High-Performance Materials Week Nagoya Mobility Material Exhibition Exhibit [Heat Dissipation / Electromagnetic Wave Shielding Resin / Molded Products]

Heat dissipation performance closer to metal materials than general-purpose resins! Proposing material and product design tailored to the quality requirements of various products.

At Sekisui Techno Molding, we handle "thermal conductive molded products." These molded products excel in the balance of impact resistance, lightweight, and thermal conductivity, offering heat dissipation performance closer to that of metal materials than general-purpose resins. Grades with low volume resistivity can be applied for EMC measures. We propose material and product designs tailored to the quality requirements of various products. Please feel free to contact us when you need assistance. 【Features】 ■ Achieves high heat dissipation and high impact resistance through unique material formulation technology ■ High lightweight effect achieved by resinizing metals ■ Product designs that leverage freedom of shape ■ Molded products with an excellent balance of impact resistance, lightweight, and thermal conductivity ■ Grades with low volume resistivity can be applied for EMC measures * For more details, please refer to the PDF materials or feel free to contact us.

• Other Auto Parts

If it is a heat-dissipating and electromagnetic wave shielding resin molded product, EMC measures essential for e-Axle and on-board chargers (OBC) can also be achieved.

The electrification of automobiles requires EMC design that is more conscious of "emissions (electromagnetic interference/EMI)" and "immunity (electromagnetic susceptibility/EMS)" because they operate at high voltage and large current compared to ICE vehicles. Additionally, the challenge of "how to reduce vehicle weight and extend driving range" has become a key issue, leading to a significant increase in the demand for lightweight solutions across the industry. Sekisui Techno Molding's approach involves lightweighting through the conversion from metal to resin, which also contributes to cost reduction. In cases of the same shape, this results in approximately 45% weight reduction compared to metal. While many resin products suffer from significantly reduced heat dissipation and inferior electromagnetic wave (noise) control compared to metal, Sekisui Techno Molding's resin products ensure these functionalities. - A type that balances heat dissipation and electromagnetic wave shielding - ■ Heat dissipation and electromagnetic wave shielding resin molded products - Reduction of product temperature rise through heat diffusion - Electromagnetic wave shielding performance through conductivity - Lightweighting, increased design freedom, and mass production by replacing metal products With Sekisui Techno Molding's comprehensive system, we consistently support our customers from product planning to prototype development/testing, and then to mass production and sales, ensuring they achieve their ideal products.

• plastic

Currently, metal housings/cases are mainstream for vehicle-mounted ECUs. By changing this to resin, weight reduction and cost savings can be achieved.

In-vehicle ECUs typically use metal cases made of aluminum or copper. While metal shielding ensures robustness and excellent EMC measures, it poses significant challenges in terms of weight and cost. With the electrification of vehicles, the imperative of "how to lighten the body and extend the driving range" is unavoidable, and the demand for lightweight solutions is high. Sekisui Techno Molding's approach enables weight reduction by converting from metal to resin (approximately 45% reduction for the same shape). It also allows for design freedom through resin molding and cost reduction via mass production. While many resin products are inferior to metals in terms of heat dissipation and electromagnetic wave (noise) control, Sekisui Techno Molding's resin products ensure these functions. ■ Thermally conductive resin molded products (focused on heat dissipation) - Reduction of product temperature rise through heat diffusion - Weight reduction, improved design freedom, and mass production by replacing metal products ■ Heat dissipation and electromagnetic wave shielding resin molded products (balancing heat dissipation and electromagnetic wave shielding) - Reduction of product temperature rise through heat diffusion - Electromagnetic wave shielding performance through conductivity - Weight reduction, improved design freedom, and mass production by replacing metal products With Sekisui Techno Molding's comprehensive system, we consistently support our customers from planning and prototype development/verification to mass production and sales to realize their ideals.

• plastic

The video of the heat dissipation and electromagnetic wave shielding resin molded products has been completed.

