Notice of Participation in 'Mechatrotech Japan 2025' from Wednesday, October 22 to Saturday, October 25, 2025

Collet holder for small MC and DC, used in conjunction with Colette Prustad!

We would like to introduce our "25T Collet Holder." This collet holder is designed for various applications, including drilling, reaming, end milling, and synchronized tapping, and is suitable for small MC and DC machines. It can accommodate a highly versatile 16° taper collet. Additionally, we can manufacture special holders upon request. Please feel free to contact us. 【Features】 ■ Collet holder for small MC and DC machines ■ Usable for various applications including drilling, reaming, end milling, and synchronized tapping ■ Compatible with a highly versatile 16° taper collet ■ Can be used in conjunction with collet pull studs ■ Special holders can also be manufactured *For more details, please download the PDF or feel free to contact us.

• Machining Center
• drill
• End Mills

Center-through high-pressure coolant compatible! Achieves stable high precision with no packing in the collet.

We would like to introduce our "AR/OH Coolant Collet." This is a liquid-tight collet (PAT) with a special slit design that allows for a gripping range of 0.1 to 0.5 while completely sealing high-pressure coolant. With no packing in the collet, it achieves stable high precision. Please feel free to contact us when you need assistance. 【Features】 ■ 16° Collet ■ Coolant Through ■ Pressure 20MPa *For more details, please download the PDF or feel free to contact us.

• Machining Center

Effective for semi-dry processing! We also produce oil-based coolant compatible with water-soluble coolants.

We would like to introduce the "AR/C Coolant Collet" that we handle. It is standardly compatible with high-pressure coolant. It can be completely sealed except for the coolant grooves even at high pressures of 20MPa. This collet features coolant grooves on the inner diameter of a liquid-tight collet with a special slit design, allowing for effective supply of cutting fluid towards the cutting edge. 【Features】 ■ Spraying cutting oil towards the cutting edge improves chip evacuation ■ Demonstrates effectiveness in deep hole machining of small diameters where oil-hold drills cannot be used ■ Standardly compatible with water-soluble coolant ■ Also compatible with oil-based coolant ■ Effective for semi-dry machining (mist) *For more details, please download the PDF or feel free to contact us.

• Machining Center

For synchro tap processing! A tap-specific collet with a square hole stop attached.

We would like to introduce the "AR/GB Tap Collet" that we handle. This is a tap-specific collet with a square hole stop. The square hole inside the collet prevents slipping during tap processing, ensuring reliable tap machining. Please feel free to contact us if you would like to place an order. 【Features】 ■ 16° Collet ■ Tap *For more details, please download the PDF or feel free to contact us.

• Machining Center

Coolant collet for synchro tap processing! It improves tool life.

We would like to introduce the "AR/GH Coolant Tap Collet" that we handle. The AR/GB tap collet (for synchronized tap processing) has been further refined into a liquid-tight design, making it suitable for high-pressure coolant with an oil hole tap collet chuck. This improves tool life and enables tapping of deep holes (long shank taps). 【Features】 ■ 16° collet ■ Coolant tap ■ Pressure 20MPa *For more details, please download the PDF or feel free to contact us.

• Machining Center

JIS B 4133 compatible with face milling! Widely usable from facing to rough machining.

We would like to introduce the "Type A Face Milling Arbor" that we handle. This arbor is compatible with JIS B 4133 face milling. It securely holds the milling cutter and can be widely used from facing to rough machining. Please feel free to contact us when you need assistance. 【Features】 ■ The cutter is compatible with JIS B 4113 carbide-tipped face mills. ■ Standard accessories include a drive key and cutter clamp bolt. *For more details, please download the PDF or feel free to contact us.

• Machining Center
• Milling

Sandvik T-MAX face mills, compatible with shoulder face mills!

We would like to introduce the "Type B Face Milling Arbor" that we handle. This arbor is compatible with Sandvik's T-MAX face mills and shoulder face mills. It securely holds the milling cutter and can be widely used for everything from facing to rough machining. 【Features】 ■ Compatible with Sandvik's T-MAX face mills and shoulder face mills ■ Securely holds the milling cutter, allowing for a wide range of applications from facing to rough machining *For more details, please download the PDF or feel free to contact us.

• Machining Center
• Milling

Supports processing with a rich variety of options! Standard accessories include cutter clamp nuts and collars.

We would like to introduce the "Side Cutter Arbor" that we handle. The cutters applicable are JIS B4206 side milling cutters, JIS B4107 carbide side milling cutters, JIS B4219 metal saws, and JIS B4109 carbide metal saws. Please use equivalent products. Additionally, the standard accessories include a cutter clamp nut and collars (H3: 3, 5, 7, 8, 10, 12mm each 1). 【Features】 ■ Supports processing with a rich variety of options ■ The cutters applicable are JIS B4206 side milling cutters, JIS B4107 carbide side milling cutters, JIS B4219 metal saws, and JIS B4109 carbide metal saws ■ Standard accessories include a cutter clamp nut and collars (H3: 3, 5, 7, 8, 10, 12mm each 1) *For more details, please download the PDF or feel free to contact us.

• Machining Center
• cutter

For mall step pad drills! Lineup includes BT30-MTA1-50/65 and others.

We would like to introduce our "Morse Taper Holder Type A." We offer a wide range of products, including BT50-MTA1-45/120/180 and BT40-MTA1-45/120. This holder is designed for use with Morse taper drills. Please feel free to contact us if you have any inquiries. 【Features】 ■ For Morse taper drills ■ Designed for use with Morse taper drills *For more details, please download the PDF or feel free to contact us.

