisture management and measurement instruments centered around dew point meters for the past 40 years. The capacitive (impedance) TK-100 online dew point meter is a flagship product of Techne Measurement Co., Ltd. The TK-100 online dew point meter consists of the TK-100 transmitter, monitor, and sensor cable, allowing for easy initiation of dew point measurement. For more details, please download the catalog or contact us. #MoistureMeter

• Temperature and humidity measuring instruments

High-precision mirror-type dew point meter. It has a built-in pump, flow meter, and pressure sensor, allowing for accurate low dew point measurements.

● Dew point measurement range: -75 ℃dp to +20 ℃dp (MBW973S/E/CA) ● Realization of high response speed with ORIS function ● Built-in pump, flow meter, and pressure sensor (varies by model) ● Equipped with Stirling cooler (only for 973L) ■ The MBW973 dew point meter uses the ORIS (Optimum Response Injection System) function to forcibly add a small amount of moisture to the mirror surface, increasing the amount of condensation on the mirror surface. This achieves a reduction in the time required to stabilize in low dew point regions. Additionally, with the built-in pump, flow meter, and pressure sensor, measurements can be started immediately. Model selection examples: 【Low dew point range up to -80 degrees】→ MBW973L 【Low dew point range up to -60 degrees】→ MBW973S For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

We will be exhibiting at the "Kyushu Printing Information Industry Exhibition 2026" held at the Fukuoka International Center. During the event, we will showcase various products. We invite all related parties to come together and visit us. 【Suppliers】 ・Laser-X

This year, Toyota Kikan will exhibit at the Toyota Business Fair. We will introduce products that are useful for heatstroke prevention and more. Our top recommendation is SPACECOOL. Please feel free to visit our booth! SPACECOOL is an "eco-friendly cooling solution" essential for the future of our planet's environment! Be sure to check it out. Also, take a look at the basic knowledge for heat prevention in factories moving forward.

In the operation of drawings, do you face challenges such as "taking too long to find," "uncertainty about whether it's the latest version," or "high likelihood of confirmation errors"? By utilizing CADSUPER's barcode function (optional), you can reliably connect drawings and information, allowing for a smooth advancement of DX in drawing utilization. In this seminar, we will introduce how using barcodes can change: - Drawing management and search - Confirmation and cross-checking tasks - Information collaboration with the field This content is recommended not only for existing users but also for those considering improving the efficiency of drawing operations and reducing errors.