"Crystalization Rate Measurement Device" ~ Clearly capturing the crystallization process of resin materials ~ The product page has been published!

Automatic and easy measurement of crystallization rate of resin materials / Polymer crystallization by temperature jump / Visualization with images and graphs / Compact design

The crystallization rate measurement device from Mikyo Manufacturing Co., Ltd. is designed to melt film-like resin materials and measure the rate at which they crystallize. By continuously quantifying the crystallization process through image processing, it automatically and accurately measures the crystallization rate of polymers. ◆ Polymer Crystallization via Temperature Jump ◆ A film-like sample is sandwiched between glass covers and set in a sample holder. Once the heating furnace reaches the melting temperature, the sample holder is inserted. The fully melted film automatically drops into an oil bath, achieving a temperature jump through quenching. This device realizes a temperature jump during quenching in an oil bath for the melted film under conditions that cannot be replicated by conventional thermal analysis equipment. Polarizing microscopes for measurement and reference capture the crystallization process. The screen can display a scale bar, allowing for real-time measurement of spherulite size. ◆ Key Points ◆ - Automatic measurement with just temperature and time settings - Clear visualization of dark crystallization behavior - User-friendly and compact design For more details, please refer to the catalog or contact us.

• Testing Equipment and Devices

"YONEKURA: Supporting Curiosity and Creativity" - Yonekura Manufacturing Co., Ltd. responds to all challenges with a "comprehensive production system" from development to manufacturing and support.

**Main Products and Services** 〇 IR Imaging Furnace 　→ Real-time observation of behavior at high temperatures 　　・ High-temperature tensile observation device CATY-T3H 　　・ Compact high-temperature observation device TPS 　　・ Ultra-high-temperature observation device 18SP 〇 Material Testing Machines 　→ Apply loads to materials and products for measurement and analyze the results 　　・ Instrumented Charpy testing machine 　　・ Thrust friction and wear testing machine 〇 Custom Testing Machines 　→ Manufacture original devices that meet unique specifications 〇 System and Software Development 　→ Contribute to human error prevention and work efficiency improvement 〇 Minimal Fab 　→ Participate in a semiconductor manufacturing model for small-lot production in a cleanroom-less environment For more details, please contact us. We are happy to consult from a researcher's perspective.

• Testing Equipment and Devices
• Impact Test

Friction, Wear, Lubrication: Solving Tribology Challenges! Compliance with Standard Tests / Reproduction of Operating Environments / Performance Quality Evaluation

At Yokoyama Manufacturing, we handle products that conduct various tribology tests. The evaluation of tribology requires assessments under new materials and actual usage conditions, and the specifications for testing machines are becoming increasingly specialized. Utilizing our experience based on past custom achievements, we realize cutting-edge evaluation and testing environments. ■ Tribology Testing Machines for Material Evaluation These testing machines measure important parameters such as the coefficient of friction and wear amount for sliding and rotating components. They comply with standard tests specified by JIS, ISO, and others. We also offer various options for testing environments, such as oil baths and heating. ■ Tribology Testing Machines for Product Evaluation Tribological evaluations of sliding and rotating components like bearings and bushes require tests under conditions that closely resemble real environments. We provide testing machines that conduct tests under conditions that closely replicate the product's usage environment. ■ Tribology Testing Machines for Lubricating Oil Evaluation Tribological evaluation is essential for assessing the performance and quality of lubricating oils. We also manufacture and sell various testing devices for the research and development of lubricants (oils and greases).

• Testing Equipment and Devices

Rapid heating at approximately 50°C/sec using focused light heating method, with the possibility of rapid cooling when the heating lamp is turned off. Compatible with various atmospheres.

The "IR Series" (IR Series) of focusing heating furnaces manufactured by Yokokura Seisakusho, used by various research institutions around the world, is an IR image furnace that utilizes near-infrared focusing heating. It features a clean environmental structure that allows for ultra-fast heating and cooling. The product lineup includes the "IR-HP (6 Parabolic Radiation)," which dramatically expands the temperature distribution area compared to conventional heating furnaces with rapid heating and cooling from six directions; the "IR-QP (4 Elliptical Shared Focusing)," which offers double the temperature distribution area and rapid heating compared to conventional heating furnaces with rapid heating and cooling from four directions; and the "IR-TP (2 Elliptical Shared)," which enables microscopic observation compared to conventional heating furnaces with rapid heating and cooling from two directions. 【Main Features】 - Clean, energy-efficient, high performance - Vacuum and gas replacement + observation - High-speed heating with low power (1500°C in 30 seconds with only 4kW) - Heater uses tungsten filament with a high heating temperature of 3400K - Watt density is 10 to 20 times higher than nichrome heaters - Real-time temperature control available - Compact size For more details, please contact us or refer to the catalog.

• Electric furnace

"Heating and Cooling Observation Device MHO-300-2" Just place it on your microscope! Compact and slim / Atmosphere control available.

Simply place it on the stage of your microscope or micro-scope to observe changes from -100°C to 300°C in real-time. In a hermetically sealed furnace, heating and cooling can be performed under various vacuum inert gas atmospheres. 【Points】 ▮ Flexible temperature control performance With the dedicated software "TeCSS," temperature programming and monitoring can be easily done (it can also be operated independently with the temperature controller). Additionally, it displays temperature, time, and scale, and allows for in-situ image capture and storage synchronized with actual temperature records using the dedicated video recording software "HiTOS." By adding a cooling mechanism, it can also accommodate -100°C. ▮ Compact and user-friendly design This heating and cooling stage is designed to be small and thin, making it easy to reproduce special conditions. In addition to observation applications under microscopes or micro-scopes, it can also be repurposed for analytical instruments such as laser microscopes, Raman spectroscopy, and micro-spectroscopy. ▮ Atmosphere control with vacuum chamber structure Due to its vacuum chamber structure, heating and cooling can be performed under vacuum inert gas atmospheres. It also allows for the exhaust of vapors such as degassed materials vaporized by heating, and a XY slideable specimen holder makes it easy to introduce and remove prepared samples.

• Analytical Equipment and Devices

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

We have launched a "Display Item Search Page" that allows you to search for unit houses currently on display at exhibition halls nationwide, which was made available on January 6, 2026. There are over 800 items listed on the website. You can filter by area, price range, size, purpose, product type, color, and more. You can also check exterior and interior photos, prices, facilities, and drawings/specifications online. If you're interested in a display item, you can directly inquire, make a reservation to visit, or consult via LINE. This is a convenient service that allows you to efficiently progress from comparison to detailed consideration. Please take a look!

A co-authored paper by Shin Otsuki from the Data Science Department and another author has been published in Oxford Open Materials Science. 【Paper Summary】 Title: The Exploration of Enhanced Methods in Data Science and Applications in Materials Science Authors: Raymond Wu, Shin Otsuki

"With high-precision dimming settings of 256/1000 gradations, you can achieve your desired results." The new 1-channel dedicated model LLBLM-A maximizes the performance of high-brightness LEDs. It offers high light stability through constant current control and flexibly accommodates a wide range of inspection and lighting applications with three types of interfaces: parallel, RS232C, and LAN. In addition to intuitive operation via the front panel, it supports high-precision dimming with 256/1000 gradations (256 gradations in parallel mode). The available emission colors are G (green) and B (blue). This new model balances stable light output with ease of use. For more details, please feel free to contact us.

Last month, we held a winter safety conference organized by our company. We have compiled the details and atmosphere of the day, as well as information on winter labor accidents, into a PDF. We would appreciate it if you could take a moment to read it.