Vacuum pump for automation technology

We can provide customization of various connection gas materials, fittings, motors, and more to help solve our customers' challenges.

- It can be used for the transfer of wet gases and condensate gases. - It can be restarted from a reduced pressure or positive pressure state without releasing to the atmosphere. - The brushless DC motor allows for flow rate adjustment via PWM control. - It can be used at ambient temperatures up to 50°C and gas temperatures up to 70°C. - Leak-tight design: 6 x 10^-3 mbar x l/s - A multi-voltage compatible AC converter specification is also available. Basic flow rate: 7 l/min and above Achievable vacuum level: < 100 mbar abs and above Maximum allowable discharge pressure: 2.5 bar (0.25 MPa)

• Other pumps

This is an ideal vacuum pump for steam sterilization autoclaves.

- Ideal vacuum pump for steam sterilization autoclaves - Suitable vacuum level for vacuum drying - Design specialized for the transfer of wet gases, steam, and condensed gases - Adoption of a new design with excellent cost performance - Multi-voltage AC motor Basic flow rate: 36 l/min ±10% (50Hz) / 39 l/min ±10% (60Hz) Achievable vacuum level: 35 mbar abs Maximum allowable discharge pressure: 0.5 bar

• Other pumps

Excellent vacuum performance and exhaust speed, low vibration and low noise, and our own brushless DC motor allow for digital customization based on the settings of each parameter.

- Achieves high vacuum with excellent exhaust speed - Robust design - Low vibration and low noise design N952KNDC-B Basic flow rate: 11 - 36 l/min Exhaust speed: 0.66 - 2.16 m³/h Achievable vacuum level: 1.5 mbar abs Maximum allowable discharge pressure: 1 bar (0.1 MPa) N952KTE-W Basic flow rate: 32 l/min Exhaust speed: 1.92 m³/h Achievable vacuum level: 2 mbar abs Maximum allowable discharge pressure: 1 bar (0.1 MPa) N952KT.29E-W Basic flow rate: 9 - 32 l/min Exhaust speed: 0.54 - 1.92 m³/h Achievable vacuum level: 2 mbar abs Maximum allowable discharge pressure: 1 bar (0.1 MPa)

• Other pumps

A vacuum pump with excellent pumping characteristics for wet gases, steam, and condensable gases, ideal for waste liquid and drainage processes in medical equipment.

It is a double head type (parallel connection) of the N936 type. - Excellent pump characteristics for wet gas, steam, and condensable gases - Adopts a new design with excellent cost performance - Multi-voltage AC motor Basic flow rate: 60 l/min ±10% (50Hz) / 66 l/min ±10% (60Hz) Achievable vacuum level: 200 mbar abs Maximum allowable discharge pressure: 0.5 bar

• Other pumps

A compact gas pump with a well-balanced combination of decompression characteristics and positive pressure characteristics.

- It can be used for the transfer of wet gas and condensate gas. - It can be restarted from a reduced pressure state or a positive pressure state without releasing to the atmosphere. - The brushless DC motor allows for flow rate adjustment via PWM control. - It can be used at ambient temperatures up to 50°C and gas temperatures up to 70°C. - Leak-tight design: 6 x 10^-3 mbar x l/s - A multi-voltage compatible AC converter specification is also available. Basic flow rate: 7 l/min and above Achievable vacuum level: < 100 mbar abs and above Maximum allowable discharge pressure: 2.5 bar (0.25 MPa)

• Other pumps

This is the replacement procedure for the consumable parts diaphragm and valve.

The maintenance procedures for other gas pumps are generally similar, so please refer to them.

• Other pumps

Explanation of the mechanism and features of the KNF diaphragm pump.

- Oil-free - Contamination-free - Maintenance-free - Corrosion resistance - Motor variation - Modular system - Pump customization (project pump)

• Other pumps

A vacuum pump with corrosion resistance, high durability, and strong resistance to water vapor and condensation.

