Launching on October 16! A simple shelf for metal masks (30-piece storage type in a cost-effective 0.5m²).

Only the necessary features! Simple rack for metal masks.

▶ This is a storage shelf for metal masks with a focus on simplicity and a frame. ▶ Dimensions of the target metal mask: 650×550×30 [mm] (customizable) ▶ Storage capacity: 15 pieces per shelf (30 pieces per unit) ▶ It is easy to manage as it can be organized on the shelf, and the sliding mechanism makes retrieval effortless. ▶ The sliding dividers compress the gaps that were necessary for inserting fingers. ▶ It is also possible to adjust to the size of the customer's metal masks. [Features] - Made of stainless steel, it is less likely to suffer from durability degradation over time due to rust.

• Printed Circuit Board
• Other mounting machines
• rack

Efficient storage with sliding dividers! You can easily take things out even while wearing gloves, as they slide out for easy access!

▶ This is a storage shelf for metal masks with a frame. ▶ It can store 52 metal masks, each measuring 650×550×30mm and weighing approximately 4kg. ▶ The slide mechanism makes retrieval easy! ▶ You can easily take them out even while wearing anti-static gloves, as you can pull and grasp them. ▶ The sliding dividers compress the gaps that were necessary for finger access, allowing for efficient storage. ▶ It is also possible to customize the size to fit your metal masks. ▶ We can also accept inquiries for custom dimensions and the number of masks stored per unit. [Features] - Made of stainless steel, it is less likely to suffer from durability degradation due to rust over time. - Moving and setting up is easy with casters and adjusters.

• Printed Circuit Board
• Other mounting machines
• cabinet

Compressed storage with sliding dividers! A sturdy storage shelf for metal masks!

▶ This is a storage shelf for metal masks with a frame. ▶ It can hold 52 metal masks, each assumed to be 30mm thick and weighing approximately 5kg. ▶ The sliding dividers compress the gaps that were necessary for finger access. ▶ The dimensions can also be customized to fit your metal masks. ▶ We can also accept inquiries for custom external dimensions and the number of masks stored per unit. [Features] - Made of stainless steel, it is less likely to suffer from durability degradation due to rust over time. - Moving and setting up is easy with casters and adjusters.

• Printed Circuit Board
• Other mounting machines
• rack

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

In battery manufacturing lines, if components containing copper are used, there is a possibility that metal powder may mix in, dissolve, ionize, and pass through the separator, causing a malfunction that connects the positive and negative electrodes. Such minute metal powders may not be detected during pre-shipment inspections, and even if they are found, they can lead to various issues, such as the need to increase inspection processes to detect them. Therefore, Fukuda has developed a copper-free (all stainless steel) air leak tester that can be safely used in the production lines of battery manufacturers and secondary battery manufacturing equipment manufacturers. For product specifications and details, please refer to the "Related Product Information" and "Related Catalogs" below.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!