"2024 Cleaning Comprehensive Exhibition" Exhibition Participation Information

We propose alternatives to hydrofluoroether (HFE), which is scheduled to cease production in 2025!

Are you having trouble with hydrofluoroether (HFE) that will be discontinued in 2025? As an alternative, we propose the "HFE-7000 series" from Kaneko Chemical! 【Features】 ◆ Excellent environmental performance among fluorinated liquids (ODP=0 / low GWP) ◆ Outstanding safety during use (no flash point, low toxicity, high permissible concentration) ◆ Cleaning performance utilizing low viscosity / low surface tension / low evaporation latent heat ◆ Applicable to a wide range of materials ◆ Excellent thermal conductivity with minimal viscosity change at low temperatures and low melting point ◆ Thermally and chemically stable 【Main Applications】 ◆ Cleaning agents ◆ Water removal / finishing drying ◆ Thinners ◆ Dispersion media ◆ Solvents ◆ Refrigerants 【Product Lineup】 ◆ HFE-7100 (Component: HFE) ◆ HFE-7200 (Component: HFE) ◆ HFE-7300 (Component: HFE) ◆ HFE-71DE (Component: HFE + t-DCE) ◆ HFE-72DE (Component: HFE + t-DCE) ◆ HFE-73DE (Component: HFE + t-DCE)

• Other electronic parts
• Weight related measuring instruments
• Insulation Tester

Fluorine-based cleaning agents that do not contain HFC! Not subject to various regulations! Minimal damage to PC and ABS resins, achieving strong dissolving power and cleaning ability against oils!

"Nexia S-63" is a fluorine-based cleaning agent suitable for degreasing and cleaning. It can be used for hand wiping cleaning of steel plates, molds, rolls, etc., that have mineral oil-based processing oils attached, as well as for immersion cleaning of metal processing parts. Compared to other fluorine-based cleaning agents, it offers excellent cost performance. As it does not contain HFCs, it is an environmentally friendly cleaning agent. Main features of "Nexia S-63": 1) Easy to handle due to fewer regulatory restrictions as it does not contain HFCs or bromine. 2) Ozone depletion potential (ODP) is close to 0, and the global warming potential (GWP) is low. 3) Superior cost performance compared to other fluorine-based cleaning agents. 4) Non-flammable (not subject to fire service law). 5) Not subject to the following regulations: a. Fire Service Law b. Specific Chemical Substances Hazard Prevention Regulations c. Organic Solvent Poisoning Prevention Regulations d. PRTR Law e. Revised Ozone Layer Protection Law f. Law for the Promotion of Measures Against Global Warming g. REACH, RoHS2 Main applications: 1) Hand wiping cleaning of mineral oil-based processing oils. 2) Hand wiping cleaning of molds, rolls, etc. 3) Hand wiping cleaning of silicone oil. 4) Immersion cleaning of metal processing parts. For product details, please refer to the materials. Feel free to contact us for inquiries.

• Cleaning agents
• Other cleaning agents

Fluorine-based cleaning and degreasing agents that do not contain HFCs! Not subject to various regulations! Due to excellent drying properties, natural drying is possible after rinsing or hand wiping!

"Nexia S-19" is a fluorine-based cleaning agent suitable for degreasing and cleaning. It is also suitable for cleaning uncured polyurethane resins and demonstrates excellent effectiveness for nozzle cleaning. It has excellent drying properties, enabling one-component cleaning through natural drying after washing and wiping. As a fluorine-based cleaning agent that does not contain HFCs, it is environmentally friendly. ● Main Features of "Nexia S-19" 1) Easy to handle due to fewer regulatory restrictions as it does not contain HFCs or bromine. 2) Ozone Depletion Potential (ODP) is nearly 0, and Global Warming Potential (GWP) is low. 3) Allows one-component cleaning through natural drying after washing. 4) Non-flammable (not subject to fire service law). 5) Not subject to the following regulations: a. Fire Service Law b. Specific Chemical Substance Hazard Prevention Regulations c. Organic Solvent Poisoning Prevention Regulations d. PRTR Law e. Revised Ozone Layer Protection Law f. Law on Promotion of Measures against Global Warming g. REACH, RoHS2 【Main Applications】 1) Cleaning of mineral oil-based cutting oils 2) Hand wiping cleaning of molds, rolls, etc. 3) Cleaning of uncured polyurethane resins and nozzle cleaning ★ For product details, please refer to the materials. Feel free to contact us for inquiries.