• Machining Center
• drill

For converting mall taper sizes! Used in combination with the MTA type mall taper holder.

We would like to introduce the "MT. Drill Socket" that we handle. It is used in combination with the MTA type morse taper holder. It can convert the taper size of the morse taper shank. Please feel free to contact us when you need it. 【Features】 ■ For converting morse taper sizes ■ Made to order ■ Used in combination with the MTA type morse taper holder *For more details, please download the PDF or feel free to contact us.

• Machining Center
• drill
• Socket wrench

Easy drill chucking! Introducing a holder for attaching a drill chuck.

We would like to introduce the "Jacob Taper Holder" that we handle. This is a holder for attaching a drill chuck. It allows for easy chucking of straight drills. Please feel free to contact us when you need assistance. 【Features】 ■ Easy chucking of straight drills ■ Holder for attaching a drill chuck *For more details, please download the PDF or feel free to contact us.

• Machining Center
• drill
• Chuck

Introducing ALBRECHT products designed for use with Jacob's taper holders!

We would like to introduce the ALBRECHT brand "Drill Chuck" that we handle. This product is used by attaching it to a Jacob's taper holder. We offer three types, starting with the "100 - J2," which has a gripping range of 0.5 to 10.0 and an outer dimension of 43. Please feel free to contact us when you need assistance. 【Product Lineup】 ■100 - J2 ■130 - J6 ■160 - J6 *For more details, please download the PDF or feel free to contact us.

• Machining Center
• drill
• Chuck

Small MC and DC collet holder! Compatible with highly versatile 16° taper collets.

We would like to introduce our "15T-Collet Holder." This collet holder is suitable for various applications, including drilling, reaming, end milling, and synchronized tapping, and is designed for small MC and DC machines. It can accommodate a versatile 16° taper collet. Please feel free to contact us when you need assistance. 【Features】 ■ Collet holder for small MC and DC machines ■ Usable for various applications such as drilling, reaming, end milling, and synchronized tapping ■ Compatible with a highly versatile 16° taper collet *For more details, please download the PDF or feel free to contact us.

• Machining Center
• drill
• End Mills

Special holders are also manufactured! Used for various applications such as drilling, reaming, end milling, and synchronized tapping.

We would like to introduce the "S20T Collet Holder" that we handle. This collet holder is designed for small MC and DC machines and can use a highly versatile 16° tapered collet. It can be used for various applications, including drilling, reaming, end milling, and synchronized tapping. Additionally, it can be used in conjunction with collets and pull studs, so please request them together. 【Features】 ■ Collet holder for small MC and DC machines ■ Usable for various applications such as drilling, reaming, end milling, and synchronized tapping ■ Can use a highly versatile 16° tapered collet ■ Used in conjunction with collets and pull studs ■ Custom holders can also be manufactured *For more details, please download the PDF or feel free to contact us.

• Machining Center
• drill
• End Mills

Supporting processing with reliable performance! We also introduce custom-made products specifically for end mills.

We would like to introduce our "Side Lock Holder Type A/S". The general-purpose "Side Lock Holder Type A" supports machining with reliable performance. Additionally, the "Side Lock Holder Type S" is dedicated to end mills. Please use side lock end mills that are machined according to the ISO-3338 standard for flat cutting. 【Features】 <Side Lock Holder Type A> ■ General-purpose type ■ Supports machining with reliable performance <Side Lock Holder Type S> ■ Dedicated to end mills ■ Made to order *For more details, please download the PDF or feel free to contact us.

• Machining Center
• End Mills

Short nose with minimized protrusion length for use in chucking lathes, automatic lathes, etc.!

We would like to introduce the "Short Nose Collet Holder mm Specification" that we handle. This small and short holder is ideal for Swiss-type and comb blade NC lathes. It can be used with nice mills even in machines with narrow tooling zones. Since it is used in combination with AR collets, please order them together. 【Lineup (partial)】 ■SSH12-ECH5S-70 ■SSH16-ECH5S-70 ■SSH20-ECH7S-40 ■SSH22-ECH7MS-40 ■SSH25-ECH7S-62 *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The deterioration of blade table precision can be compensated with the holder! It is possible to adjust the height deviation within a range of ±0.3mm.

We would like to introduce our "Adjustable Center Height Collet Holder." It is compatible with coolant through and allows for adjustments to the misalignment of the center height between the lathe spindle and the tool post. This can help compensate for center misalignment due to tool wear, carbide drills, reamers, etc., thereby extending tool life. Additionally, we also offer an "Adjustable Center Collet Holder" that allows for adjustments to the misalignment between the chuck and the turret of the machine. 【Features】 ■ Adjusts center height misalignment within a range of ±0.3mm ■ Can extend tool life by compensating for center misalignment due to tool wear, carbide drills, reamers, etc. ■ Can compensate for degradation in tool post accuracy with the holder *For more details, please download the PDF or feel free to contact us.

• Other machine elements

Suitable for turret lathes and similar machines, a holder with a flat surface on the shank, ideal for NC lathe holders.

We would like to introduce the "Collet Holder with Flange" that we handle. This holder is suitable for NC lathe holders and features a flat shank. It is used in combination with collets, so please order them together. Additionally, we can manufacture special shank dimensions. 【Lineup (partial)】 ■SSH16-ECH7-32 ■SSH20-ECH7-45 ■SSH25-ECH7-62 ■SSH32-ECH13-80 ■SSH40-ECH20-80 *For more details, please download the PDF or feel free to contact us.