- Can be used for the transport of wet gases and condensate gases. - Can be restarted from a reduced pressure state or a positive pressure state (brushless DC motor). - The brushless DC motor allows for flow adjustment via PWM control. Basic flow rate: 4.2 - 5 l/min ~ Achievable vacuum level: < 30 mbar abs ~ Maximum allowable discharge pressure: 0.1 - 0.3 bar (0.01 - 0.03 MPa)

• Other pumps
• Special Pump

Integrated pump and motor, downsized compared to conventional products, with improved durability. Evolution model of the NMP850 HP series.

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Well-balanced pressure reduction and pressurization characteristics - Variable flow rate (brushless motor) *Optional Basic flow rate: 7 l/min Achievable vacuum level: 220 mbar abs Maximum allowable discharge pressure: 2.2 bar

• Other pumps

Integrated pump and motor, downsized compared to conventional products, with improved durability. An evolved model of the long-selling NMP830 series.

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Well-balanced pressure reduction and pressurization characteristics - Variable flow rate (brushless motor) *Optional Basic flow rate: 5 l/min~ Achievable vacuum level: 230 mbar abs Maximum allowable discharge pressure: 3 bar (0.3 MPa)

• Other pumps

Integrated pump and motor, downsized compared to conventional products, with improved durability. Long-selling micro pump NMP830 series.

- Customization is possible according to technical challenges. - Maintenance-free, contamination-free - High pump performance despite compact design - Long lifespan design, high durability - Variable flow rate (brushless motor) *Optional - No restrictions on installation direction Basic flow rate: 2.5 l/min Achievable vacuum level: 250 mbar abs Maximum allowable discharge pressure: 1.4 bar

• Other pumps

Integration of pump and motor, downsizing compared to conventional products, and improved durability. The long-selling micro gas pump NMP850 series.

- Customization is possible according to technical challenges. - Maintenance-free, contamination-free - High pump performance with a compact design - Long lifespan design, high durability - Variable flow rate (brushless motor) *Optional - No restrictions on installation direction Basic flow rate: 4.2 l/min Achievable vacuum level: 230 mbar abs Maximum allowable discharge pressure: 2.5 bar

• Other pumps

This is the replacement procedure for the consumable parts diaphragm and valve. It can also serve as a reference for the maintenance procedures of other micropumps.

The maintenance procedures for the other gas pumps are generally similar, so please refer to them.

• Other pumps

Evolution model of the long-selling product NMP850 series.

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Change to FDA-certified materials (optional) - Well-balanced pressure reduction and pressurization characteristics - Serial connection double head <50 mbar abs (optional) - Increased flow rate with double head type - Improved vacuum level with double head type (optional) Basic flow rate: 3.9 - 4.5 l/min (varies by material and motor) Achievable vacuum level: 230 - 300 mbar abs (varies by material and motor) Maximum allowable discharge pressure: 2.1 - 2.5 bar (varies by material and motor)

• Other pumps

Evolution model of the long-selling product NMP830 series.

- Maintenance-free, contamination-free - Long lifespan design - Compact size/high output design, no restrictions on installation direction - Compatible with wet gas and condensate gas - Change to FDA-certified materials (optional) - Well-balanced pressure reduction and pressurization characteristics - Serial connection double head <50 mbar abs (optional) - Increased flow rate with double head type - Increased vacuum level with double head type (optional) Basic flow rate: 5 l/min~ Achievable vacuum level: 230 mbar abs Maximum allowable discharge pressure: 3 bar (0.3 MPa)

• Other pumps

Vacuum pumps with excellent pumping characteristics for wet gases, vapors, and condensable gases, ideal for waste liquid and drainage processes in medical devices.