• Cleaning agents
• Other cleaning agents

It is possible to perform "degreasing cleaning" and "silicone oil cleaning" without damaging resins with low chemical resistance, such as polycarbonate and ABS! Not subject to the Fire Service Act!

【Main Features】 - It enables "degreasing cleaning" and "silicone oil cleaning" without damaging resins with low chemical resistance, such as polycarbonate (PC) and ABS. - Being a pseudo-azeotropic composition, it can be used with existing equipment for chlorine-based, bromine-based, and fluorine-based cleaning agents, and it allows for distillation regeneration. - It is not subject to the Organic Chemicals Control Law, the Specific Chemical Substances Control Law, the Fire Service Act, or the PRTR Law. - It has a lower specific gravity than "HCFC-225," providing more volume at the same weight, making it cost-effective. - It can also be used as a substitute for "HFC-365" products. ★ For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

• Chemicals
• Cleaning agents
• Other consumables

As an alternative to trichloroethylene and methylene chloride! Usable as a degreasing cleaner! Non-flammable (not subject to fire service law)! Easy-to-handle concentration management values! Usable with existing equipment!

The "e Clean 21 HFE-401" is a fluorinated cleaning agent suitable for degreasing cleaning. It is a new type of product that achieves high cleaning power without using brominated solvents. It has no flash point and can be used as a substitute for trichloroethylene, methylene chloride, and brominated solvents, and it is also compatible with existing equipment. ● Main features of "e Clean 21 HFE-401": 1) Ozone depletion potential (ODP) is zero 2) Global warming potential (GWP) is also low 3) High cleaning power (KB value is approximately 100) 4) Non-flammable (not subject to fire service law) 5) Not subject to major international regulations: a. REACH b. GADSL c. IEC62474 d. Montreal Protocol Kigali Amendment, RoHS2, etc. 6) Can be used as a degreasing cleaning agent for mineral oils, → Existing equipment and devices using chlorine and bromine are also usable! <Main information regarding GHS classification and others> No relevant information on carcinogenicity or reproductive toxicity Occupational exposure limit concentration: 150 ppm Classified as a Type 1 organic solvent (under the Organic Solvents Regulation), Subject to the Water Pollution Control Act and the Soil Contamination Countermeasures Act. ★ For product details, please refer to the materials. Feel free to contact us with any inquiries.

• Chemicals
• Cleaning agents
• detergent

Proven results at automotive maintenance shops! Hand wiping cleaning, spray washing, and distillation regeneration possible with a co-boiling type. Not subject to organic regulations! Not subject to fire laws! Great cost performance!

The "Nexia A-6" is a cleaning agent that has become a trend in the recent automotive industry, focusing on environmental considerations, leading to increased inquiries from automotive maintenance shops. It also demonstrates excellent effectiveness in cleaning uncured resins. Particularly, it is not subject to various regulations, including the Fire Service Act, the Organic Solvent Regulation, the Specific Chemical Substances Hazard Prevention Regulation, the PRTR Law, and the Kigali Amendment, making it an environmentally friendly fluorine-based cleaning agent that is also recyclable. 【Main Features】 (1) It offers excellent cost performance compared to other HFO-based cleaning agents! (2) Existing cleaning equipment used with "HCFC-225" can be utilized! (3) Distillation regeneration is possible! (4) There are few regulatory restrictions! - Not subject to the Organic Solvent Prevention Regulation - Not subject to the Specific Chemical Substances Hazard Prevention Regulation - Not subject to the Fire Service Act - Not subject to the PRTR Law - Not subject to the Kigali Amendment 【Main Applications】 (1) Cleaning of uncured resins (2) Metal degreasing cleaning (3) Cleaning and dilution of silicone oils! (4) As a substitute for "HCFC-225"! (5) Hand cleaning of oily stains! ★ For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

• Chemicals
• Cleaning agents
• Other consumables

Can be used directly with existing "HFC-365mfc" equipment! Fluorine-based cleaning agents and steam drying that do not contain "HFC"!

The fluorine-based cleaning agent "eClean 21 HFE-100," which does not contain HFCs, can be used directly with existing "HFC-365mfc" equipment. Main Features: 1) Does not contain HFCs, bromine, or chlorine-based solvents 2) Comparable drying performance to HFCs 3) Can be used directly with existing "HFC-365mfc" equipment 4) Not subject to the Fire Service Act! Not subject to the PRTR Act! Not subject to the Organic Solvents Act! Not subject to the Poisonous and Deleterious Substances Control Act 5) Not subject to "Article 57-3 of the Industrial Safety and Health Act regarding the implementation of risk assessments" ★ For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

• Chemicals
• Cleaning agents
• Other consumables

Can be used with existing equipment for azeotropic types of chlorine, bromine, and fluorine! Distillation regeneration is also possible, and it excels in flux cleaning! Not subject to organic regulations or fire laws!

"Nexia A-2B" is a new fluorine-based cleaning agent of the pseudo-azeotropic type, compatible with existing chlorine-based, bromine-based, and fluorine-based equipment. It demonstrates particularly excellent performance in flux cleaning. Furthermore, it has fewer regulatory restrictions, as it is not subject to the Fire Service Act, the Organic Solvents Control Act, the Specific Chemical Substances Hazard Prevention Act, or the PRTR Act, making it an environmentally friendly fluorine-based cleaning agent that is also recyclable. *The "Nexia A-2" for immersion cleaning is also available in the lineup. 【Main Features】 (1) Superior in flux cleaning compared to other HFO-based cleaning agents! (2) Existing cleaning equipment that used "HCFC-225" can be utilized! (3) Distillation regeneration is possible! (4) Fewer regulatory restrictions! - Not subject to the Organic Solvents Control Act - Not subject to the Specific Chemical Substances Hazard Prevention Act - Not subject to the Fire Service Act - Not subject to the PRTR Act - Not subject to the Poisonous and Deleterious Substances Control Act 【Main Applications】 (1) Flux cleaning (2) Metal degreasing cleaning (3) Cleaning of silicone oil or as a diluent! (4) As a substitute for "HCFC-225"! ★For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

• Chemicals
• Cleaning agents
• Other consumables

Ozone depletion potential and global warming potential are extremely close to zero, making it an environmentally friendly cleaning agent! Recyclable! Not subject to the Fire Service Act! Not subject to the Organic Chemicals Regulation!

The odorless cleaning agent "e Clean 21N" has cleaning power and drying properties equivalent to trichloroethylene and methylene chloride, and is an easy-to-handle cleaning agent with no flash point. It does not contain chlorine-based solvents or solvents that fall under the organic solvent prevention regulations, and has an ozone depletion potential and global warming potential that are extremely close to zero, making it an environmentally friendly product. It can be used with cleaning equipment for trichloroethylene and methylene chloride, and by installing a recycling recovery system (distillation regeneration system), it reduces costs and environmental impact.

