【Coming Soon】Registration Open! Extreme Series PLUS: Practical Edition: Is That Selection Really Okay? How to Choose and Utilize Columns and Consumables to Enhance the Reliability of GC Analysis #ChooseUseMaster #FreeWebinar #Held on July 31! #Registration Open!

Important for food safety! Separation of isobaric polycyclic aromatic hydrocarbons.

The "Rxi-PAH GC Column" is a product designed by Restek that can uniquely separate polycyclic aromatic hydrocarbons (PAHs), which are important for food safety and cannot be separated by mass spectrometry, thanks to its high phenyl content stationary phase. It can easily separate difficult target substances like PAH4 from the European Food Safety Authority (EFSA) and allows for accurate quantification. You can achieve results that are not possible with general GC columns. 【Features】 ■ Separation of all EFSA PAH4 compounds ■ Suitable separation of chrysene from interfering PAHs ■ Complete separation of benzo[b], [k], [j], and [a] fluoranthene ■ 360℃ thermal stability ■ Analysis of low-volatility dibenzopyrene is possible *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

Low bleed, exceptional reproducibility! Groundbreaking Rxi column technology that lowers detection limits.

The "Rxi GC Column" is a high-performance GC column that combines excellent inertness, low bleed, and high inter-lot reproducibility. It excels in reproducibility of column efficiency, retention time, pre-bleed, and inertness for each column. Additionally, to provide high performance, all columns undergo individual quality inspections. Please utilize the more accurate and reliable results offered by this product for trace analysis. 【Features】 ■ Low detection limits ■ Highest level of inertness ■ Low bleed ■ Good reproducibility *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Packaged in a blister pack to maintain cleanliness! The evolved Blue Liner.

The "Topaz Liner for GC" is a blue liner with excellent stability. Since it is packaged in a blister pack, it can maintain cleanliness, and the conditioning time after liner replacement is reduced. With longer system uptime, more samples can be analyzed, leading to cost savings. 【Features】 ■ Inertness ■ Lot-to-lot reproducibility ■ Productivity ■ Blister packed *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

This is an online simulation software for GC method development/optimization that anyone can use for free by registering.

The EZGC Chromatogram Modeler has been renewed. It has become easier to use with the addition of advanced options such as selection of liquid phases, changes in carrier gases, and optimization of the obtained results.

• Analytical Equipment and Devices

Evolved Blue Liner! Innovative deactivation treatment, good reproducibility.

We would like to introduce our "Topaz GC Inlet Liner." By selecting a highly inert liner, we can prevent potential issues such as ghost peaks, tailing, peak disappearance, and deterioration of reproducibility. We offer a wide range of products for GC and Agilent GC. Please feel free to contact us if you have any requests. 【Features】 ■ Innovative inertization treatment ■ Good reproducibility ■ Improved productivity *For more details, please refer to the PDF document or feel free to contact us.

• Separation device

Easy, no download required! Simulate the changes in separation.

Restek's "Pro EZGC Chromatogram Modeler" is a web application that provides free separation simulations using WCOT-type GC columns. You can easily simulate separation checks and changes in separation when modifying the temperature program directly on our website without downloading anything to your PC. Various columns with significantly different selectivities of liquid phases are registered, and each liquid phase also has an available compound library. 【Features】 ■ Free separation simulations ■ Simulations can be performed on the website ■ Various columns with significantly different selectivities of liquid phases are registered ■ Each liquid phase has an available compound library ■ Multilingual support *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

It is possible to achieve both the assurance of food safety and the reduction of laboratory operating costs simultaneously!

We would like to introduce our "Rapid Analysis of MCPD using LPGC-MS." The rapid analysis of MCPD using Low-Pressure Gas Chromatography (LPGC) is twice as fast as conventional GC-MS analysis and reduces helium consumption by up to 69%. This technology allows laboratories to analyze more samples efficiently while reducing costs. Additionally, the column kits undergo leak testing before shipment and can be easily installed like standard capillary columns. 【Features】 ■ Twice the analysis speed compared to conventional GC-MS analysis ■ 69% reduction in helium usage compared to conventional GC-MS methods ■ The Rxi-17Sil MS kit undergoes leak testing before shipment and can be easily installed like standard capillary columns *For more details, please contact us or download the application note.