This is a PR video for Sekisui's developed products: thermal conductive resin molded products and heat dissipation/electromagnetic wave shielding resin molded products.

• plastic

Developed a resin that balances heat dissipation and electromagnetic wave shielding! Achieved approximately 45% weight reduction by converting from metal to resin.

With the electrification of automobiles, the challenge is to "lighten the body and extend the driving range," and the demand for lightweight materials is significantly increasing across the industry. Sekisui Techno Molding's approach contributes to weight reduction and cost savings by converting metal to resin. In cases of the same shape, this results in approximately 45% weight reduction compared to metal. While many resin products show a significant decrease in heat dissipation and are inferior in controlling electromagnetic waves (noise) compared to metal, Sekisui Techno Molding's resin products ensure these functions. - Heat Dissipation Focused Type - ■ Heat Conductive Resin Molded Products - Reduction of product temperature rise due to heat diffusion - Weight reduction, improved design flexibility, and mass production by replacing metal products - Heat Dissipation and Electromagnetic Wave Shielding Compatible Type - ■ Heat Dissipation and Electromagnetic Wave Shielding Resin Molded Products - Reduction of product temperature rise due to heat diffusion - Electromagnetic wave shielding performance through conductivity - Weight reduction, improved design flexibility, and mass production by replacing metal products

• plastic

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Hotron's "HA Series" is a high-function doorway monitoring sensor. Even with high doors of 4.0m, it ensures safety while proposing an open and inviting entrance through its doorway monitoring feature. 【Surface Mount Type HA-400】 ○ Safe and comfortable passage can be achieved even with high doors, from lightweight doors to large commercial facilities and office buildings. ○ Maximum installation height of 4.0m! It features a high-density area function with 60 detection spots. 【Recessed Type HA-520】 ○ With a flat finish that does not compromise the aesthetics of the building, it ensures a wide area for safe and comfortable passage. ○ Easy replacement from older models of our own, with improved sensor performance! 【Lower Surface Mount Type HA-430】 ○ With a design that minimizes protrusion and blends in, it allows for safe and comfortable passage even with high doors. ○ Detailed detection areas can be set while maintaining high density according to the site conditions. 【Ceiling Mount Type HA-260】 ○ An industry-first ceiling-mounted sensor with a flat finish using a pull-down method that does not compromise the aesthetics of the building. ○ The detection area achieves a wide coverage with high density of 72 detection spots! ◎ For more details, please contact us or download the catalog.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● What is a flow meter? Flow meters measure flow rates using mass flow meters or laminar flow meters and perform pass/fail judgments based on flow rate criteria. They are ideal for measuring airflow and conducting performance tests. "FMZ-1063 series" This is a flow tester equipped with a mass flow meter. It offers high precision of ± 3.5 % of R.D. ± 1 digit (in the normal flow range). It features a time-saving function (scan measurement). The FMZ-1063 is a compact, all-in-one flow tester with various functions. "FU series" This is a flow measurement unit that integrates laminar and differential pressure sensors, making it smaller and lighter. When connected to a display indicator (model: MI-170), it can provide direct flow readings as well as pressure and flow judgments. "FLF-110 series" This is a laminar flow meter capable of measuring a wide range of flow rates from 2 NmL/min to 500 NL/min.

What is an Air Leak Tester? An "Air Leak Tester" is a device that pressurizes the inside (or outside) of a sealed workpiece with air and determines the presence of leaks based on pressure changes. When a master with no leaks and a workpiece with leaks are pressurized, the pressure on the workpiece side decreases, creating a pressure difference between the two. By measuring this pressure difference, the presence of leaks can be determined. Generally, differential pressure air leak testing is widely used, but Fukuda also offers products that utilize direct pressure leak testing and flow meters according to the leak rate, in addition to differential pressure leak testers. Since the air leak tester uses air as the measurement medium, it incurs no running costs and is environmentally friendly.