ABB proposes cutting-edge energy efficiency technologies at TECHNO-FRONTIER 2025.

Achieve IE5 efficiency without magnets! Reduce electrical losses by 40% (compared to our IE3 motors)! Realize energy savings through replacement!

ABB's synchronous reluctance motor is designed to achieve outstanding energy efficiency, contributing to reduced power consumption and lower running costs as an IE5 ultra-high-efficiency motor. It reduces energy losses by up to 40%, significantly decreasing energy consumption and CO2 emissions. At Campbell Soup Company in Australia, the introduction of the IE5 ultra-high-efficiency motor "SynRM" has resulted in an annual electricity savings of approximately 1.45 million yen and an annual CO2 reduction of about 131 tons! This motor is a must-see for pump and blower manufacturers looking to enhance equipment efficiency and for companies aiming to achieve energy savings. 【Features】 ■ Designed to achieve ultra-high efficiency of IE5 ■ High torque & high output performance ■ Designed to withstand harsh industrial environments ■ Highly versatile, suitable for a wide range of applications in pumps, fans, material handling, and other industrial processes *For more details, please download the PDF or feel free to contact us.

• Other motors

Proposing higher motor efficiency and performance! IoT-compatible motor solutions through wireless communication.

The "EC Titanium Series" is a high-efficiency inverter-integrated motor with a special rotor structure that combines synchronous reluctance technology and permanent magnet technology. It achieves IE5 efficiency and features a design that is more advanced than conventional EC (electronically controlled) motors. Thanks to its unique advanced rotor structure and control technology, it enables higher efficiency across a wider speed range than any other motor solution. It is compatible with ABB Ability, allowing for condition monitoring and remote operation via wireless communication. 【Features】 ■ Achieves high system efficiency in both full load and partial load operations ■ Uses sustainable non-rare earth magnets ■ Eliminates costly wiring and installation hassles ■ Operates with low noise ■ Achieves higher motor output with a smaller frame size *For more details, please refer to the PDF materials or feel free to contact us.

• Fan motor
• Other motors

Proposing suitable solutions from a rich portfolio! Broadly compatible with efficiency standards from around the world.

We would like to introduce the "IEC Low Voltage Motors" that we handle. Our lineup includes a variety of products, starting with the flagship model "Induction Motor for Process" that represents ABB's low voltage motors, and the classic streamlined "General Purpose Induction Motor," as well as "Explosion-Proof Motors (Ex d/de)" and "Explosion-Proof Mining Motors," among many others. We provide low voltage motors that enhance energy efficiency and lifecycle value, suitable for various industries and applications. 【Partial Lineup】 ■ Induction Motor for Process ■ General Purpose Induction Motor ■ IE5 Synchronous Reluctance Motor ■ Water-Cooled Induction Motor ■ Permanent Magnet Synchronous Motor *For more details, please refer to the PDF materials or feel free to contact us.

• AC Motor
• Induction motor
• Other motors

Cost reduction effects at the IE5 efficiency level! Reducing the lifecycle costs of the plant and improving reliability.

The "Baldor-Reliance RPM AC Cooling Tower Direct Drive Motor (CTDD)" connects the motor to the fan and controls it with a unique drive, eliminating issues related to gearbox maintenance and failures. By combining proven high-performance (torque) AC permanent magnet motors with variable speed drive technology of equivalent performance, it reduces energy consumption and necessary maintenance. By realizing these advantages, it reduces the lifecycle costs of the plant and improves reliability. **Benefits of Direct Drive Motors** - Eliminates the need for gearboxes and related components, reducing maintenance time and costs - Reduces energy consumption - The motor's lifespan can reach five times that of a gearbox, achieving longer life - Eliminates the need for mechanical adjustments, enabling faster installation, reduced installation costs, and improved system efficiency *For more details, please download the PDF or feel free to contact us.*

• Cooling system

New solutions for air conditioning equipment! Reducing mechanical stress and improving reliability.

The "ERH" is an inverter-equipped outer rotor synchronous brushless EC motor that facilitates the installation of fan systems due to its compact design and lightweight, reducing assembly time and minimizing errors. With efficient design and high-quality components, it optimizes energy use and reduces maintenance, leading to cost savings throughout the entire lifespan of the system. Please feel free to contact us when you need assistance. 【Features】 ■ Variable speed operation ■ Ready to use with plug and play ■ Environmentally friendly design ■ Highly reliable and quiet operation *For more details, please download the PDF or feel free to contact us.

• Other motors

Ultra-high efficiency motors that contribute to PUE reduction and THDi 3% low harmonic VSD (inverter) that contributes to total cost and space reduction.

In a typical data center, the air conditioning and cooling systems consume about 40% of the total power, which is equivalent to the power consumption of server equipment. Fundamentally improving the power efficiency of the motors and VSDs (inverters), which are the main components of the air conditioning and cooling systems, directly contributes to energy savings and reductions in electricity costs for the entire data center. Additionally, harmonic measures lead to system optimization. We offer a lineup of inverters that meet the harmonic requirement of THDi below 5% required in data centers, including the "IE5 Ultra High Efficiency Synchronous Reluctance Motor (SynRM)" that maintains high efficiency even at partial loads and variable speeds, the "Inverter-Integrated Motor EC Titanium IE5+" that saves space and wiring, and the "Cooling Tower Directly Coupled Vertical Motor (CTDD)." These inverters meet the THDi of 3% without the need for additional equipment such as AC/DC reactors or active filters.

• Inverter

Maximize the benefits of SynRM technology! It is possible to extend the interval for grease replenishment.

