[Webinar] "TOC and VFA Measurement of Wastewater - Laboratory and Online Analytical Devices"

Simultaneous automatic measurement of TN and TP along with TOC! An online TOC analyzer that contributes to the optimization of wastewater processes.

●BioTector B7000 can measure TOC simultaneously with TN/TP. The simultaneous measurement cycle for TOC/TN/TP takes around 10 minutes, and it automatically cleans the sample tube while operating, eliminating downtime for cleaning clogged drainage. The short measurement cycle for TN/TP is well-received: some customers use it to measure only TN/TP or either one without measuring TOC. ●Measurement Time ◎TOC: <7 minutes ◎TN: TOC <7 minutes, TN <2 minutes ◎TP: TOC <10 minutes, TN/TP <8 minutes ●Measurement Range ◎TOC: Minimum 0-50 mg/L, Maximum 0-20,000 mg/L ◎TN: (Cell length 2mm) Minimum 0-19 mg/L, Maximum 0-5,000 mg/L, (Cell length 0.5mm) Minimum 2-55 mg/L, Maximum 160-15,000 mg/L ◎TP: (Cell length 10mm) Minimum 0-11 mg/L, Maximum 0-3,000 mg/L, (Cell length 5mm) Minimum 1-18 mg/L, Maximum 60-5,000 mg/L Please also check out the video summarizing "no clogging" in 50 seconds.

• Water quality testing

Supports particles up to 0.8mm - Laboratory TOC/TN Analyzer QP1680

The QP1680 is a laboratory TOC/TNb analyzer. Due to its combustion oxidation method, it can handle relatively high-concentration samples that contain fine particles and salts. In addition to the type that performs combined analysis of total organic carbon (TOC) and total bound nitrogen (TNb), there are also types that measure only TOC or only TNb, allowing you to choose according to your needs. Accurate measurement of TOC and TNb is essential for optimizing industrial processes, improving product quality, and protecting the environment. The QP1680 provides efficient monitoring and reliable measurement results.

• Water quality testing

Real-time VFA monitoring device to maximize the efficiency of methane fermentation in anaerobic digestion.

The online VFA meter EZ7200 series is a high-performance online titration device designed for monitoring wet anaerobic digestion tanks. It proposes a new management method for medium to large-scale anaerobic digestion processes. In biomass power generation, industrial wastewater, and sewage treatment, the anaerobic treatment of wastewater and sludge in fermentation tanks involves the breakdown of very complex organic carbon compounds, which presents challenges. Real-time measurement of VFA (volatile fatty acids) is effective for stabilizing the methane fermentation tank in anaerobic treatment. Relying solely on pH measurement and sampling can make it difficult to monitor the conditions inside the fermentation tank, depending on the timing. The ideal pH value inside the fermentation tank is said to be between 6.5 and 7.5, but measuring pH alone is not sufficient; adequate buffering capacity [total alkalinity TAC (also referred to simply as alkalinity)] is necessary to compensate for changes in acid concentration. By continuously monitoring VFA, which are intermediate substances during methane fermentation, it contributes to maintaining a more stable fermentation tank and maximizing gas production. By conducting online measurements at 10-15 minute intervals, it becomes possible to anticipate various events within the digestion tank in advance.

• Water quality testing

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

Creating 3D Plots Using Igor Pro ~3D Scatter Plots and Surface Plots~ This document introduces how to create a 3D scatter plot from a point cloud data given in XYZ coordinates using Igor Pro, as well as how to create a surface plot using the same data. 1. Overview of 3D Plots 2. Operation Demo: Creating a Scatter Plot 3. Operation Demo: Creating a Surface Plot

Sekisui Filler Co., Ltd. will exhibit at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Automotive Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coatings - Optical adhesives We sincerely look forward to your visit.

[Instructor] Hiroto Hayashi, Attorney at Law, New York State, Mori Hamada & Matsumoto Law Firm, Foreign Law Joint Enterprise [Key Lecture Content] Recently, batteries are expected to serve as a balancing power source for the realization of renewable energy as a primary power source. Due to changes in the business environment brought about by market development and government support measures, opportunities in the battery business are expanding. For grid-connected batteries, there are multiple options for long-term decarbonization power source auctions, tolling models, and merchant models, and the points of project development vary depending on the offtake method. Additionally, with the spread of the FIP system, the installation of batteries alongside renewable energy generation facilities is also progressing. In this lecture, we will explain the systems related to batteries, as well as key points for contract creation and negotiation, and financing necessary to steadily advance projects. We will also outline the challenges and prospects for project development and project finance formation according to each offtake scheme.

[Lecturer] Hideo Yamada, Ph.D. Honorary Professor, Waseda University Visiting Professor, Business Breakthrough University Graduate School [Key Lecture Content] Companies face various trade-offs (dilemmas) such as quality vs. cost, inventory levels vs. service levels, and standardization vs. differentiation. Traditionally, companies have responded to trade-offs by (1) finding a balance or (2) prioritizing one over the other. However, this does not lead to fundamental solutions. In this lecture, I will propose a third method that is neither balancing nor prioritizing. Using case studies from over 50 Japanese companies, I will explain it in an easy-to-understand manner. If we can turn long-standing trade-offs into trade-ons (coexistence), business opportunities will arise. [Lecture Topics] 1. What is a trade-off? 2. Trade-offs between customers and companies 3. Trade-offs within companies 4. Trade-offs within customers 5. How to turn trade-offs into trade-ons 6. Steps for exploration 7. Q&A / Business card exchange