We will exhibit at "IIFES 2025" (Koto City, Tokyo).

By packaging the necessary equipment, you can start visualization without the need for cumbersome on-site surveys or design processes!

To make it easier for you to adopt the visualization system, we offer the "Gateway BOX," which consolidates and packages the necessary equipment for system construction inside an indoor plastic box! With just the "Gateway BOX," the required number of "PAL series sensors," and "bus cables," you can start visualizing immediately. 【What was the situation before?】 - Conducting on-site surveys for system implementation was time-consuming. - Designing equipment such as housing boxes for each facility required both time and money. 【With the Gateway BOX!】 1. Simply perform a simple setup. 2. Just connect and install the Gateway BOX and PAL series sensors. ｜You can build a visualization environment without the hassle of on-site surveys or design processes｜ 【Contents of the Gateway BOX】 - 1 PUSHLOG unit - 1 power supply (for driving PUSHLOG and PAL series sensors) - 1 AC100V plug This is a small-scale, trial-oriented system implementation plan suitable for those who want to start visualizing! *PUSHLOG is a product of GUGEN Co., Ltd.

• Other security and surveillance systems
• Power Monitoring Equipment
• Demand Monitoring

An IoT sensor (60A to 630A) with built-in communication functionality that can measure simple accumulated electric power compatible with Modbus communication, visualizing power consumption for each device.

The "PAL-Plus type E" is an IoT sensor with built-in communication capabilities that can measure simple accumulated electric power. We offer five sensors that support rated currents of 60A, 125A, 250A, 400A, and 630A. It allows for low-cost and easy visualization of power for each facility with just one unit. 【Three Key Points】 1. By adopting the Modbus RTU communication protocol, it offers excellent versatility and can be easily integrated into existing equipment. 2. As a split clamp-type sensor, it can be safely and easily installed on existing equipment without stopping its operation. 3. By incorporating communication functionality into the sensor, it achieves ultra-compact design, making it easy to install even when there are many measurement points. ｜What is Simple Measurement?｜ Based on pre-set voltage and power factor values, it calculates simple accumulated electric power and simple power from the measured current values. It can also output the accumulated current value, allowing for consistent energy reference values to be obtained. It supports single-phase two-wire and three-phase three-wire systems, and in the case of three-phase three-wire, it is converted and output as a three-phase balanced circuit. *Please feel free to contact us for more details about the product and simple measurement.

• Power meter
• Power Monitoring Equipment
• Demand Monitoring

This is an IoT sensor (temperature and humidity) with built-in communication functions that is inexpensive, compact, and easy to install, compatible with Modbus RTU communication.

The "PAL-Temp" is an IoT sensor with built-in communication capabilities that can measure temperature and humidity. 【Three Key Points】 1. By adopting the Modbus RTU communication protocol, it offers excellent versatility and can be easily integrated into existing systems. 2. Installation is completed simply by attaching it to the desired location using cable ties, making it easy to introduce into already established systems. 3. By incorporating communication functionality within the sensor, it achieves a compact and lightweight design. Its compactness allows for use without being limited by installation space. By combining it with the "PAL-Plus Unit," a gateway that has a signal conversion function to convert the sensor's signal to Modbus TCP and a power supply function for the sensor, it enables the construction of a more space-efficient and cost-effective system! For more details, please download the materials or feel free to contact us. Loan units are also available. | We also have a lineup of "PAL-Plus / PAL-Plus Large Capacity Version" that can measure AC current |

• Thermometer
• Thermo-hygrometer
• Other temperature and humidity measuring instruments

We will introduce the features of our measurement and monitoring system to address concerns such as 'I want to visualize the energy usage of our factory.'

Hexacore Co., Ltd. is a manufacturer based in Natori City, Miyagi Prefecture, specializing in the design, manufacturing, and sales of measurement and monitoring systems. Based on our extensive delivery record to various communication facilities such as data centers, we contribute to the "visualization of factories." 【We solve the following problems】 - We want to measure the power consumption of various equipment and the entire factory to reduce unnecessary power usage. - We want to manage humidity to prevent static electricity from occurring on circuit boards and other components. - We want to enable simple measurements using only a computer and sensors. - We would like to conduct measurements of special equipment and request joint development. 【Proposals】 - We want to manage the temperature and humidity of material shelves to maintain quality. ⇒ By measuring the indoor environment with the temperature and humidity sensor "PAL-Temp" and monitoring it with the manager "CEW-M4," you can easily manage temperature and humidity, which can be utilized for maintaining and improving quality. - We want to build an energy visualization system utilizing existing equipment. ⇒ By incorporating the AC current sensor "PAL-Plus" into the existing PLC (*), you can start visualization with familiar equipment. (*) Products compatible with Modbus communication.