We would like to introduce the "cool" performance of the SynRM motor. As a result of comprehensive testing of both SynRM and induction motors along with the drive, reliable data regarding bearing temperature was obtained. These results strongly support the view that the bearing temperature on the load side of this product is typically 5 to 15°C lower compared to the induction motor driven by the drive. 【Performance】 ■ Optimization of bearing performance with SynRM motor ■ Extended bearing lifespan ■ Improved efficiency and reliability *For more details, please download the PDF or feel free to contact us.

• Other motors

Achieving ultra-high efficiency with IE5. Significantly reducing running costs by lowering power consumption. A white paper detailing the technology is currently available.

The lifecycle cost of a motor is composed of 96% energy, making the use of energy-efficient motors the key to achieving energy savings. IE5 can reduce energy losses by up to 40% compared to IE3, contributing to the improvement of the overall energy efficiency of the system. In particular, low-voltage motor drive systems have pumps accounting for 40% of power consumption and fans for 20%, making them applications where energy savings and cost reductions are easily realized. In fact, after introducing our IE5 motor 'SynRM', we achieved an annual reduction of approximately 1.45 million yen in electricity costs and a reduction of about 131 tons of CO2 emissions annually. * Product catalogs and white papers (technical documents) are available for immediate viewing via PDF download. * We will be exhibiting this product at "Techno Frontier 2024." Please feel free to visit us. (Booth number: 1E-18)

• Other motors

No more worrying about thresholds! IoT predictive maintenance with remote condition monitoring sensors for rotating equipment | Cloud-based monitoring service

ABB Ability Smart Sensor enables advanced condition monitoring of rotating equipment and optimal maintenance planning. It is a battery-operated IoT wireless sensor equipped with vibration, surface temperature, magnetic flux (changes in magnetic flux density of the motor stator), and ultrasonic sensors. By installing just one on the surface of rotating machines like motors, it measures parameters to analyze health and performance, contributing to risk reduction in operations. The time of maintenance personnel is limited. Transform traditional time-based maintenance activities to create an environment where they can focus on important tasks! 【Features】 - Achieves cost reduction through cloud utilization - Compliant with domestic explosion-proof standards - Easy installation with smart technology - Intuitive interface 【Customer Benefits】 - No more worrying about thresholds - Early detection of equipment anomalies to reduce downtime - Realizes condition-based maintenance to cut costs - Optimization of processes to reduce operational and energy costs - Improved safety for workers through remote monitoring - Usable for various rotating machinery regardless of manufacturer

• Sensors

Gathering insights cultivated over a long history, we offer a wide range of low-pressure drives with outstanding performance!

ABB's low-voltage drives significantly improve process productivity, enhance energy efficiency, and reduce maintenance costs. They can achieve high speed control accuracy without an encoder, allowing for the possibility of omitting encoders in certain equipment. Additionally, the regenerative function distributes the braking energy of the motor back to the supply network, making it available for use by other equipment. 【Features】 ■ DTC control ■ In-house manufacturing of control panels ■ Low harmonic type ■ Power regeneration type *For more details, please download the PDF or feel free to contact us.

• Other process controls

Keep the network clean and save energy! 100% continuous power regeneration is possible.

The "ACS880 Low Harmonic Drive" is a product that can be easily provided through built-in harmonic reduction methods without the need for additional filters or special transformers. This compact and cost-effective solution meets stringent harmonic recommendations. We also offer the "ACS880 Power Regenerative Drive," which can continuously regenerate 100% of braking force back to the network. 【Features】 ■ Clean network ■ Minimized downtime ■ Optimization of cost and space ■ Maximization of motor performance and efficiency ■ Efficient use of energy *For more details, please download the PDF or feel free to contact us.

• Drive system parts

Contributing to cost reduction and environmental impact reduction with the most efficient solutions!

ABB's induction motors and synchronous motors achieve world-class efficiency and reliability. They operate stably even in harsh environments and provide appropriate solutions to meet diverse industrial needs by reducing operating costs through high efficiency. Please feel free to contact us when you need assistance. 【Main Portfolio】 ■ Totally enclosed fan-cooled induction motors ■ Modular induction motors ■ Explosion-proof induction motors ■ Large synchronous motors *For more details, please download the PDF or feel free to contact us.

• Power tools

A wide portfolio! Reducing customer opportunity loss due to defects.

ABB's synchronous generators combine high efficiency and high reliability, making them suitable products for power plants and industrial power sources. With a long-life design and excellent voltage control performance, they ensure stable power supply and demonstrate reliable performance even under harsh operating conditions. Please feel free to contact us when you need assistance. 【Main Portfolio】 ■ Synchronous generators for engines ■ Synchronous generators for data centers ■ Synchronous generators for steam turbines and gas turbines ■ Modular synchronous generators for engines ■ Permanent magnet shaft generators ■ Synchronous condensers *For more details, please download the PDF or feel free to contact us.

• Generators and transmission motors
• Generator

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

We are conducting a productivity improvement special campaign until the end of March 2025. Customers considering upgrading or adding rotary evaporators are encouraged to take advantage of this opportunity. The "Rotary Evaporator R-300," equipped with high-performance control and an electric lift, is available at a campaign price, including accessories such as a foam sensor that enables bumping prevention. Please check the flyer for more details. 【Target Products (Excerpt)】 ■ Rotary Evaporator R-100 ■ Rotary Evaporator R-300 (High-performance control type) ■ PTFE Diaphragm Vacuum Pump V-300 ■ PTFE Diaphragm Vacuum Pump V-600 (High vacuum type)

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

■7,744 yen (trial price) The assist suit "Second Generation Rakuemon" will be offered at a more affordable price of 7,744 yen (trial price). Rakuemon will continue to strive to maintain and improve quality, providing products that satisfy our customers. ■Product: Assist Suit "Second Generation Rakuemon" ■Implementation Date: July 7, 2025 ■Trial Price: 7,744 yen (including tax)