• Other machine elements

Compatible with 20MPa! A square hole has been machined at the rear of the AR collet for tap stop.

We would like to introduce the "AR Collet Coolant Tap Collet GH Type" that we handle. A square hole has been machined at the rear of the AR collet for tap rotation prevention. Additionally, if the machine used is equipped for synchronized threading, it is possible to attach the tap collet to the ECH type collet holder for tap processing. 【Features】 ■ Coolant through ■ Compatible with 20MPa *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We offer a wide range of tap collets from Alps Tool!

We would like to introduce the "AR Collet Tap Collet GB Type" that we handle. We offer a lineup of six types: AR16GB, AR20GB, AR25GB, AR32GB, AR40GB, and AR50GB. Please feel free to contact us when you need assistance. 【Lineup】 ■AR16GB ■AR20GB ■AR25GB ■AR32GB ■AR40GB ■AR50GB *For more details, please download the PDF or feel free to contact us.

• Other machine elements

It demonstrates its power in deep hole machining of small diameters where oil hole drills cannot be used!

We would like to introduce the "AR Collet Coolant Through Type C" that we handle. It is standardly compatible with high-pressure coolant. Even at a high pressure of 20MPa, it can completely seal off areas other than the coolant grooves. Additionally, it is standardly compatible with water-soluble coolants, and it can also accommodate oil-based coolants. Please feel free to contact us if you have any requests. 【Features】 ■ Coolant Through ■ Compatible with 20MPa ■ Compatibility Grades ・AA Grade 5μm ・A Grade 8μm *For more details, please download the PDF or feel free to contact us.

• Other machine elements

Liquid-tight collet! Complete sealing with a short slit that stops just before the tapered section.

We would like to introduce our "AR Collet with Coolant Through OH Type." This liquid-tight collet does not leak from the slits. It is compatible with AA grade 5μm and A grade 8μm, and can withstand up to 20MPa. Please feel free to contact us if you have any inquiries. 【Features】 ■ Coolant Through ■ Compatible with 20MPa ■ Compatibility Grades ・ AA grade 5μm ・ A grade 8μm *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We provide products with reliable technology, high precision, and excellent durability that receive high praise!

We would like to introduce the "AR Collet Standard Type" that we handle. It conforms to the standard 16° taper, DIN6499/ISO15448, which is commonly used in Europe and the United States. It is widely adopted by leading domestic lathe manufacturers. It is well-suited for Swiss-type NC lathes, rotary tools, and turning centers (multi-tasking machines) for rotary tools (M function). 【Features】 ■ Standard 16° taper, conforming to DIN6499/ISO15448, commonly used in Europe and the United States ■ Long-standing track record as a collet manufacturer ■ Provides reliable technology and high-precision, durable products that receive high evaluations ■ Standardly adopted by leading domestic lathe manufacturers *For more details, please download the PDF or feel free to contact us.

• Other machine elements

A series with a variety of products such as collet holders, AR collets, and nuts, tailored to meet your needs!

The "NICE MILL SERIES" from Alps Tool is a product that ensures compatibility with collet holders, AR collets, nuts, and other tooling, providing total support for machine tool tooling. It features a lineup that includes the standard 16° taper collet known as "AR (ER) collet," tool holders for CNC lathes suitable for small automatic lathes to medium and large machines, and nuts with bearings that are ideal for medium and large machines. Please feel free to contact us for inquiries. 【Features of AR (ER) Collets】 ■ A variety of sizes available ranging from φ0.3 to φ34 ■ Supply of collets with stable quality through the ISO9001 quality system ■ A wide range of options including standard, coolant-through, and tap collets ■ AAA grade 3μm, AA grade 5μm, A grade 8μm, meeting strict inspection standards *For more details, please download the PDF or feel free to contact us.

• Other machine elements
• nut

By allowing the axis to float, it absorbs screw pitch errors! Available in single and double options.

We would like to introduce our "Tap Holder with Axial Float." By allowing the axis to float, it absorbs screw pitch errors. We offer two types: single and double. Additionally, we have the NC lathe tap holder "Micro Float Tapper AES Type," which absorbs screw pitch errors by allowing the axis to expand and contract slightly, and the NC lathe tap holder "Radial Float Tapper ARF Type," which allows the axis to float in the radial direction. 【Product Lineup】 ■ Tap Holder with Axial Float - Single ■ Tap Holder with Axial Float - Double ■ Micro Float Tapper AES Type ■ Radial Float Tapper ARF Type *For more details, please download the PDF or feel free to contact us.

• Other machine elements

For automatic lathes and similar machines! Front and back processing can be utilized with a single tool.

We would like to introduce our "Short Nose Collet Holder Double-Ended Type." It is suitable for Swiss-type and small automatic lathes. It can be used for both front and back processing with a single tool. Additionally, it can accommodate outer diameter sizes in both metric and inch specifications. Please feel free to contact us if you have any requests. 【Lineup (partial)】 ■SSH20-ECH7WS-33 ■SSH3/4-ECH7WS-33 ■SSH22-ECH10WM-38 ■SSH25-ECH10WM-50 ■SSH1-ECH10WM-70 *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The capacity is 45, 32, 18! A compact aluminum organizer stand.

