We will be exhibiting at the International Powder Technology Exhibition Osaka 2025!

【20th Anniversary Sales Campaign Now Underway!】Introducing a wet media-less micronization experimental machine that performs three functions: "emulsification, dispersion, and crushing" all in one device!

The "L-ES" is a tabletop experimental machine that performs three functions: emulsification, dispersion, and crushing, all in one unit. It serves as the standard model for wet media-free micronization experimental machines. 【Features】 ■ Tabletop design ■ Performs three functions (emulsification, dispersion, crushing) in one unit ■ Standard model for wet media-free micronization experimental machines ★ Celebrating 20 years of NanoVate sales with a special campaign ★ In commemoration of our 20th anniversary, we are offering a limited edition at an affordable price to express our gratitude to all customers. (Campaign period: Until September 30, 2025) *For more details, please refer to the PDF document or feel free to contact us.

• Emulsifier/Disperser
• Homogenizer

Achieving the "mixing" of various materials such as carbon, resin, ceramics, and thickeners!

"Damatri" is a powder-liquid mixing pipeline that allows for the mixing and dissolution of materials that tend to clump together with just one pipe. It reduces the conventional stirring time by one-third, achieving improved product quality. Additionally, it can be easily introduced by simply connecting the pipeline to existing lines. Please feel free to contact us when you need assistance. 【Features】 ■ Time reduction ■ Clump improvement ■ Easy connection *For more details, please refer to the PDF materials or feel free to contact us.

• Piping Materials
• Other powder equipment
• Other mixing and mixing equipment

Improvement of particle residue during application, prevention of clumping, and effective for viscous powder/liquid mixtures! Furthermore, it can be processed in an overwhelmingly shorter time than with a paddle mixer!

"Multi-Damatori <MDT>" has improved upon the conventional "Damatori." * "Damatori" is a mixing technology that solves issues related to materials that increase in viscosity, clump together, or foam during mixing and dissolution. Have you experienced any of the following symptoms with your current mixing equipment? ◎ Clumps remain even after stirring... ◎ Mixing and dissolution times do not decrease... ◎ Insufficient pre-treatment of CNT... ⇒ These issues can be improved with Multi-Damatori <MDT>! [Improvements from Damatori] ■ One pass through Multi-Damatori equals five passes ■ Flexible combinations of sizes ■ No accumulation of samples ■ Can be used with the existing Damatori (1/2) by simply replacing the contents * For more details, please refer to the PDF document or feel free to contact us.

• Other powder equipment
• Piping parts
• Other mixing and mixing equipment

By eliminating the rotating part, it allows for stirring and mixing without creating bubbles! It also contributes to reducing processing time.

The "Damatri System" is a mixing device that solves the problems of mixing and dissolving materials that increase in viscosity or become lumpy, as well as preventing foaming. Since there are no rotating parts, it provides stirring power equivalent to a homomixer while allowing for mixing without creating foam. It can quickly disperse materials such as food fibers that are difficult to blend with water, and it achieves a reduction in stirring time that was previously challenging. 【Features】 ■ Forcibly generates shear without short paths ■ Can handle viscosities around 2000 mPa·s ■ No rotating system, making it less likely to create foam during processing ■ Improves processing uniformity ■ Reduces processing time *For more details, please refer to the PDF document or feel free to contact us.

• Other powder equipment
• Other mixing and mixing equipment

Easy incorporation into water-based formulations such as lotions! O/W microemulsion of Elduo® PS-203 manufactured by high-pressure emulsification method.

The microemulsion "Micro 305, 305-P, Q10-0.3" (Micro Series) is a microemulsion that contains the amino acid-based emollient El Dew® PS-203. By incorporating the Micro Series into formulations, the moisturizing properties, skin roughness improvement effects, and damaged hair repair effects of El Dew® can be expected. Micro Q-10 is a microemulsion that includes CoQ10 (ubiquinone), which has been difficult to incorporate into aqueous formulations. This allows for the easy dispersion of CoQ10 in aqueous solutions at the desired concentration. 【Features】 ■ Particle size: 50–200 μm ■ Emulsifiers used are soybean lecithin and polyglycerin fatty acid esters ■ Easily added to aqueous formulations ■ As it is a fine particle, it penetrates the skin without stickiness, providing lasting moisture *For more details, please contact us or download the PDF. *For pricing and delivery inquiries, please contact Ajinomoto Healthy Supply Co., Ltd., Fragrance Division. TEL: 03-3563-7584

• Fats and oils
• others

Pre-dispersion is possible! Mixing through shock and turbulence obtained by passing through the complex flow paths inside the element.

