Support for measurement, analysis, and problem-solving of sound insulation performance.

[Sample distribution ongoing!] Unique technology condensed into units, providing overwhelming construction efficiency and a comfortable living space.

Shardan supports comfortable living in collective housing such as condominiums and apartments from the floor up, thanks to its excellent sound insulation and thermal insulation properties. It accommodates a wide range of flooring materials, including solid flooring and SPC flooring, and mitigates impact noise transmitted from upper floors to lower floors. **Features of Shardan** ☆ Integrated sound insulation and thermal insulation unit With a low floor thickness of 40mm, it can secure a space that is "more than 100mm higher than the typical ceiling height." Sound insulation: Industry-first! Achieves floor sound insulation performance of "LL-45" with a thickness of only 40mm, obtaining ΔLL(II)-3S certification. Thermal insulation: Utilizes sound-absorbing insulation material that demonstrates thermal conductivity equivalent to "high-performance glass wool insulation 48K." Workability: Compared to dry double flooring, "construction time is reduced to less than 1/3," allowing for easy installation using specially designed fastening components. Safety: Provides "high impact absorption" equivalent to tatami mats, enhancing safety during falls. **Shardan Lineup** ◯ SPF400 / SPF400HS A multi-type that does not limit finishing materials. *SPF400HS is a high thermal insulation version of SPF400.* ◯ OY430 / OY430HS A low-construction type that does not require a base layer. *OY430HS is a high thermal insulation version of OY430.*

• Wood products

[Sample Distribution] Easy installation with sound insulation performance equivalent to LL-45 and insulation performance comparable to high-performance glass wool insulation material 48K! 40mm thick low-floor substrate material.

Product Name: Chardan SPF400 【Features】 ✔ Low height of 40mm! ✔ Integrated soundproofing and insulation unit ✔ Reduced construction time to less than 1/3 compared to dry double flooring! (In-house research) ✔ Achieved LL-45 with SPC flooring! A multi-type that does not limit the choice of top materials This is a floor soundproofing material laid under flooring with a thickness of 40mm. It has been certified for performance with SPC flooring, which is said to be thin and hard, making it difficult to ensure soundproofing performance. With Chardan SPF400, SPC flooring can be used not only in commercial facilities but also in multi-family housing and welfare facilities where soundproofing and insulation functionality is required. Since it is a form that fills the underfloor space with special sound-absorbing material, it provides both soundproofing performance and insulation effect in one package. SPF400 Thermal Conductivity: 0.040 [W/(m·K)] SPF400HS Thermal Conductivity: 0.033 [W/(m·K)] * SPF400HS is a high insulation version of SPF400. Its composition and basic performance (thickness/soundproofing/constructability/safety) are equivalent to SPF400. Using dedicated edge treatment materials and fastening components, we achieve innovative construction that reduces construction time and noise.

• Wood products

[Sample Giveaway!] Just 0.5mm. Simply sandwich it between drywall to enhance the soundproofing performance of your walls.

【Features】 ■ With a thickness of 0.5mm, it does not require significant design changes. ■ Improves the coincidence phenomenon around 2kHz by 5dB. ■ Lighter than soundproof sheets, reducing work burden. ■ Can reduce installation time by 70% compared to soundproof sheets. The wall vibration control tape utilizes Iida's unique "vibration control soundproofing technology" that does not rely on thickness or weight. It is mainly adopted in multi-family housing. For more details, please check the Iida Industry website at the link below. You can request and confirm the following items on the website: - Sample requests are welcome. Please feel free to contact us. - A series of installation videos showing how to apply it to gypsum boards. - The mechanism of vibration control soundproofing and soundproofing performance regarding partition walls. - Auditory confirmation of the effects on partition walls. For more details on vibration control soundproofing technology, please check the website below. https://kenzai-orotex.jp/technology/wallfloor.php The viewing items on the website include: - The mechanism of vibration control soundproofing. - Experimental videos confirming the effects of vibration control soundproofing, etc. If you are having trouble with the sound environment in your home, please consult Iida Industry.