We would like to introduce our "AR Collet Organizer Stand." This is a compact organizer stand made of aluminum. We offer two sizes for the stand: 150×250×50 and 150×250×52. It is suitable for organizing and managing collets, and can also be stacked. Please feel free to contact us if you have any inquiries. 【Lineup】 ■CS-11 ■CS-16 ■CS-20 ■CS-25 ■CS-32 *For more details, please download the PDF or feel free to contact us.

• others

Use in combination with the main unit of the tap holder SST□□-ECH7 or with machines equipped with a synchronization function!

We would like to introduce the "Die Holder" that we handle. This is a die holder for die outer diameters φ16 and φ20. It is designed for use in combination with the main body of the tap holder SST□□-ECH7 or machines equipped with a synchronization function. Please feel free to contact us if you have any inquiries. 【Lineup】 ■ECH7-DH1 ■ECH7-DH2 *For more details, please download the PDF or feel free to contact us.

• Dice

Please use it instead of the keyless drill chuck (130-J6)!

We would like to introduce the "Jacob Taper Holder" that we handle. The compatible shank diameter is from 0.5 to 13φ. Please use it as a replacement for the keyless drill chuck (130-J6). Additionally, it will be used in combination with a collet, so please order them together. 【Specifications (partial)】 ■ Model: JT6-ECH13-80 ■ Compatible shank diameter: 0.5 to 13φ ■ Jacob Taper No.: JT6 *For more details, please download the PDF or feel free to contact us.

• Other machine elements

Interference avoidance! Introducing round shank holders used for machining centers and more.

We would like to introduce our "Collet Holder with No Flat on Round Shank." This is a round shank holder used for machining centers and similar applications. We can also manufacture special shank dimensions. Since it will be used in combination with a collet, please make sure to request both. 【Lineup (Partial)】 ■SS8-ECH5S-35 ■SS12-ECH5S-80 ■SS14-ECH7S-40 ■SS16-ECH7-40 ■SS20-ECH7-45 *For more details, please download the PDF or feel free to contact us.

• Other machine elements

Work interference / collet size change / easy adjustment of protrusion length!

We would like to introduce our "Tool Change Head AR Type." It can be easily installed by replacing the existing nut. Without having to change the main body of the rotating tool or collet holder, you can easily adjust for workpiece interference, change collet sizes, and modify the protrusion length. Please feel free to contact us if you have any inquiries. 【Features】 ■ Interference avoidance ■ Collet size change ■ Protrusion length change *For more details, please download the PDF or feel free to contact us.

• Other machine elements

To secure the boring bit with a side lock, the tip position is stabilized!

We would like to introduce our "Boring Bar Holder." This is a boring sleeve for NC lathes. To secure the boring tool with a side lock, the cutting edge position is more stable compared to clamping with an AR collet. We can also manufacture special shank dimensions, so please feel free to contact us when you need assistance. 【Lineup】 ■SSH16-BSH4-70 ■SSH20-BSH4-70 ■SSH3/4-BSH4-70 ■SSH22-BSH4-100 ■SSH25-BSH4-100 *For more details, please download the PDF or feel free to contact us.

• Other machine elements

Introducing the Alps Tool collet holder with mm/Inch specifications!

We would like to introduce our "Coolant Through Collet Holder with Pipe Thread." We offer two types: one suitable for turret lathes and the other suitable for automatic lathes. These are designed to be used in combination with coolant collets, so please order them together. Additionally, we can manufacture special shank dimensions. 【Product Lineup (partial)】 ■SSH20-ECH7OH-70 ■SSH25-ECH10OH-70 ■SSH32-ECH13OH-75 ■SSH3/4-ECH10OH-105 ■SSH1-ECH10OH-105 *For more details, please download the PDF or feel free to contact us.

• Other machine elements

Introducing a small and short holder suitable for Swiss-type and knife-edge NC lathes!

We would like to introduce our "Short Nose Collet Holder Inch Specification." This short nose design minimizes the protrusion length, allowing for the use of nice mills even in machines with a narrow tooling zone. We also manufacture special shank dimensions. Please feel free to contact us if you have any requests. 【Lineup (Partial)】 ■SSH5/8-ECH7S-70 ■SSH3/4-ECH7S-40 ■SSH1-ECH7S-70 *For more details, please download the PDF or feel free to contact us.

• Other machine elements

A rich lineup of milling chucks, collets, collet holders, and more!

This catalog introduces the "MC TOOLING SYSTEM" for machining centers. It features a wide range of products, including the "Milling Chuck TR type," which balances high speed, high precision, high rigidity, and high gripping power, as well as the "Collet Holder EXH type," known for its slim shape, high precision, high balance, and excellent versatility. The catalog includes photographs and diagrams, making it easy to reference when selecting products. 【Contents (partial)】 ■ Milling Chucks ■ Collets ■ Collet Holders ■ SS Collet Holders ■ AR Chuck Collets *For more details, please download the PDF or feel free to contact us.

• Other machine tools
• Other processing machines
• Machining Center

A rich lineup of milling chucks, straight collets, collet holders, and more!

This catalog introduces the two-sided clamping tooling for machining centers, the "HSK Tooling System." It features the "Milling Chuck TR Type," which balances high speed, high precision, high rigidity, and high gripping force, as well as the "Collet Holder (EXH Type)" known for its slim design, high balance, and excellent versatility. This book serves as a useful reference when selecting products. [Contents (partial)] ■ Milling Chucks ■ Straight Collets ■ Collet Holders ■ Wrenches and Nuts ■ AR Collets *For more details, please download the PDF or feel free to contact us.