"Multi-Damatori" is a product that contributes to the uniform mixing of powders and liquids. Carbon nanotubes were added to water and treated separately with this product and our "propeller mixer" for 30 minutes each. The treatment with this product resulted in the uniform dispersion of the agglomerated carbon nanotubes. This product is effective for pre-mixing powders and liquids that tend to leave clumps and increase viscosity. It is effective not only for carbon nanotubes but also for the pre-dispersion of various materials. Please verify its effectiveness through experiments or rentals.

• Mixer/agitator

We propose "Damatri System" and "NanoVator" for the uniform dispersion and mixing of carbon nanotubes. Comparison images with propeller stirring are currently available.

Our company manufactures and sells a wet-type micro-pulverization device called "NanoVita," which enables uniform dispersion and mixing of single-layer carbon nanotubes in resin. By processing with high shear force obtained at a maximum pressure of 200 MPa, our "damage-free dispersion treatment" minimizes damage to particles, allowing for the disaggregation of clusters without changing particle size, thus achieving uniform dispersion and mixing. This enables the enhancement of conductivity and thermal conductivity in resin materials, as well as improved heat resistance. ★ You can view product catalogs and materials comparing dispersion quality with propeller stirring treatment and damatari treatment by downloading the PDF. 【Product Features】 ■ Uniform dispersion without damaging particles due to powerful shear force ■ Fully explosion-proof air-type experimental machine, model: NV L-AS ■ Capable of emulsification, dispersion, and crushing tasks with a single unit ■ Media-less type with low risk of metal contamination ■ Development for films, mechanical parts, and medical fields, etc.

• Emulsifier/Disperser
• Homogenizer

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

On this occasion, we have opened a showroom for Tajima embroidery machines in conjunction with the renovation of the Chūnichi Jūki headquarters building. To commemorate the opening of the showroom, we will hold an exhibition of Tajima embroidery machines.

Next-generation large resin and metal 3D printers that achieve astonishing high-speed molding, low-cost, and high-precision molding are being rapidly introduced to the market. These printers are being utilized in the manufacturing of large parts and products in the aerospace, automotive, industrial machinery, plant, defense, and social infrastructure sectors, as well as in parts and mold repairs and reverse engineering. In this seminar, we will discuss the latest developments and features of cutting-edge machines from Stratasys, the largest manufacturer of large resin 3D printers, and Lobotics, along with domestic and international case studies. We will also explore innovative molding technologies from leading users such as Fujikohsai Industries and Sanko Gosei, who utilize large metal 3D printers from Meltio and Matsuura Machinery to create large metal parts, large metal products, and large mold components. The seminar will provide concrete and easy-to-understand explanations of key points and considerations for implementation and utilization, various manufacturing examples, and discussions on molding size, quality, cost, lead time, and success and failure stories. 3D printers enable the complex integrated molding of multiple parts into a single large shape, which was impossible with previous processing methods and technologies. This capability allows for a significant reduction in the number of parts, achieving short lead times, low costs, high-quality manufacturing, and a reduction in the number of processes and personnel involved.

Copper, which has a high laser reflectivity and quickly dissipates the thermal energy from laser irradiation, was difficult to shape using metal 3D printers. However, recently developed high-performance and high-functionality metal 3D printers, along with pure copper and copper alloy powders that have a high laser absorption rate and excellent 3D moldability, have been introduced to the market, and practical applications are rapidly advancing in leading companies. Metal 3D printers enable the creation of complex shapes and integrated structures, lattice/porous structures, and hybrid structures that were previously impossible, allowing for the innovation of parts, rapid development and prototyping of components, significant reduction in the number of parts, improved quality, lightweight and compact designs, and cost reduction. This has led to increased adoption and utilization in applications such as heating coils, heat sinks, heat exchangers, motor coils, and electronic and electrical devices. In this seminar, we will provide a clear and detailed explanation of the latest trends in pure copper and copper alloy powders suitable for 3D additive manufacturing, developed by Fukuda Metal Foil Powder Industry, as well as case studies of layered molding with pure copper and copper alloys. We will also discuss innovative molding technologies and examples that are unique to our company, as demonstrated by leading users such as TK Engineering, ODEC, and Fasotec, who are utilizing metal 3D printers to manufacture low-cost, high-quality copper components in a short time, sharing both success and failure stories.

We will hold an in-person event to introduce the latest technologies in molecular design. In addition to updates on the molecular design platform "Orion," we are scheduled to have cutting-edge research presentations by OpenEye and external speakers, including "the discovery of new leads by adding three-dimensionality to trillion-scale virtual screening" and "the identification of cryptic pockets that expand druggable areas." Furthermore, we will be introducing the next-generation shape similarity search tool "ROCS X," which was first unveiled at miniCUP Boston, for the first time in Japan at this event. ROCS X evolves the traditional ROCS, enabling faster and more accurate three-dimensional screening, contributing to the efficiency of lead discovery in drug research. Don't miss the latest technologies that accelerate the drug discovery process, including molecular modeling, structure-based drug design, and AI-driven screening! We look forward to your participation.