We will exhibit at MEX Kanazawa 2025.

Wire cutting machine compatible with high-speed processing and difficult-to-cut materials for SiC processing.

【Molybdenum Wire Electrical Discharge Machine】 HB Series <<Advantages of Molybdenum Wire Electrical Discharge Machines>> 1. Capable of machining difficult-to-cut materials 2. Cost reduction through the repeated use of molybdenum steel wire 3. Shortened working time due to high-speed machining Also compatible with processing compound semiconductor materials (SiC). By using high-strength, tough, and durable molybdenum steel wire, we have made high-speed machining and processing of difficult materials possible. Until now, electrical discharge machining was expected to be time-consuming and costly, but the HB series achieves high-speed, low-cost machining by repeatedly using molybdenum steel wire that can withstand high currents. The processing fluid is sprayed, eliminating the need for ion exchange resin or water temperature management, resulting in a compact machine size and very low power consumption. If you are considering reducing processing time and costs, please take a moment to consider us. 《Test machining and actual machine viewing are also possible, so feel free to contact us!♪》

• Electric discharge machine

Utilize a small space effectively with a discharge machining tool the size of a tatami mat!

>>Features - A housing smaller than a tatami mat - Low cost due to the repeated use of molybdenum steel wire - Can be processed if it is a conductive material (such as carbide, nickel alloy, titanium, etc.) >>What is Molybdenum Wire? 1. By using molybdenum steel wire, which has excellent strength and toughness, in a wire electrical discharge machine, it enables the electrical discharge machining of "hard-to-machine materials." It can be processed if it is a conductive material. 2. Due to its strength and durability, it can be reused, allowing for lower operational costs compared to brass wire. It can also be used as a rough machining tool instead of a milling machine.

• Electric discharge machine

Significantly improve the setup efficiency of wire cutting and wire EDM machines with simple screwdriver tasks! This is a leveling base for parallel alignment.

For wire cutting processing, it is necessary to adjust by inserting shims to ensure the workpiece is parallel. The parallelism of the workpiece has a significant impact on the final product finish, so the processor spends a lot of time on this setup. It is a time-consuming and tedious task. However, since the machine is not operating during setup, from a management perspective, it is preferable to minimize the time spent on this... The solution to this is our designed and developed leveling base, the "PAD series"! It can easily resolve the leveling required for the pre-setup of wire cutting, which has previously taken a lot of time, with just this one product! By adopting precision balls at the support points, the independence of each adjustment axis is high, making it easy to adjust without affecting the results of other axes. Additionally, it has high durability due to simplified structure and a design that prevents foreign objects from entering the spring components. 【Features】 ■ Easily resolves leveling tasks ■ Significantly improves setup efficiency ■ High durability *For more details, please refer to the PDF document or feel free to contact us.

• Processing Jig

<Positioning accuracy of 0.005mm or better> Achieve significant cost reduction by shortening setup time! Improved machine operating rates are expected to increase production volume.

Our company, Ohno Seiko Co., Ltd., handles the "ZERO-POINT SYSTEMS," which is a "pneumatic positioning jig" designed to reduce setup time by attaching and detaching plates/jigs. By using this product, it is possible to prepare different workpieces outside while the machine is running, allowing for immediate processing of the next workpiece after the machine stops. This increases the machine's operating rate and significantly boosts daily production numbers. Moreover, the repeat positioning accuracy is excellent at 0.005mm, enabling continuous processing. Fixing and releasing are done solely by switching the air, making it usable with many machine tools. By preparing multiple plates, it allows for setup outside the machine. 【Product Lineup】 ■ 2-station set plate ■ 4-station set plate ■ 6-station set plate ■ Positioning pin ■ Direction pin ■ Lock pin ■ Protective plug ■ Fixing bolt The catalog also provides information on installation examples and usage. Please utilize it for product selection. *For more details, please refer to the PDF document or feel free to contact us.

• Processing Jig

The September issue of the monthly magazine "Convert Tech" features an article I wrote about the journey of Osaka Textile Machinery Co., Ltd. from its founding to the present, as well as the notable development of their OS Expander Roll products! The article concisely summarizes the latest technologies and case studies in the industry, so if you are interested in the field of web handling, I encourage you to take a look.

We have released a video on YouTube showcasing our close coverage by TV Osaka's information program "Yasashii News." Additionally, it includes footage of our exhibition at the Osaka-Kansai Expo, so please take a look. *Related link with URL Coverage and Broadcast Overview Program Name: TV Osaka "Yasashii News" Filming Content: Close coverage of the manufacturing process in the factory Interviews at the development site Introduction of our exhibition booth at the Osaka-Kansai Expo

We provide product information for the compact urethane wheel casters of the AGILA series. You can choose the wheel diameter and caster body according to your application and environment.

The exhibition has finally reached its last day! Thank you very much to all the customers who visited our booth during the event. Today is your last chance! We would be delighted if you could take this opportunity to see our products and technologies. All of our staff sincerely look forward to your visit!

What is Cloud Voicemail? It is an internet service that stores messages in the cloud (on the internet) when you are unable to answer incoming calls, allowing you to check the recordings from your computer or smartphone. Unlike recording on the media of the phone itself, there is no limit to the recording time. A key feature is that it does not become busy since it is processed by a program in the cloud. It is also referred to as voicemail. ★ Check voicemail without going to the office or store Whether on holidays, during closed hours, or when returning home directly, visiting, or working remotely, with cloud voicemail, you can play back and check recorded messages from anywhere. ★ For job reports in professions that often go directly to the field For staff who frequently work outside and go directly to the site, it is useful for reporting the start and end of their work. It can handle a surge of calls at the same time. ★ If you want to use your existing phone number for cloud voicemail Please use the forwarding service or forwarding function of your phone company (such as Voice Warp) to forward to the 050 number issued by Rimophone.