We have added 'Gold Mirror (Au Reflection Coating)' to our standard inventory.

We offer mirrors that combine reflective performance and cost-effectiveness. By depositing dielectric multilayers on the surface, we achieve excellent durability.

Are you facing any of these issues? ■ I want a mirror with a higher reflectivity than a standard aluminum mirror. ■ I want a durable mirror, but can it be designed with a dielectric? ■ Can you accommodate a wide range of incident angles? ■ The shape is special, but can it be shipped as a component? The aluminum enhanced reflective mirrors manufactured by Adachi Shin Sangyo Co., Ltd. can achieve excellent performance with minimal light loss during reflection and outstanding environmental durability by layering and controlling dielectrics. These mirrors can be customized to fit specific optical designs and are intended to have reflective characteristics suitable for specific wavelength ranges and applications.

• mirror
• Plastic processing machines (cutting and rolling)
• Sensors

It is possible to efficiently transmit light while removing wavelengths that contribute to heat from the light source. It is ideal for medical lighting devices (such as dental mirrors).

【1】Are you facing any of these issues? ◆ I want to prevent the temperature from rising due to near-infrared light emitted from the light source. ◆ The device itself is getting hot, and I want to do something about it. ◆ Is it possible to reflect visible light while allowing near-infrared (NIR) to pass through? ◆ Can the wavelength range of the mirror be customized? 【2】What is a cold mirror? A cold mirror is a filter that transmits near-infrared light while reflecting visible light. By forming a dielectric multilayer film, it can efficiently transmit thermal radiation without absorption, removing wavelengths that contribute to heat contained in the light source. Additionally, due to the excellent heat resistance and weather resistance of the dielectric multilayer film, it plays a role in stabilizing products that incorporate the filter. Typical applications include liquid crystal projectors, medical lighting fixtures, and dental mirrors that you may have seen on dental chairs. It has the performance of a mirror while featuring a special coating that allows near-infrared wavelengths to pass through to prevent temperature rise in the irradiated area.

• mirror
• Processing Contract

We propose a half mirror with abundant achievements. It is a functional half mirror that can arbitrarily split light into reflected and transmitted rays.

【1】Are you facing any of these issues? ◆ Can the degree of transmittance and reflectance be adjusted? ◆ Is there a way to modify it since the appearance changes with the angle? ◆ Is it possible to design and deposit even with dielectrics? ◆ Given the range of incident angles, can it be taken into consideration? ◆ The shape is special, but can it be shipped as a component? 【2】Features of the Adachi New Industry half mirror It is a functional half mirror that can arbitrarily split light into reflected and transmitted beams. By depositing dielectrics in multiple layers, it achieves extremely low absorption and minimal light loss, allowing for high-efficiency light splitting compared to using metal films. This product has a proven track record of being used in various devices, including FA sensors.

• Other optical parts
• Distance measuring device
• Sensors

Standard stock items include anti-reflective films, bandpass filters (BPF filters), and infrared cut filters (IR cut filters), among others.

We will start selling some optical thin film products (optical filter products) and patterned processing products as "standard stock items." We have responded to such requests! ◆ It's difficult to bear the cost of a whole batch when only a few pieces are needed for experiments... ◆ I want to see product development and performance tests quickly, so I need a few pieces at different levels... ◆ I just want to try it out for now... We often hear such voices through inquiries from our website. Even if custom-made filters are ultimately needed, I believe it is very difficult to define complete filter performance from the beginning.

• mirror
• Distance measuring device
• Sensors

We offer mirrors that combine reflective performance and cost-effectiveness. The main feature is that they have low dependence on the angle of incidence.

Aren't you troubled by things like this? - Can't you create a mirror that is not dependent on the angle of incidence? - I'm looking for a low-cost mirror, anyway. - I'm concerned about the reflectivity of just aluminum; is it possible to increase the reflectivity? - Is it possible to have a coating that is resistant to scratches and other damage? - The shape is special, but can it be shipped as a part? The mirrors produced by Adachi Shinsan Industry Co., Ltd. are characterized by their low dependence on the angle of incidence.

• mirror
• Plastic processing machines (cutting and rolling)
• Sensors

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensors wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors wirelessly notify in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.