• Other machine tools
• Other processing machines
• Machining Center

A series with a variety of products such as collet holders, AR collets, and nuts, tailored to meet your needs!

This catalog introduces the "NICE MILL SERIES" tooling for CNC lathes by Alps Tools. It features a wide range of products including standard AR collets, AR coolant-through OH type and C type, AR tap collet GB type, AR coolant tap collet GH type, and collet holders. This series is designed to be compatible with collet holders, AR collets, nuts, and other tooling, providing total support for machine tool tooling. [Contents (partial)] ■ Standard AR collet ■ AR coolant-through OH type ■ AR coolant-through C type ■ AR tap collet GB type ■ AR coolant tap collet GH type *For more details, please download the PDF or feel free to contact us.

• lathe
• Other machine tools
• Other processing machines

Utilizing the difference in thermal expansion rates between the holder and the cutting tool, the tool is chucked with high precision and gripping force!

This catalog introduces the baked bimetal chucking system "Thermo Grip." It includes a wealth of information such as technical documentation, the compact manual type "ISG1000 Series," and the air-cooled manual type "ISG2430TLK Series." The Thermo Grip chuck achieves industry-leading high heat resistance and long lifespan through the use of special heat-resistant steel and appropriate heat treatment. 【Contents (partial)】 ■ Baked bimetal devices ■ Baked bimetal chucks ■ ISG1000-208V ■ ISG2430TLK-3.2-FS ■ ISG3430TLK-11-WS *For more details, please download the PDF or feel free to contact us.

• Other machine tools
• Other processing machines

Colette uses our standard AS type! Common use across the series is possible.

We would like to introduce our standard collet chuck 'Ass'y' that we handle. We offer the "AS F type," which is mounted on the spindle end via a flange, and the "AS N type," which is more compact due to its cap being a nut type compared to the AS-F type. Both are stationary collets, ensuring stable gripping accuracy. Additionally, the use of dust pads and chip covers allows for extended cleaning intervals. 【Lineup】 ■AS F-S5 ■AS F-S5 1/2 ■AS F-S6 ■AS F-S8 ■AS N-S6 ■AS N-S8 *For more details, please download the PDF or feel free to contact us.

• Other machine tools
• Other processing machines

Material bending is less than 0.5mm per meter! (MAS404 standard, tolerance grade B or higher)

We would like to introduce our dry feeder 'Z-16'. The material diameter is the same for types 12, 16, and 20. It is a dry, oil-free type. Options include small diameter, oversized, roller plate stop, spindle vibration stop, shelf extension, and synchronization support. 【Specifications (partial)】 ■ Feed speed ・Forward: 800mm/s ・Reverse: 1,600mm/s ■ Voltage: AC200/220V ■ Power: 3-phase 1.5kVA ■ Frequency: 50Hz/60Hz *For more details, please download the PDF or feel free to contact us.

• Parts feeder

Featuring rectangular blanks, round blanks, and B1 type tool holders!

This catalog introduces "VDI TOOL HOLDERS" compliant with DIN69880 standards. It includes rectangular blanks, round blanks, various types of tool holders, protective plugs, side lock holders, collet holders, Morse taper holders, and more. Additionally, we also introduce VDI shank rotary tools made to fit the specifications of this machine. Please make use of this information for product selection. 【Contents (partial)】 ■ Rectangular blanks ■ Round blanks ■ Tool holder type B1 ■ Tool holder type B2 ■ Tool holder type B3 *For more details, please download the PDF or feel free to contact us.

• Other machine tools
• Other processing machines

Multiple output work data can be saved (5 points as standard)! It can be increased with optional support.

The "SWP-RB65" is a shaft work unloading device capable of handling material diameters from Φ10 to Φ65mm and lengths from L=200 to 1,500mm. It achieves high stability in gripping and transporting through a pneumatic open-close finger chuck. The design minimizes the installation area thanks to a shortening mechanism. Equipped with an "automatic preparation button," it can automatically operate to a state where automatic driving can be started with the push of a single button, regardless of the situation. 【Specifications (partial)】 ■ Material diameter: Φ10 to Φ65mm ■ Material length: 200 to 1,500mm (subject to constraints based on lathe and material weight) ■ Workpiece weight: up to 23kg per piece ■ Device weight: 700kg ■ Delivery speed: 500mm/s (forward and backward) *For more details, please download the PDF or feel free to contact us.

• Parts feeder

Fast processing cycle products, large stock of materials! Safe material supply.

The SL80 is an airless type material stock lifter characterized by its ability to operate unattended for long periods. Since the top is open, materials can be loaded using an overhead crane. It can also be supplied by forklift or cart. It allows for easy feeding of heavy materials onto the bar feeder shelves. Additionally, it has a structure that can be easily installed onto existing bar feeders. 【Lineup】 ■ Lifter for long materials ■ Lifter for short materials *For more details, please download the PDF or feel free to contact us.

• Parts feeder

Since the material supply machine has independent control, it can be added to existing equipment!

The SL26 is a material stock lifter that features a large opening upper cover, allowing for material loading on the ceiling rail. Operation is very simple. Just place the material and press the automatic button on the device. It can achieve up to a 57% reduction in floor space compared to shelf extension specifications, all while being space-saving. It can now easily extract small-diameter materials from bundles, eliminating the hassle of aligning materials on shelves. 【Specifications (partial)】 ■ Material diameter: φ6 to 26mm ■ Material type: Must be metallic (reacts to magnetic proximity switches) ■ Voltage: Single-phase AC 200V ■ Power: 0.3kVA ■ Frequency: 50/60Hz *For more details, please download the PDF or feel free to contact us.