• Other consumables

[Sample available now!] Make walls thinner. Easy installation by simply sticking and sandwiching it with gypsum board for noise reduction! Lightweight, reducing the burden on workers.

Iida's unique vibration-damping soundproofing technology, which does not rely on traditional "thick and heavy" soundproofing methods, creates a quiet and comfortable living space. Easily tackle noise issues with simple installation by just sticking and sandwiching it onto gypsum boards! Its lightweight nature also helps reduce the burden on workers. Iida Sangyo's vibration-damping material, 'Zetro NV-αII', is a 0.5mm thick wall vibration-damping tape that "converts vibrations into heat to block sound." By simply sticking it between double layers of gypsum board, the TLD-45 wall is upgraded to TLD-50. It improves the coincidence phenomenon around 2kHz by 5dB. [Features] - Easy installation by just sticking and sandwiching onto gypsum boards - Adhesive tape eliminates the need for glue - Reduces installation time by approximately 70% compared to our standard - Lightweight, reducing the burden on workers *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables

[Sample Presentation] Just lay it out; a one-piece unit that doesn't require disposal! Equivalent sound insulation to LL-45 and insulation performance comparable to high-performance glass wool insulation material 48K!

Product Name: Chardan OY430 【Features】 ✔ No need for disposal; low height of 43mm! ✔ Integrated soundproofing and insulation unit ✔ Easy installation by simply laying it down; installation time for 50m² is about 3 hours (according to our own research) ✔ High impact absorption performance equivalent to tatami mats This is a floor soundproofing material to be laid under flooring with a thickness of 43mm. Being a low-profile product, it fits well under window frames! Due to its structure, which fills the underfloor space with special sound-absorbing material, it provides both soundproofing and insulation effects simultaneously. OY430 Thermal Conductivity: 0.040 [W/(m·K)] OY430HS Thermal Conductivity: 0.033 [W/(m·K)] * OY430HS is a high insulation version of OY430. The composition and basic performance (thickness/soundproofing/installation safety) are equivalent to OY430. Using our uniquely designed "OY Joint," we achieved innovative construction that reduces installation time and noise. It features high impact absorption similar to tatami mats, enhancing safety during falls. It is also recommended for use in facilities for the elderly and kindergartens.

• Wood products

【Sample available!】 Direct floor soundproofing material with the performance of "L-45".

**Features** - 43mm low profile ensures ceiling height - Low profile allows for good fit under window frames - Reliable floor sound insulation performance (L-45 certified by a third-party organization) - Easy installation with no need for a subfloor, just lay it down - High shock absorption comparable to tatami (around G50) Please consider for hotels, condominiums, and apartments. For more details, please check the Iida Sangyo website via the link below. You can request and confirm the following items on the website: - Request for samples - Free download of product CAD data - View actual installation videos (installation time: approximately 3 hours for 50m²) Adoption examples * Photos of examples can be viewed on the Iida Sangyo website. - A commercial building wants to open a yoga studio with solid wood flooring, but sound insulation is necessary due to a tutoring school below. → Ensured sound insulation while maintaining ceiling height with a low profile of 43mm. No complaints from below. - A request was made to renovate from tatami/straight laid cushion flooring to hardwood flooring. → Achieved the same floor height of 55mm as tatami, accommodating barrier-free access by applying it to the original cushion flooring area.

• Other safety and hygiene products

【Sample available!】Just stick it on Galvalume steel sheets. The industry's thinnest at 0.55mm for roof noise reduction.

