[Data] Visualizing power with existing equipment | PLC × PAL series sensors |

An easy-to-use, space-saving IoT sensor (60A) with built-in communication functionality that can measure AC current for each circuit, compatible with Modbus RTU communication.

"PAL-Plus" is an IoT sensor with built-in communication capabilities that can measure AC currents up to 60A. 【Three Key Points】 1. By adopting the Modbus RTU communication protocol, it offers excellent versatility and can be easily integrated into existing equipment. 2. As a split clamp-type sensor, it can be safely and easily installed on existing equipment without stopping its operation. 3. The integration of communication functionality within the sensor enables ultra-compact design, allowing for easy installation even when there are many measurement points. By combining the "PAL-Plus Unit," which has a signal conversion function that converts the sensor's signal to Modbus RTU and a power supply function for the sensor, it becomes possible to build a more space-efficient and cost-effective system! For more details, please download the materials or feel free to contact us. We also have rental units available. | If you are looking for a high-capacity sensor over 60A, please refer to the product page for the "PAL-Plus High Capacity Version." |

• Ammeter
• Power Monitoring Equipment
• Demand Monitoring

IoT sensor with built-in communication function that supports Modbus RTU communication, easy to use, space-saving, and capable of measuring AC current for each circuit (125~630A).

The "PAL-Plus Large Capacity" is a large-capacity IoT sensor with built-in communication functions that can measure alternating current. We offer four sensors that support rated currents of 125A, 250A, 400A, and 630A. 【Three Key Points】 1. By adopting the Modbus RTU communication protocol, it boasts excellent versatility and can be easily integrated into existing equipment. 2. As a split clamp-type sensor, it can be safely and easily installed on existing equipment without stopping its operation. 3. By incorporating the communication function within the sensor, we have achieved ultra-compact design, allowing for easy installation even when there are many measurement points. By combining it with the "PAL-Plus Unit," a gateway that has a signal conversion function to convert the sensor's signal to Modbus TCP and a power supply function for the sensor, it enables the construction of a more space-saving and cost-effective system! For more details, please download the materials or feel free to contact us. We also have rental units available. | If you are looking for small to medium capacity sensors up to 60A, please refer to the "PAL-Plus" product page |

• Ammeter
• Power Monitoring Equipment
• Demand Monitoring

You can safely and easily install sensors using the "retrofit clamp-type sensor" without stopping the equipment currently in operation.

We will introduce the installation method for the IoT sensors "PAL-Plus" and "PAL-Plus Large Capacity Version," which are easy to use, space-saving, and capable of measuring alternating current with built-in communication functions using Modbus RTU communication! 【Installation Method】 1. Clamp the sensor onto the wire where you want to measure the alternating current. 2. Securely fasten the wire and sensor together with a cable tie. 3. Completed. *Please be careful when working with live electricity, as there is a risk of electric shock.

• Ammeter
• Power Monitoring Equipment
• Demand Monitoring

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.