We have added 'UV/IR transmission, visible light cut filter' to our standard inventory.

This is a bandpass filter that achieves a sharp rise and high transmittance in the infrared range (905nm). It is ideal for TOF sensors and LiDAR.

Are you facing any of these issues? - Is it possible to only transmit specific wavelengths in the infrared range? - I would like a bandpass filter suitable for TOF sensors. - I heard that the wavelength used in LiDAR is 905nm; can you create a film for that? - Since light other than the desired wavelength will cause noise, I would like to widen the stop band. - Given the range of incident angles, can this be taken into account? - Is it possible to mount this on AGVs or OHTs? The 905nm bandpass filter is a filter that transmits specific wavelengths by utilizing light interference through the deposition of dielectric films. Based on our proven results in visible light, we can achieve sharp wavelength separation and high transmission rates in the infrared range (905nm) by controlling the deposition process, making it ideal for photoelectric sensors (such as TOF sensors) that require delicate light. We have standard stock items available, so please consider them. https://www.e-coating.jp/stock/cat/filmtype/bandpassfilter/

• Distance measuring device
• Image Processing Equipment
• Sensors

It is possible to efficiently transmit light while removing wavelengths that contribute to heat from the light source. It is ideal for medical lighting devices (such as dental mirrors).

【1】Are you facing any of these issues? ◆ I want to prevent the temperature from rising due to near-infrared light emitted from the light source. ◆ The device itself is getting hot, and I want to do something about it. ◆ Is it possible to reflect visible light while allowing near-infrared (NIR) to pass through? ◆ Can the wavelength range of the mirror be customized? 【2】What is a cold mirror? A cold mirror is a filter that transmits near-infrared light while reflecting visible light. By forming a dielectric multilayer film, it can efficiently transmit thermal radiation without absorption, removing wavelengths that contribute to heat contained in the light source. Additionally, due to the excellent heat resistance and weather resistance of the dielectric multilayer film, it plays a role in stabilizing products that incorporate the filter. Typical applications include liquid crystal projectors, medical lighting fixtures, and dental mirrors that you may have seen on dental chairs. It has the performance of a mirror while featuring a special coating that allows near-infrared wavelengths to pass through to prevent temperature rise in the irradiated area.

• mirror
• Processing Contract

It is a dielectric multilayer film filter that transmits visible light and reflects near-infrared light.

It is used as a near-infrared cut filter that adversely affects CCD devices such as video cameras. The optical characteristics, such as the wavelength position with a transmittance of 50%, transmittance, and cut wavelength band, can be set arbitrarily. (Are you facing such challenges?) Is it possible to cut only the wavelength of near-infrared light? I want to allow visible light to pass while blocking IR wavelengths. I want to suppress light that causes noise and increase the sensitivity of the sensor. Can the wavelength range I want to transmit be custom adjusted? Is it possible to process it to chip size?

• Other optical parts
• Color camera
• Sensors

It is a filter that efficiently cuts (reflects) short-wavelength UV (ultraviolet) light while allowing visible light to pass through.

What is a UV cut filter (ultraviolet cut filter)? It is a filter that cuts ultraviolet (UV) light while allowing visible light to pass through. In digital cameras, it is used to reduce chromatic aberration, and in liquid crystal projectors, it is used to prevent the degradation of liquid crystals and other optical components caused by the light from lamps (such as high-pressure mercury lamps), with the aim of cutting unnecessary ultraviolet light. Are you facing any of these issues? ◆ Is it possible to cut only the wavelength of ultraviolet light? ◆ Can a UV cut filter for projectors be coated? ◆ I would like to consult about the degradation of optical components. ◆ I would like to consult about filters that minimize the impact on the human body. ◆ Is it possible to custom adjust the wavelength range that I want to transmit?

• Other optical parts
• Lighting for image processing
• Sensors

The "Easy Quotation Simulation" is a new web feature that allows customers to instantly display the estimated cost of metal additive manufacturing by simply registering a basic ID and providing 3D data. Traditionally, calculating the estimate required various discussions between the customer and our staff regarding data layout and equipment selection, which sometimes resulted in longer wait times for the estimate. However, with the addition of this automated quotation feature, we can now provide an approximate price level that can be shown for free, as many times as needed, in as little as 3 minutes, tailored to the customer's convenience. This service is primarily aimed at customers who are considering incorporating metal additive manufacturing depending on the price. Please note that this is only a rough price level check, and the estimated amount may vary significantly based on the shape and other factors. Therefore, if the price level feels acceptable and you wish to continue considering it, we kindly ask you to contact us for a formal quotation as usual. For inquiries, please visit our website URL: https://www.jampt.jp/simulation/

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.