"Tabletop-sized high-temperature tensile observation device" High-temperature tensile compression observation device "CATY-T3H" with high-temperature heating, tensile compression, in-situ observation, and atmosphere control also available.

Tests can be conducted while observing the condition of the material surface [using a dual-swing crosshead], keeping the sample position centered to capture any changes!

The "CATY-T3H SYSTEM" is a tabletop-sized high-temperature tensile observation device that allows for thermal fatigue testing while observing the state of the sample surface in real-time. It can be used with simple operations and supports high-temperature and high-speed heating. By adopting a dual-swing crosshead, it maintains the sample's position in the center even if the sample piece expands or contracts, thereby minimizing the displacement of the observation position. By combining with optional units, it can also accommodate tests such as bending observation. 【Features】 ■ Capable of high-temperature and high-speed heating up to 1500°C * However, this depends on the shape and thermal capacity of the sample. ■ Testing of not only metallic materials but also composite materials of surface-mounted components is possible. ■ Stress measurement, low-cycle fatigue testing, and creep testing can be conducted in gas flow or vacuum conditions. ■ Realization of combined testing for thermal fatigue under stress and real-time observation. * For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Strength Testing Equipment

High-resolution in-situ observation under environments up to 1800℃. For research and material development of ceramics, secondary batteries, etc.!

The representative heating observation IR imaging furnace from Mikyo Manufacturing has been equipped with a digital violet laser microscope. It enables clear microscopic observation in ultra-high temperature environments of up to 1800°C. Compared to conventional models, the resolution and brightness have improved by about two times*, allowing for observations with high magnification and high contrast. Please utilize it for research on the behavior of fine structures and material development under high temperatures in steel, non-ferrous metals, ceramics, secondary batteries, and more. *Compared to our conventional model "VL2000DX-SVF17SP" ◆ Key Points ◆ - High-resolution in-situ observation Obtaining high-resolution images under ultra-high temperatures - Realization of diverse observation conditions Rapid heating and rapid cooling up to 1800°C - Excellent operability and controllability High-speed image acquisition accurately linked to temperature By using the optional load mechanism module "SVF12FTC," observations can be conducted under stress loading (up to 5kN) at high temperatures. For more details, please contact us.

• Steel

In-situ observation of the ultra-high temperature world at high resolution! We have collected clear micro-observation images under ultra-high temperature conditions of up to 1800°C.

The "Ultra-High Temperature Laser Microscope System," equipped with a digital violet laser microscope, is a system that enables clear imaging and recording of in-situ observations during heating, representing the heating observation IR image furnace of Yokokura Seisakusho. The image collection showcases clear micro-observation images of metallic materials such as steel and non-ferrous metals under ultra-high temperature conditions of up to 1800°C. Videos are also available on Yokokura Seisakusho's official YouTube channel. You can view in-situ observation videos via the QR code in the catalog. We have included eight observation images, such as: ★ "Austenite Growth to Bainite Phase Transition" ☆ "Slag Crystal Liberation from Molten Metal" ★ "In-Situ Observation of High-Temperature Tensile Process" The "Ultra-High Temperature Laser Microscope System" is utilized for research on the microstructural behavior of materials such as steel, non-ferrous metals, ceramics, and secondary batteries under high-temperature conditions. *For more details, please contact us or download the catalog.

• Testing Equipment and Devices

"YONEKURA: Supporting Curiosity and Creativity" - Yonekura Manufacturing Co., Ltd. responds to all challenges with a "comprehensive production system" from development to manufacturing and support.

**Main Products and Services** 〇 IR Imaging Furnace 　→ Real-time observation of behavior at high temperatures 　　・ High-temperature tensile observation device CATY-T3H 　　・ Compact high-temperature observation device TPS 　　・ Ultra-high-temperature observation device 18SP 〇 Material Testing Machines 　→ Apply loads to materials and products for measurement and analyze the results 　　・ Instrumented Charpy testing machine 　　・ Thrust friction and wear testing machine 〇 Custom Testing Machines 　→ Manufacture original devices that meet unique specifications 〇 System and Software Development 　→ Contribute to human error prevention and work efficiency improvement 〇 Minimal Fab 　→ Participate in a semiconductor manufacturing model for small-lot production in a cleanroom-less environment For more details, please contact us. We are happy to consult from a researcher's perspective.

• Testing Equipment and Devices
• Impact Test

- For the measurement and evaluation of metallic materials - High-temperature atmosphere tensile testing machine CATY-T3V

The "High-Temperature Atmosphere Tensile Testing Machine CATY-T3V" is a hybrid testing machine that can perform tensile tests in a vacuum and inert gas atmosphere, featuring a representative high-temperature heating furnace (IR image furnace) from Yokokura Seisakusho. ◆ Key Points ◆ - Maximum temperature of 1500℃ and maximum load of 10kN Tensile observation under ultra-high temperatures - Vacuum chamber structure Compatible with various atmosphere gases - Easy operation and installation Time-saving experiments Please contact us for more details.

• Testing Equipment and Devices

"Heating and Cooling Observation Device MHO-300-2" Just place it on your microscope! Compact and slim / Atmosphere control available.

Simply place it on the stage of your microscope or micro-scope to observe changes from -100°C to 300°C in real-time. In a hermetically sealed furnace, heating and cooling can be performed under various vacuum inert gas atmospheres. 【Points】 ▮ Flexible temperature control performance With the dedicated software "TeCSS," temperature programming and monitoring can be easily done (it can also be operated independently with the temperature controller). Additionally, it displays temperature, time, and scale, and allows for in-situ image capture and storage synchronized with actual temperature records using the dedicated video recording software "HiTOS." By adding a cooling mechanism, it can also accommodate -100°C. ▮ Compact and user-friendly design This heating and cooling stage is designed to be small and thin, making it easy to reproduce special conditions. In addition to observation applications under microscopes or micro-scopes, it can also be repurposed for analytical instruments such as laser microscopes, Raman spectroscopy, and micro-spectroscopy. ▮ Atmosphere control with vacuum chamber structure Due to its vacuum chamber structure, heating and cooling can be performed under vacuum inert gas atmospheres. It also allows for the exhaust of vapors such as degassed materials vaporized by heating, and a XY slideable specimen holder makes it easy to introduce and remove prepared samples.

• Analytical Equipment and Devices

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Dubhe" series from OtO Photonics is a spectrometer developed for OCT (Optical Coherence Tomography) applications. It has a spectral range of 800 to 880 nm, a body size of 180 (L) x 120 (W) x 63 (H) mm, and a high resolution of 0.04 nm (with a slit width of 5 µm). There are two models available that support CMOS camera line rates of 80 kHz and 20 kHz. It achieves micrometer resolution and captures depths of a few millimeters. This spectrometer is ideal for integration into OCT devices. Please contact us if you would like to evaluate a demo unit.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.