**Features** - The industry's thinnest!! A tape with a thickness of 0.55mm solves rain noise issues. - Reduces indoor and outdoor rain noise by 10dB. - Only needs to be applied to 30% of the roof material's width. - Stays flexible and adheres well even in winter conditions. - Easy to cut with scissors or a cutter. For more details, please check the link to the Iida Sangyo website below. You can request and confirm the following items on the website: - Sample requests are welcome. Please feel free to contact us. - View videos measuring rain noise at a rainfall rate of 100mm/h. - View installation videos. - Free download of technical materials (effects when applying drainage hardware, performance comparison with insulation boards, durability, etc.). Past adoption examples: - Insulation boards became unusable when stored outdoors due to rain. With this product, indoor storage is possible without taking up much space. - Soundproof sheets were too heavy and difficult to install, so I wanted something easier to work with. - Now I can propose a combination of Galvalume roofs with vibration-damping tape to clients concerned about rain noise.

• Other consumables

【Sample available!】Simply stick it to the underside of a metal roof to reduce rain noise. With about 30% coverage relative to the roof width, the effect is outstanding!

Product Name: Zetoro NV-αII 【Features】 ✓ Just apply 30% of the width of the roofing material! ✓ Reduces indoor and outdoor rain noise by 10dB ✓ Industry’s thinnest! Despite being only 0.55mm thick, it effectively addresses rain noise ✓ Can be applied without hardening even in winter conditions ✓ Easily cut with scissors or a cutter Metal roofs are excellent in durability, design, and workability, but their soundproofing performance is insufficient, so vibration-damping tape is used to solve rain noise issues. The vibration-damping tape applied to the metal roof converts the vibrational energy from falling raindrops into thermal energy, thereby suppressing the generation of rain noise. The roofs of residences with applied vibration-damping tape reduce noise not only indoors but also outdoors. Zetoro NV-αII, which reduces rain noise by applying just 30% of the roofing material's width, can be used in cover methods during new construction or renovation.

• Rubber

Prevention of flooring cracks and uplift: No need for waste plywood or calp.

【Features】 ■ Can be directly applied to slab substrates ■ No need for backing material on the underside of the flooring due to elastic adhesive ■ Moderate elasticity that follows the expansion and contraction of the flooring, preventing cracking and lifting ■ Easy to apply even in cold weather ■ Solvent-free type that is environmentally friendly ■ Excellent dismantling properties compared to conventional rigid polyurethane adhesives, making it ideal for floor replacement For more details, please check the Iida Sangyo website. https://kenzai-orotex.jp/product/ibbond.php You can confirm the following items on the website: - Comparison of construction methods and compositions using conventional rigid types and elastic adhesives. - Videos showing that unevenness can be adjusted by holding with a notched trowel. - Results demonstrating flooring lifting tested in our own laboratory. - Installation videos are available for viewing (installation time: approximately 3 square meters, 2 minutes and 38 seconds). - Videos comparing dismantling properties with rigid adhesives (approximately 50% reduction) are available for viewing. - Product catalogs and installation manuals are available for free download, so please make use of them.

• glue

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

SPACECOOL Co., Ltd. is pleased to announce that it will exhibit at the "Japan Pavilion" established by the Ministry of the Environment at the 30th Conference of the Parties to the United Nations Framework Convention on Climate Change (COP30), which will be held in Belém, Brazil, from November 10, 2025. "SPACECOOL" is a radiative cooling material that enables zero-energy cooling by dissipating heat into space. At our exhibition booth, we will showcase examples of its use not only in reducing air conditioning energy in buildings but also in heat mitigation measures (adaptation strategies) for tents and parasols. The Japan Pavilion aims to promote excellent technologies, products, and services that support global decarbonization and adaptation to climate change, and to achieve Japan's long-term climate change goal of "net zero by 2050." We believe that our participation plays an important role in this endeavor. Through this exhibition, we aim to accelerate our initiatives with local partners in regions severely affected by heat issues, such as the Middle East, including Saudi Arabia and the United Arab Emirates, as well as Southeast Asia, contributing to global decarbonization and climate change measures.

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from October 1 (Wednesday) to October 3 (Friday), 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies that solve issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wednesday) to October 3 (Friday), 2025, 10:00 AM to 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK