PIAB [Introduction to Innovation Video] piCLASSIC Neo – The Next Step in Modern and Sustainable Vacuum Technology

We have adopted the most energy-efficient ejector technology.

The medium-sized ejector "piCLASSIC Si model" adopts the most energy-efficient ejector technology. The Si cartridge is ideal for applications that require a large vacuum flow rate. It is suitable for handling porous workpieces and in cases of leaks. 【Features】 ○ The COAX Si32 three-stage cartridge can accommodate from 1 to 6 units. ○ Capacity expansion is easy as needed. ○ Lightweight and adopts a modular design that allows for various combinations. ○ Easy disassembly for maintenance. For more details, please contact us or download the catalog.

• Other machine elements

It demonstrates high operational reliability even with fluctuations in compressed air pressure and at low pressures.

The medium-sized ejector "piCLASSIC Pi model" adopts the most energy-efficient ejector technology. It demonstrates high operational reliability even with fluctuations in compressed air pressure or at low pressures. The COAX Pi48 three-stage cartridge has a large capacity that can accommodate between 1 to 6 units. The compact piCLASSIC can easily increase its capacity as needed. 【Features】 ○ Achieves high vacuum levels even at a supply pressure of 0.3 MPa ○ Lightweight and modular design allows for various combinations ○ Easy disassembly for maintenance For more details, please contact us or download the catalog.

• Other machine elements

It provides high flow at a vacuum level of up to 95 kPa.

The medium-sized ejector "piCLASSIC Xi model" adopts the most energy-efficient ejector technology. It has a large capacity that can utilize 1 to 6 COAX Xi40 three-stage cartridges. The small piCLASSIC can easily increase its capacity as needed. 【Features】 ○ The Xi cartridge provides high flow rates at a high vacuum level of up to 95 kPa. ○ Ideal for leak-free workpieces such as glass and steel plates. ○ Lightweight and modular design allows for various combinations. ○ Easy disassembly for maintenance. For more details, please contact us or download the catalog.

• Other machine elements

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The seismic sensing device "HK-2" transmits a signal to the control room and urgently stops facility equipment when it detects strong shaking equivalent to a seismic intensity of 5 weak or higher. 【Installation Location】 Automotive parts factory 【Challenge】 Due to the maintenance and replacement of the factory equipment control devices, we considered updating the existing seismic sensing devices as well, but since production had already ended, we were looking for alternatives. 【Effects After Installation】 The HK-2 has the function to urgently stop equipment during an earthquake, and since its functionality is the same as the existing devices, it was introduced as a replacement. Its compact size also allowed it to fit within the existing control panel being used. ★See more examples of the seismic sensing device "HK-2" https://www.hotron.co.jp/recommend/HK-2_lp.html#anchor_a04 ◎For more details, please download the materials or contact us.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. It is recommended for making doors that use touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Capable of detecting mask-wearing and measuring body temperature simultaneously with face recognition. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and alerts via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.