• Parts feeder

Compact and lightweight with excellent repeatability, featuring a quick change system with fine adjustment for temporary tightening!

The "AQT System" is a tooling system for comb blade-type NC lathes that employs a temporary clamping method to achieve comfortable center height adjustment. From the basic components such as the structure of the clamp unit and change holder to the special mechanism that allows for fine adjustments of the center height, this high-grade tool clears the highest levels in all aspects, including quick change and center height fine adjustment using just one wrench. 【Features】 ■ Small body packed with high performance ■ Adopts a temporary clamping method for comfortable center height adjustment ■ A tool that embodies consideration ■ Adjustable for easy center height adjustment and labor-saving benefits ■ Easy to set up and operate *For more details, please download the PDF or feel free to contact us.

• lathe

The multi-tasking machine (MTM), of course, is a suitable two-sided restrained coupling for CNC lathes and machining centers!

This catalog introduces the "Alps Capt" coupling, which consists of a polygonal shape with a 1/20 taper and end faces, featuring two-sided constraints. It includes a wealth of information such as product overview, technical documents, tooling systems, rotary (mill) tools, turning tools, and collet holders (EXH type). The high rigidity and precision of this product make it suitable for all types of machining, including turning, milling, and drilling. [Contents (partial)] ■ What is Alps Capt ■ Technical documents ■ Tooling systems ■ Rotary (mill) tools ■ Turning tools *For more details, please download the PDF or feel free to contact us.

• Other machine tools
• Other processing machines

Of course, it provides a chaotic supply of materials and is equipped with various self-diagnostic functions! It safely supports unmanned operation.

The "ASQ-E120" is an airless short material feeder that achieves a quieter factory environment through the quiet extraction of materials. During processing, the feed pipe separates from the bar stock, allowing for 100% performance of the lathe without vibration or noise. Additionally, the overall length of the unit is space-saving and easy to handle, and retrofitting is also simple. Please feel free to contact us when you need assistance. 【Features】 ■ Quietness ■ Vibration control ■ Space efficiency ■ Safety *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

The slide mechanism can move back and forth! Immediate forward movement upon initial introduction reduces material exchange time.

The "ASQ-51II" is a short material feeder with a touch panel control board, making setup and maintenance easy. It comes standard with a sliding device, allowing for easy replacement of the spindle insert pipe on the lathe side. The immediate forward movement after initial setup reduces material changeover time. Please feel free to contact us when you need assistance. 【Features】 ■ Work efficiency ■ Production efficiency ■ Sliding device *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

During processing, the feed pipe separates from the bar stock! The lathe performance is demonstrated at 100% without vibration or noise.

The "ASQ-E80" is an easy-to-handle, airless type short material feeder that is also easy to retrofit. It supports the supply of irregular materials and is equipped with various self-diagnosis functions to safely assist in unmanned operation. It comes standard with a sliding device, making it easy to replace the insertion pipe in the spindle side of the lathe. Additionally, by inputting material sizes from the operation panel, setup time is reduced. 【Features】 ■ Sliding device ■ Vibration countermeasures ■ Space efficiency ■ Safety ■ Work efficiency *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

The range of material handling is wide! It can be easily attached to the standard tool position.

We would like to introduce our pull holder, the 'PT-45/70'. It can be easily attached to the standard tool position. Due to its compact design, it can be installed with minimal tool interference. Additionally, if there is material left, the safety device will prevent the material from being pulled out. Please feel free to contact us when you need assistance. 【Features】 ■ Wide material gripping range ■ Easy installation at the standard tool position ■ Compact design allows for minimal tool interference *For more details, please download the PDF or feel free to contact us.

• Processing Jig

Essential for bar processing! Products with automatic feeding, automatic chucks, and front and rear legs are also available.

The "DC-45" is a bar end processing machine that cuts by fixing the bar stock and rotating the tool. By changing the tool holder, chamfering, step cutting, and center processing are possible. It features easy operation and free mobility. Additionally, this product is a manual tabletop type (standard). Please feel free to contact us when you need assistance. 【Features】 ■ Cutting by fixing the bar stock and rotating the tool ■ Easy operation and free mobility ■ Chamfering, step cutting, and center processing possible by changing the tool holder *For more details, please download the PDF or feel free to contact us.

• Other processing machines

The upper opening and closing cover can be opened from either the front or back for added convenience!

The "CLXA 45" is an oil feeder that achieves stable continuous operation with reliable residual material discharge. With its unique support shape, it offers excellent vibration performance and quietness. The amount of oil used is 20L for the 2.5m specification, which is a 50% reduction compared to conventional models. Additionally, the size of the unit is shortened by 10% compared to conventional models. Please feel free to contact us when you need assistance. 【Features】 ■ Vibration countermeasures (unique support shape) ■ Reliable residual material discharge ■ Reduced oil quantity ■ Improved work efficiency ■ Reduced unit size *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

The amount of oil used is 30L for a 3.0m machine, which is a 50% reduction compared to conventional machines!

