Poisson's ratio measurement

We will select the appropriate extensometer according to the measurement target, so please feel free to consult with us.

At Aites Co., Ltd., we conduct "Poisson's ratio measurement." Poisson's ratio is the ratio of longitudinal strain to lateral strain that occurs when a load is applied to an object, and it is necessary for strength calculations of materials. In the downloadable materials, we introduce the results of attaching strain gauges to test specimens, applying tensile loads using a universal testing machine, and examining the longitudinal and lateral strains obtained from the strain gauges. Please feel free to download and take a look. 【Measurement Examples】 ■ Measurement using strain gauges ■ Measurement using video extensometers *For more details, please download the PDF or feel free to contact us.

• Contract measurement
• Other Testing Contract

Leave it to us for everything from chemical analysis and physical testing to reliability testing! Introduction to our measurement and evaluation services.

Plastic extrusion/injection molding processing is set according to the heat resistance temperature (melting point Tm) of the raw materials, but due to the degradation and alteration of the materials, there are cases where molding becomes difficult at the specified setting temperature. By checking the melt flow rate (MFR) of plastic raw material pellets or powders, it is possible to determine whether there are any changes compared to conventional products. We present a case where untreated (no load), temperature and humidity load (constant temperature and humidity test), and UV-irradiated PP (polypropylene) were injected and evaluated at a temperature of 230°C and a load of 5kg, so please take a look at the PDF download. [Evaluation Case] ■PP: Polypropylene ■8585: 85°C 85% × 336 hours ■UV: UV irradiation 253.7nm × 336 hours ■Injection time: 10 minutes (converted from 3 minutes) *For more details, please refer to the PDF materials or feel free to contact us.

• Contract measurement
• Other contract services

Essential materials alongside metals and inorganic materials! Introducing examples of analysis and evaluation services for organic materials.

Organic materials such as solvents, additives, pharmaceuticals, and plastics are essential materials alongside metals and inorganic materials. They have a wide variety of types due to combinations of light elements, and their specificity arises from structures, intermolecular forces, and electron behavior. However, it seems that chemical instrumentation analysis and evaluation are necessary for a fundamental understanding of their properties. This document presents examples of analysis and evaluation services for organic materials. [Contents] ■ FT-IR analysis ■ GC-MS analysis ■ Molecular weight distribution evaluation by GPC (SEC) *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

The analysis device also supports the analysis and evaluation of polymers! Information on the configuration and principles of high-temperature SEC equipment is provided!

The molecular weight of resins such as plastics is not a single value but is composed of multiple molecular weights. By understanding this molecular weight and its distribution, it leads to a better understanding of the characteristics and degradation mechanisms of the resin. In this document, we will introduce a case study where we measured polypropylene resin (PP) samples with and without ultraviolet (UV) irradiation using a high-temperature GPC device suitable for measuring polyolefin-based materials that are difficult to dissolve in solvents at room temperature, and conducted data analysis. We encourage you to read it. [Contents] ■ Configuration and principles of high-temperature SEC ■ Analysis case: Molecular weight measurement of PP subjected to UV irradiation ■ Application examples ■ Specifications and considerations for high-temperature SEC *For more details, please refer to the PDF document or feel free to contact us.

• Contract measurement
• Other analyses
• Contract Analysis

Testing service for plastic films using a universal testing machine (autograph) in a heated environment!

The "tensile test" is a test that measures the load and displacement (elongation) when a material is pulled at a constant speed, in order to determine the physical and mechanical properties of the material. By pulling the test specimen in a constant temperature chamber, it is possible to determine and understand the temperature dependence of these properties. Our company is capable of conducting material property tests under temperature-controlled environments. We can also propose conditions tailored to the materials and properties you wish to measure. Please feel free to consult with us. 【Test Equipment Specifications】 ■ Constant Temperature Chamber Temperature Range: -40 to 250℃ ■ Load Cell: 50kN, 1kN ■ Load Accuracy: ±1% of load indication value ■ Test Speed: 0.0005 to 1000 mm/min ■ Travel Distance ・Tensile Test Section: 1485 mm *For more details, please refer to the PDF document or feel free to contact us.

• Strength Testing Equipment
• Other services

To accurately measure strain in a tensile test, measurement using a strain gauge is necessary!

We would like to introduce the "Tensile Property Evaluation Using a Strain Gauge Compatible with High-Extension Flexible Materials" that we offer. Tensile tests on NR rubber were conducted using both contact-type (compatible with high-extension and soft materials) and non-contact type (video) strain gauges, and the results were compared. To accurately determine strain in tensile tests, it is necessary to select an appropriate strain gauge and testing conditions based on the target material and measurement objectives. We will provide suggestions tailored to your inquiries. 【Comparison of Strain Gauges】 ■ Contact Type (Compatible with High-Extension and Soft Materials) - Suitable for materials with large extensions - Not suitable for brittle or easily deformable materials - Not usable in constant temperature baths ■ Non-Contact Type - No restrictions on materials *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices
• Other Testing Contract

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

We have launched a "Display Item Search Page" that allows you to search for unit houses currently on display at exhibition halls nationwide, which was made available on January 6, 2026. There are over 800 items listed on the website. You can filter by area, price range, size, purpose, product type, color, and more. You can also check exterior and interior photos, prices, facilities, and drawings/specifications online. If you're interested in a display item, you can directly inquire, make a reservation to visit, or consult via LINE. This is a convenient service that allows you to efficiently progress from comparison to detailed consideration. Please take a look!

A co-authored paper by Shin Otsuki from the Data Science Department and another author has been published in Oxford Open Materials Science. 【Paper Summary】 Title: The Exploration of Enhanced Methods in Data Science and Applications in Materials Science Authors: Raymond Wu, Shin Otsuki

"With high-precision dimming settings of 256/1000 gradations, you can achieve your desired results." The new 1-channel dedicated model LLBLM-A maximizes the performance of high-brightness LEDs. It offers high light stability through constant current control and flexibly accommodates a wide range of inspection and lighting applications with three types of interfaces: parallel, RS232C, and LAN. In addition to intuitive operation via the front panel, it supports high-precision dimming with 256/1000 gradations (256 gradations in parallel mode). The available emission colors are G (green) and B (blue). This new model balances stable light output with ease of use. For more details, please feel free to contact us.

Last month, we held a winter safety conference organized by our company. We have compiled the details and atmosphere of the day, as well as information on winter labor accidents, into a PDF. We would appreciate it if you could take a moment to read it.