• Chemicals
• Cleaning agents

The complex shape modeling, integrated modeling, lattice/honeycomb structure modeling, porous structure modeling, hybrid structure modeling, direct modeling from 3D data, as well as topology optimization and collaboration with generative design, which were difficult with conventional processing methods and technologies, can lead to the creation of innovative aluminum parts that are not available from traditional or other companies. This includes rapid development, prototyping, and modeling of parts, dramatic reductions in the number of parts, lightweight and compact designs, and significant reductions in manufacturing time, costs, processes, and workforce. In this seminar, pioneering users such as J·3D, ODEC, and the pioneers of white copper, who are utilizing metal 3D printers to rapidly develop, prototype, and manufacture complex aluminum parts, will specifically explain the points and precautions for introduction and utilization, various modeling methods and technologies, next-generation AM technologies developed independently, and groundbreaking modeling examples that significantly differentiate from other companies, sharing both success and failure stories. With the remarkable advancements in metal AM technology, the use of metal 3D printers for aluminum part modeling and manufacturing will become commonplace in a few years. The secrets to success will be discussed by instructors with numerous research achievements and extensive modeling experience, providing clear and concrete lectures for those considering implementation, beginners with interest, and those who have recently started working in this field.

Metal 3D printers are becoming increasingly diverse, with relatively affordable low-cost machines available for several tens of millions of yen, as well as binder jetting methods that enable mass production of parts. High-speed, large machines for creating large parts and products are being continuously introduced to the market, and the production of magnesium parts, which are difficult to manufacture with existing machines, as well as copper parts, has also begun. Metal 3D printers eliminate the need for molds by directly producing products from 3D data. They can create complex shapes that are impossible with traditional processing methods, as well as lattice and porous structures, and hybrid structures. This enables the creation of innovative metal parts and molds that are not available from traditional or other companies, significantly shortens prototyping and manufacturing times, drastically reduces the number of parts, allows for lightweight and compact designs, and reduces manufacturing processes and workforce numbers. Using metal 3D printers, we will provide an easy-to-understand explanation for those considering or interested in developing attractive new products and markets, creating new businesses, differentiating from traditional and competitor products, significantly shortening prototyping and manufacturing times, dramatically reducing the number of parts, and achieving low-cost and lightweight complex-shaped components. The world is energetically investing in metal parts and mold manufacturing as the next generation's mainstay, and mass production of parts has also begun in earnest. Manufacturing parts with metal 3D printers will become commonplace in a few years.

At the beginning of the seminar, the National Institute of Advanced Industrial Science and Technology will discuss the research and development related to ceramics 3D additive manufacturing that they have been working on, focusing on the 3D additive manufacturing process, powder preparation process for molding, debinding and sintering processes, as well as examples of production using ceramics 3D additive manufacturing, particularly with alumina and reaction-sintered silicon carbide. Following that, instructors from Shin-Toh V-Ceramics and As One, who are at the forefront of this field in Japan, will provide an easy-to-understand explanation for beginners about the development trends of various ceramics 3D printers from world-class companies like 3DCeram Sinto and Lithoz, as well as the latest additive manufacturing technologies that enable the creation of innovative parts, rapid part development, prototyping, and manufacturing, significant reductions in the number of parts, lightweight and compact designs, and reductions in manufacturing processes and workforce through complex shapes and integral molding, hollow and porous structures, and lattice structures that are impossible with conventional processing methods. Finally, Canon will introduce the latest trends in their newly developed high-performance ceramics materials that excel in selective laser melting (SLM) for 3D printers, which significantly reduce "shrinkage" during sintering, along with the characteristics of parts that can be produced using this method, additive manufacturing technology, target fields, and contract manufacturing services.

Nagoya Chemical Industry Co., Ltd. will be exhibiting polyimide resins at the booth of Matsuo Sangyo Co., Ltd. during the 'Chemical Material Japan 2025' event held at Tokyo Big Sight. We also plan to showcase our developed products, including soluble polyimide, transparent polyimide, and porous polyimide, so we look forward to seeing you there.

In promoting DX and business reform projects, are your initiatives becoming "system construction first"? While you may have envisioned an ideal, it may not lead to "practical reforms" rooted in the field. For those facing such challenges, this seminar will provide hints for solutions. In this seminar, we will clearly explain the specific approach from "visualizing business processes" to "IT strategy (systemization strategy)" in business reform projects, incorporating case studies and practical steps. We will also introduce the essence of our "business process-focused, supportive consulting." Additionally, details on writing business flows, creating RFPs, and formulating systemization roadmaps will be covered in a separate seminar.