"CELSUS 51" is an oil feeder that allows for easy replacement of supports thanks to its unique quick-change mechanism. With its unique support shape, it offers excellent vibration damping and quietness. The dimensions of the unit have been reduced compared to conventional models, with a total length reduction of 138mm and a height reduction of 78mm. Additionally, the material supply port allows for material supply by opening the supply port cover. Please feel free to contact us when you need assistance. 【Features】 ■ Excellent vibration damping and quietness with a unique support shape ■ Reduced unit size ■ Decreased oil consumption ■ Numerous user-friendly features implemented *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

The material supply port allows for material supply without opening the cover! Many features have been implemented with consideration for the operator.

The "CELSUS 26" is an oil feeder with a reduced size compared to conventional models. Thanks to its unique quick-change mechanism, replacing the support is easy. The oil usage is 10L, which is a 50% reduction compared to conventional models. Additionally, its unique support shape provides excellent vibration damping performance and quietness. Please feel free to contact us when you need assistance. 【Features】 ■ Vibration countermeasures ■ Space efficiency ■ Oil quantity ■ Operability *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

The unique quick-change mechanism makes it easy to replace the support!

The "CELSUS 20" is an oil feeder with a unique support shape that offers excellent vibration resistance and quiet operation. The handheld control panel is equipped with numerous features designed with the operator in mind. The amount of oil used is reduced by 50% compared to conventional models, at 10L. Additionally, the size of the unit has been reduced, with an overall length that is 74mm shorter and a height that is 119mm shorter than conventional models. 【Features】 ■ Vibration countermeasures ■ Space efficiency ■ Oil quantity ■ Operability *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

The oil pump is energy-saving type! Residual material can be extracted from either side.

We would like to introduce the oil feeder 'AZ12X' that we handle. It follows the high-speed movement of the lathe spindle thanks to the synchronous (spindle synchronization) device (OP). Vibration and noise reduction effects have been improved. Additionally, by adopting a linear slide, it has a structure that emphasizes mobility and rigidity. Please feel free to contact us when you need assistance. 【Features】 ■ Vibration countermeasures ■ Synchronous device ■ The delivery section uses a linear slide ■ Energy-saving *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

With the synchro (main spindle synchronization) device (OP), it follows the high-speed movement of the lathe spindle!

We would like to introduce our dry feeder "AZ12" that we handle. The delivery section features a structure that emphasizes mobility and rigidity by adopting a linear slide. This improves vibration and noise reduction effects. Additionally, with the synchronous (main spindle synchronization) device (optional), it follows the high-speed movement of the lathe spindle. 【Features】 ■ Delivery section adopts linear slide ■ Synchronous ■ Vibration countermeasures *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

The upper opening and closing cover can be opened from either the front or the back for added convenience!

We would like to introduce the oil feeder "ASR X-20ZII" that we handle. The upper opening and closing cover can be opened from either the front or back for convenience. A synchronous (main spindle synchronization) device (optional) can be installed. The small diameter specification is optional. Please choose based on the CNC lathe and processing conditions you will be using. Feel free to contact us when you need assistance. 【Features】 ■ Work efficiency ■ Synchronous device *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

Unique oil support and large roller support applied to the front and intermediate vibration damping sections, further enhancing vibration reduction effectiveness!

We would like to introduce the oil feeder "ASR X-32PN3" that we handle. It features a unique oil support and large roller supports at the tip and intermediate vibration dampening sections, further enhancing its vibration reduction effect. Additionally, the upper opening and closing cover can be opened from either side, making setup changes and maintenance even easier. 【Features】 ■ Vibration countermeasures ■ Upper opening and closing cover *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

Suitable for a wide range of sizes from Φ8 to Φ60(65)mm and hexagonal materials from H10 to H46mm!

We would like to introduce the oil feeder "ASR X-65Ev" that we handle. The top opening cover can be opened from both the front and back, providing convenience. It also accommodates a wide range of sizes from Φ8 to Φ60(65)mm and hexagonal materials from H10 to H46mm. 【Features】 ■ Work efficiency ■ Compatibility with a wide range of sizes *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

The upper opening and closing cover can be opened from either the front or back for added convenience!

We would like to introduce the oil feeder 'ASR X-45/51PN3' that we handle. It features unique oil support and large roller supports at the tip and intermediate vibration dampening sections, further enhancing vibration reduction. Additionally, the upper opening and closing cover can be opened from either the front or back, providing convenience. 【Features】 ■ Vibration countermeasures ■ Work efficiency *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

Due to the precise synchronization device and servo motor providing quantitative control, stress does not occur on the workpiece during processing, allowing for stable high-speed rotation.

We handle the oil feeder "ASR X-04A/07A." 【Features】 ■ Quantitative control using a precision synchro device and servo motor ■ No hassle of aligning ultra-fine materials on the shelf as materials are stocked in bundles ■ Right-hand or left-hand configurations available due to the automatic mounting type ■ Can store 500 pieces of φ1mm material ＼ For more details, please check by downloading the catalog ／

• Parts feeder
• Feeder

Achieve stable continuous operation through reliable residual material processing! Enhance the vibration damping effect of hexagonal materials.

The "ASR RX45Ev/51Ev" is an oil feeder that realizes convenience. It achieves stable continuous operation through reliable residual material processing. The tip vibration stop enhances the vibration stopping effect of hexagonal materials mainly through an oil-type rotating bush. Please feel free to contact us when you need assistance. 【Features】 ■ Work efficiency ■ Residual material processing ■ Vibration stopping effect *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

The upper opening and closing cover can be opened and closed from either side! Setup changes and maintenance are even easier.