Wet gases, steam, and condensable gases exhibit excellent pumping characteristics. Due to these characteristics, they are ideal for waste and drainage in medical devices. - Excellent pumping characteristics for wet gases, steam, and condensable gases - Adopts a new design with excellent cost performance - Multi-voltage AC motor Basic flow rate: 34 l/min ±10% (50Hz) / 35 l/min ±10% (60Hz) Achievable vacuum level: 200 mbar abs Maximum allowable discharge pressure: 0.5 bar

• Other pumps

Long-selling NMP850 series micro diaphragm gas pump

- Customization according to technical challenges is possible. - Maintenance-free, contamination-free. - High corrosion resistance due to a wide variety of gas contact materials. - High pump performance despite a compact design. - Long lifespan design, high durability. - Variable flow rate (brushless motor). - No restrictions on installation direction. Basic flow rate: Single head 3.5 - 4.5 l/min (varies by material and motor) Double head 6.0 - 8.0 l/min (varies by material and motor) Achievable vacuum level: 230 - 300 mbar abs (varies by material and motor) Maximum allowable discharge pressure: 2.1 - 2.5 bar (varies by material and motor)

• Other pumps

Long-selling NMP830 series micro diaphragm gas pump

- Customization according to technical challenges is possible. - Maintenance-free, contamination-free - High corrosion resistance due to a wide variety of gas contact materials - High pump performance despite compact design - Long lifespan design, high durability - Variable flow rate (brushless motor) - No restrictions on installation direction Basic flow rate: Single head 2.1 - 3.1 l/min (varies by material and motor) Achievable vacuum level: 250 - 350 mbar abs (varies by material and motor) Maximum allowable discharge pressure: 1.0 - 1.4 bar (varies by material and motor)

• Other pumps

Features: ● Equipped with ARM MediaTek Genio 700 / 510 ● Onboard LPDDR4 8GB ● HDMI 2.0 x 1, DP 1.4 x 1 ● eDP 2 lanes x 1, MIPI-DSI 4 lanes x 1 ● GbE x 1 ● USB 3.0 + 2.0 x 1, USB 2.0 x 5 ● UART x 4, GPIO x 12, MIPI CSI x 2, TPM 2.0 ● Fan-equipped heatsink, heatsink available separately ● Carrier board available separately

Features: ● Equipped with Intel Core Ultra 5 125H/7 155H ● LPDDR5 16GB onboard memory ● NVMe 128GB onboard storage ● eDP x 1, DDI x 1 ● USB 2.0 x 8, USB 3.2 Gen2 x 2 ● PCIe 4.0[x1] x 4 ● 2.5GbE x 1 ● COMe Type10 standard, size 84mm x 55mm ● Optional items ECB-920A-0001: Development carrier board NANOCOM-MTU-FAN: CPU fan NANOCOM-MTU-HSP: Heat spreader (Note: Heat dissipation is required in the enclosure)

Features: ● Equipped with Intel Core Ultra 9 185H / 7 155H / 5 125H processors ● DDR5 5600MHz Dual Channel SODIMM x2 (up to 96GB) (sold separately) ● VGA switch DDI x1, LVDS colay eDP x1, DDI x2 ● USB 2.0 x8, USB 3.2 Gen 2 x4 ● PCIe [x1] x4, PCIe [x4] x1, PEG [x8] + [x4] + [x4] ● 2.5GbE x1 ● DC 9~16V input ● COM Express Type 6, 3.75 inches x 3.75 inches (95mm x 95mm)

By digitizing contract operations, you can reduce many costs, including stamp duty and mailing fees. ◆ Four Benefits of Electronic Contracts - Cost reduction for printing, stamp duty, mailing fees, and original document storage - Improved business efficiency through system-based sending and stamping - Prevention of tampering with timestamps - Enhanced document searchability 【Many Benefits for the Other Party as Well!】 - Both parties can confirm that the document has not been tampered with - No worry about losing the original paper documents - Increased operational efficiency due to the absence of mailing and binding hassles - Quick contract conclusion through email or system verification ◆ Disadvantages of Electronic Contracts - Costs for implementing and operating the service - Need to ensure that business partners understand electronic transactions ----------------------------------------------------- 　　Consult with paperlogic for electronic contract services! -----------------------------------------------------

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!