• Other security and surveillance systems
• Power Monitoring Equipment
• Demand Monitoring

We will introduce an example of a system configuration using the "PAL series sensors × PLC," which is optimal for taking the first step towards visualizing electricity by utilizing already installed equipment.

Do you have any of these concerns regarding the visualization of electricity? - "I want to easily visualize" using existing equipment. - "I want to know the electricity consumption" of the factory equipment. - "I want to reduce unnecessary electricity" to keep electricity costs down. - "I want to check the current electricity consumption" without connecting to the network. | With the "PAL series sensors × PLC," you can build an optimal system to start visualizing using your existing equipment. | 【5 Benefits】 1. Compatible with Modbus RTU sensors, allowing connection to already installed Modbus communication-compatible PLCs. 2. Real-time visualization of equipment current values and more in a local environment. 3. Sensors can be connected to the bus cable, enabling installation tailored to the site. 4. Sensor capacities range from 60A to 630A (AC current), allowing selection based on current capacity and wire size. 5. As split clamp-type sensors, they can be easily installed on existing equipment without the need for power outage work.

• Ammeter
• Power Monitoring Equipment
• Demand Monitoring

Our company will be exhibiting at "IIFES 2025," which will be held at Tokyo Big Sight from November 19 (Wednesday) to November 21 (Friday), 2025. We will showcase a remote monitoring solution that can visualize the energy of factories and equipment in a "quick, easy, and compact" manner with actual devices. This exhibition will take place in the partner exhibition space within the GUGEN booth. 【Main Exhibited Products】 - Gateway BOX An IoT gateway compatible with Modbus that enables the visualization of energy in factories and equipment in a "quick, easy, and compact" manner. - PAL-Plus typeE2 We will introduce a "smart" clamp CT that can measure simple electric power for three-phase three-wire and single-phase three-wire systems. - PAL-Plus typeE A Modbus-compatible clamp CT that can easily be installed in narrow spaces and measures simple electric power for single-phase two-wire and three-phase three-wire systems. - PAL-Temp A compact, easy, and quick-to-install Modbus-compatible temperature and humidity sensor. We sincerely look forward to your visit.

We are pleased to announce that JP Generators Co., Ltd. will be exhibiting at the 46th Joint Disaster Prevention Drill of the Nine Prefectures and Cities, which will be held on November 9, 2025 (Sunday) at the Kanagawa venue of "Big Rescue Kanagawa." About "Big Rescue Kanagawa": Big Rescue Kanagawa is a practical comprehensive disaster prevention drill focused on medical rescue activities, conducted in cooperation with the prefecture and Miura City, along with medical and disaster prevention organizations. In addition to rescue training, we have prepared many enjoyable areas where you can learn about disaster prevention, including exhibitions and hands-on experience corners. We encourage everyone to participate! Our exhibited product will be the "Vehicle-mounted Generator | G-STREAM." We sincerely look forward to your visit.

Nitto Kohki will hold the "2024 Attack Fair in Ichihara" at the "Yume Hall" for two days from December 11 (Wednesday) to December 12 (Thursday), 2024. The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful souvenirs for visitors and many fun activities prepared. We look forward to welcoming everyone!

Toa DKK will exhibit at the "Hiroshima Waterworks Exhibition 2025" held from October 29 (Wednesday) to October 31 (Friday). Venue: Hiroshima Gate Park ◎ For simple measurements and continuous monitoring in environmental conservation sites ◎ ◎ For water quality analysis operations at water purification plants ◎ We will showcase our products centered around our company and HACH's water quality analyzers. Toa DKK Booth No. 126 <Main Exhibited Products> - Automatic water quality measurement device for tap water - Turbidity meter - Pocket residual chlorine meter - Desktop turbidity meter / Portable turbidity meter - Portable heavy metal analyzer Pre-registration can be done from the official website. https://suidoten.jp/2025/ >> We look forward to your visit! <<

We would like to inform you that we will be exhibiting products at the 46th Symposium on Biomembranes and Drug Interactions. If you are planning to attend, please feel free to stop by. ❚ Products to be Exhibited - Automated Patch Clamp System | Port-a-Patch mini This compact system eliminates the need for a microscope, vibration isolation table, manipulator, and Faraday cage, which are typically required for conventional patch clamp experiments. It allows for easy data acquisition and verification without the need for specialized skills or experience. - Liposome Preparation Device | Vesicle Prep Pro This is the world's first device capable of producing giant unilamellar vesicles (GUVs) with diameters ranging from 1 to 30 μm using the electroformation method (vibrating hydrated lipid films in an alternating electric field) without the use of organic solvents.