The "ASR RX32Ev" is an oil feeder that achieves stable continuous operation through reliable residual material processing. The tip vibration damper enhances the vibration stopping effect mainly for hexagonal materials using an oil-type rotating bush. Replacement parts, options, and special specifications will be quoted separately. Please feel free to contact us when you need assistance. 【Features】 ■ Upper opening and closing cover ■ Residual material processing ■ Vibration stopping effect *For more details, please download the PDF or feel free to contact us.

• Parts feeder
• Feeder

[Speaker] Representative Director of KKR Consulting Co., Ltd. Director of Yamada Junya Tax Accountant Office, Tax Accountant Junya Yamada Tax Accountant Mika Ikeda [Lecture Items] ● Explanation of recent renewable energy installation methods, subsidy systems, and tax incentives ● Regarding subsidy systems, explanation of local government subsidies mainly in the Kanto region 【1】Latest renewable energy schemes 【2】Explanation of renewable energy-related subsidies 1. National subsidies 2. Local government subsidies mainly in the Kanto region Tokyo, Kanagawa, Chiba, Saitama, Tochigi, Ibaraki, Gunma, etc. 【3】Explanation of tax systems related to renewable energy generation equipment and storage batteries 1. Immediate depreciation under the Small and Medium-sized Enterprise Management Enhancement Tax System 2. Carbon Neutral Tax System (applicable to large enterprises) 3. Reduction system under the Advanced Equipment Introduction Plan 4. Newly established in FY2026: Productivity Improvement Equipment Investment Promotion Tax System 【4】Q&A / Business card exchange

[Lecturer] Shinsuke Tsutsui, Senior Partner, A.T. Kearney, Inc. Energy Practice [Key Lecture Content] Japan's electricity and energy market is facing significant changes, but the impact of these changes is not necessarily definitive and continues to increase future uncertainties. Against the backdrop of the recent rapid expansion of generative AI and data centers, the previously assumed scenarios for electricity demand suppression are being significantly reassessed, though opinions on this are not uniform. Additionally, on the supply side, the business environment is becoming increasingly challenging due to rising costs and increased risks associated with renewable energy, raising doubts about the assumption of continued expansion, including offshore wind power. The energy basic plan, approved by the Cabinet in February 2025, is not functioning adequately as a foundation for management and business strategies in light of this background. Furthermore, with the introduction of new markets and systems such as real-time markets, supply capacity obligations, medium- to long-term markets, and GX-ETS on the horizon, the ability to respond to regulations has become a key factor in the competitiveness of electricity and energy businesses. In this lecture, we will consider the changes in demand and supply structures, the impact of new markets/systems, and the influence of political and international situations, exploring the key points that companies should focus on in their strategic considerations post-2025 from multiple perspectives.

We are pleased to announce that our company will be exhibiting at the "35th UOS Kansai IT POWER UP Fair 2025," which will be held on Wednesday, October 29, 2025. ▼ Event Overview This exhibition will showcase the latest IT tools from the Kansai region, featuring a total of 27 solutions. We will be presenting "Smartsheet." Date: Wednesday, October 29, 2025, from 11:00 AM to 5:30 PM (Registration starts at 10:45 AM) Location: Osaka Industry Creation Center, 3rd and 4th Floors, 1-4-5 Honmachi, Chuo Ward, Osaka City, Osaka Prefecture Organizer: UOS Group Kansai Branch Participation Method: Pre-registration (free) To register, click here Official website: https://fair.uos.gr.jp/form/kansai2025/ ✔ Those interested in IT ✔ Those facing challenges in project management ✔ Those interested in Professor Fujii's lecture, etc. If you have any interest at all, we would be delighted to see you there! We look forward to welcoming you!

The popular training conducted by ISO certification bodies, which has been held 500 times nationwide over approximately 20 years, has now become an online seminar. This online training can be taken safely from your workplace or home. With no burden of traveling to a venue, the efficient online seminar is now the preferred choice! While many training courses typically last two days, this course has carefully selected key points and is designed to be mastered efficiently in one day. We have received numerous positive comments about having a fulfilling day. Unlike many training sessions that consist of just listening to lectures, our program incorporates engaging elements such as practical group exercises and targeted training, along with explanations based on abundant audit examples and easy-to-understand texts that are also helpful for review. This has led to its adoption in regular training sessions by major manufacturers and global companies. [Feedback from participants] - The specific examples explained were easy to understand. - The text clearly summarized the important points of the standards. - The lecture content was not too formal, which was nice. - The explanations were thorough, allowing us to learn the key points even in a short time. - I enjoyed the group workshops even in the online seminar.

The popular training conducted by ISO certification bodies, which has been held 500 times nationwide over the past 20 years, has now become an online seminar. This online training can be taken safely from your workplace or home. With no burden of traveling to a venue, the efficient online seminar is now the preferred choice! While many training courses typically last two days, this course has carefully selected key points to be efficiently mastered in one day. We have received numerous positive comments about having a fulfilling day. Unlike many training sessions that involve just listening to lectures, our program incorporates engaging elements such as pointed training and practical group exercises, along with clear explanations based on abundant case studies, and easy-to-understand texts that are helpful for review. This has led to its adoption in regular training sessions by major manufacturers and global companies. [Feedback from participants] - The explanation of specific examples was easy to understand. - The text summarized the important points of the standards clearly. - The lecture content was not too formal, which was good. - The explanations were thorough, allowing us to learn the key points even in a short time. - I enjoyed the group workshops even in the online seminar.