• Analytical Equipment and Devices
• Contract Analysis
• Technical and Reference Books

It is possible to achieve the speed that is an advantage of LPGC-MS with a simple column change!

This document provides an explanation of pesticide analysis in strawberries using LPGC-MS. The analysis of multi-component pesticide residues is essential for food safety testing, and laboratories are typically required to balance a large number of samples with a quick turnaround time. In addition to the explanation of LPGC-MS pesticide analysis, it also includes featured products, making it a useful reference. We encourage you to read it. 【Featured Products (partial)】 ■ Low-Pressure GC (LPGC) Column Kit ■ GC Multiresidue Pesticide Kit ■ Q-sep QuEChERS dSPE Tubes for Extract Cleanup ■ Q-sep QuEChERS Extraction Salts ■ Topaz GC Inlet Liners *For more details, please refer to the PDF document or feel free to contact us.

• Technical and Reference Books

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 27th INTERPHEX Week Tokyo https://www.interphex.jp/tokyo/ja-jp.html 【 Dates 】 July 9 (Wednesday) - 11 (Friday), 2025 10:00 AM - 5:00 PM 【 Venue 】 Tokyo Big Sight (3-11-1 Ariake, Koto-ku, Tokyo 135-0063)

Data Process Co., Ltd. will exhibit at "IT & Information Systems DXPO Osaka '26" held at Intex Osaka on February 26 (Thursday) and 27 (Friday). At our booth, we will introduce the latest DX solutions, centered around the electronic form solution "i-Reporter," which allows for direct input of paper forms on tablets, as well as "MotionBoard," which supports data utilization for both field and management levels. We will also have demo experiences and consultation corners available, showcasing useful case studies for information system departments in manufacturing, equipment, and distribution. Companies considering the introduction of electronic forms, as well as the digitization and visualization of data, are encouraged to stop by during this opportunity. We sincerely look forward to your visit.

We will explain the considerations for selecting the optimal filter, including the characteristics of membrane materials and structures, international and domestic regulations, and methods for estimating membrane area through small-scale tests. We will introduce key points for designing efficient and reliable filtration processes. 【Main Learning Content】 ■ Understanding the differences in filter materials and structures, and the selection points suitable for the process ■ Specific learning of methods for calculating membrane area using small-scale tests ■ Key points for filter selection and documentation in accordance with international and domestic regulations 【Seminar Overview】 ▪ Date: February 27 (Friday) from 3 PM (approximately 30 minutes) ▪ Method: Webinar recorded broadcast [Japanese, Free] *We apologize, but participation from individuals not affiliated with the same industry or using email addresses other than those of your organization is not permitted. Thank you for your understanding.

Tack Corporation will exhibit at the "AI/DX Sales and Marketing Expo 2026 Spring" held at Tokyo Big Sight. Based on our brand concept "Its evolution comes with ease of use," we provide product services with a focus on detail. We cater to a wide range of customer operations and will always introduce "user-friendly" systems from the customer's perspective. ◆ Event Overview Event Name: AI/DX Sales and Marketing Expo 2026 Spring Date: March 24 (Tuesday) - March 25 (Wednesday), 2026 Venue: Tokyo Big Sight, East Hall 4, 3-11-1 Ariake, Koto-ku, Tokyo 135-0063 ◆ Exhibition Content 【Takumi Series】 For manufacturing and construction industries 'Tack Smart Factory Cloud' For manufacturing and construction industries 'Tack Safety Gate' Security service 'Tack Secure Platform' We plan to showcase various other product services as well. If you have time, please come and visit us. ▼ For more details, please check the official website ▼ https://expo.ipros.jp/event/14277

In the fields of control design and system development, there is a demand for considerations at an earlier stage that do not rely on actual machine verification. In this webinar, we will introduce the concept of model-based development using Dymola, along with examples of its application in HVAC system control, data center cooling, and experiential evaluations in buildings and vehicle interiors. You will experience how integrating physical phenomena with a single modeling language can change the outlook of the design.