We will be exhibiting at the 17th International Secondary Battery Expo in Japan【Autumn】!

Improvement of particle residue during application, prevention of clumping, and effective for viscous powder/liquid mixtures! Furthermore, it can be processed in an overwhelmingly shorter time than with a paddle mixer!

"Multi-Damatori <MDT>" has improved upon the conventional "Damatori." * "Damatori" is a mixing technology that solves issues related to materials that increase in viscosity, clump together, or foam during mixing and dissolution. Have you experienced any of the following symptoms with your current mixing equipment? ◎ Clumps remain even after stirring... ◎ Mixing and dissolution times do not decrease... ◎ Insufficient pre-treatment of CNT... ⇒ These issues can be improved with Multi-Damatori <MDT>! [Improvements from Damatori] ■ One pass through Multi-Damatori equals five passes ■ Flexible combinations of sizes ■ No accumulation of samples ■ Can be used with the existing Damatori (1/2) by simply replacing the contents * For more details, please refer to the PDF document or feel free to contact us.

• Other powder equipment
• Piping parts
• Other mixing and mixing equipment

By eliminating the rotating part, it allows for stirring and mixing without creating bubbles! It also contributes to reducing processing time.

The "Damatri System" is a mixing device that solves the problems of mixing and dissolving materials that increase in viscosity or become lumpy, as well as preventing foaming. Since there are no rotating parts, it provides stirring power equivalent to a homomixer while allowing for mixing without creating foam. It can quickly disperse materials such as food fibers that are difficult to blend with water, and it achieves a reduction in stirring time that was previously challenging. 【Features】 ■ Forcibly generates shear without short paths ■ Can handle viscosities around 2000 mPa·s ■ No rotating system, making it less likely to create foam during processing ■ Improves processing uniformity ■ Reduces processing time *For more details, please refer to the PDF document or feel free to contact us.

• Other powder equipment
• Other mixing and mixing equipment

Examples of CNT dispersion and changes in viscosity and resistance values using NanoVate are presented.

This document explains the dispersion of CNTs using the ultra-high pressure wet-type micronization device "NanoVator" with the help of graphs. When using this product for CNT dispersion processing, a phenomenon is observed where the viscosity initially increases and then decreases. Long, thin CNTs become swollen during the process of bundle dispersion, leading to an increase in viscosity, and as the bundles disperse, the viscosity decreases. Viscosity changes can be considered as one indicator for confirming the dispersion state. [Contents] ■ Dispersion of CNTs and viscosity changes ■ CNT dispersion and resistance value changes using NanoVator *For more details, please refer to the PDF document or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer

Pre-dispersion is possible! Mixing through shock and turbulence obtained by passing through the complex flow paths inside the element.

"Multi-Damatori" is a product that contributes to the uniform mixing of powders and liquids. Carbon nanotubes were added to water and treated separately with this product and our "propeller mixer" for 30 minutes each. The treatment with this product resulted in the uniform dispersion of the agglomerated carbon nanotubes. This product is effective for pre-mixing powders and liquids that tend to leave clumps and increase viscosity. It is effective not only for carbon nanotubes but also for the pre-dispersion of various materials. Please verify its effectiveness through experiments or rentals.

• Mixer/agitator

We will be exhibiting at "Mechatrotech (or Monozukuri World)" held at Port Messe Nagoya (Nagoya International Exhibition Hall). During the event, we will showcase various products. We invite all related parties to come and visit us. 【Suppliers】 - Pferd - DC Swiss - Ensitec - Erichsen (Sheet metal) - EPK (if space allows) - Pipetite (if space allows)

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

Our company will be exhibiting at the "14th Fukushima Renewable Energy Industry Fair (REIF Fukushima 2025)" held at Big Palette Fukushima from Thursday, October 16, 2025, to Friday, October 17, 2025. Focusing on energy visualization solutions that can be started "immediately," we will introduce power monitoring solutions for each equipment and load through examples of the overall system configuration. 【Main Exhibited Products】 - Gateway BOX We will showcase the "Gateway BOX," a product that packages the necessary equipment for easy adoption of the visualization system. - PAL-Plus type E2 (Scheduled for release soon) We will introduce a "smart" clamp CT that can easily measure power for three-phase three-wire and single-phase three-wire systems (scheduled for release soon). - CEW-M4 / PAL-Plus As a monitoring system that can display power consumption and remaining power capacity, we will present the manager software "CEW-M4," which supports up to 20,000 points, and the Modbus-compatible AC current sensor "PAL-Plus." We sincerely look forward to your visit.

Toyo Machinery Co., Ltd. will be exhibiting at the high-performance film exhibition held at Makuhari Messe. The High-Performance Film Exhibition - FILMTECH JAPAN - is a specialized exhibition where molding processing technologies, materials, and functional films themselves are showcased all in one place. Experts from various fields, including the technology departments of film manufacturers, electronics, automotive, batteries, construction and building materials, and food and beverages, will attend in search of functional films. At Toyo Machinery, we will display actual machines for waviness correction and wrinkle removal while running film, allowing you to see their effects and functions. We will also introduce the quality management system (weight, thickness, moisture, etc.) from the German company Marlo. ↓↓↓Toyo Machinery's exhibitor information↓↓↓ https://www.material-expo.jp/tokyo/ja-jp/search/2025/directory/details.org-a11cd7f5-2a7b-4ea7-85ce-cde885acd2dd.html#/ *If you wish to attend, you can pre-register via the "Details & Application" link below. We sincerely look forward to your visit.

We will be exhibiting at the Okayama Technology Exhibition (OTEX) 2025, which will be held at Convex Okayama from November 12 (Wednesday) to November 13 (Thursday), 2025. We will showcase our eco-board pallets (paper pallets) as well as comprehensive packaging solutions suitable for one-way shipments such as exports. Our products will assist in addressing challenges related to environmental considerations in the context of the SDGs and the promotion of white logistics. ■ Our booth: 46 (Company products) We sincerely look forward to your visit, and we hope you can come together.