Published in the Chemical Industry Daily (February 4, 2026).

Can be used for gas sensors, solar cells, etc.! It has high orientation and low resistance characteristics.

"Sulfurized Tin Nano Sheets" can be produced on a 2-inch substrate as a P-type semiconductor, featuring high orientation and low resistance. Tin sulfide (SnS) does not contain rare metals or harmful elements, and the elements that make up tin sulfide are abundant in nature, making it a material that is considerate of human health and the environment. The crystal color is black, and it can be used for applications such as transistors and negative electrode materials for secondary batteries. [Features] ■ Can be produced on a 2-inch substrate as a P-type semiconductor ■ Has high orientation and low resistance ■ A material that is considerate of human health and the environment *For more details, please refer to the PDF document or feel free to contact us.

• Other semiconductors
• Other polymer materials
• Organic Natural Materials

Consideration for the human body and the environment! It can be manufactured on a 2-inch substrate using P-type semiconductors, possessing high orientation and low resistance.

The material "tin sulfide" used in the "tin sulfide nanosheet" does not contain harmful substances, and the elements that make it up are found in nature, making it considerate of human health and the environment. It can be manufactured on a 2-inch substrate as a P-type semiconductor, featuring high orientation and low resistivity. Sample provision, orientation, film thickness, and crystal color can be adjusted. 【Example of Sheet Characteristics (Partial)】 ■ Type: P-type ■ Crystal Color: Gray ■ Film Thickness: 400-600nm ■ Orientation: 010 ■ Resistivity: 10-20Ωcm *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials
• Organic Natural Materials

Top-Class Volume-Specific Capacity: High-Capacity Anode Materials for Secondary Batteries

When using tin sulfide as the negative electrode material for lithium-ion batteries, the theoretical capacity of tin sulfide is 4.7 times that of graphite by volume and 2.1 times that of graphite by mass. In terms of actual discharge capacity by volume, our tin sulfide is a high-capacity negative electrode material on par with silicon-based negative electrode materials. It has also been reported to excel in fast charge and discharge performance. Additionally, since the elements that make up tin sulfide are sulfur and tin, which are abundant in nature, cost reduction during mass production is expected. This tin sulfide powder is a uniform mixture created by adding acetylene black, a conductive additive, to our developed tin sulfide dispersion with excellent dispersibility. Furthermore, changes in particle size, type of additives, and amount of additives can also be considered for this tin sulfide powder. Please feel free to contact us!

• Other metal materials

《トップクラスの体積当たり容量》 二次電池負極向け高容量負極材料

当社は本硫化スズの微細化プロセスを新たに開発することにより、高い分散性を持った硫化スズ粒子の開発に成功しました。水を溶媒として用いた5wt%硫化スズ分散液を例にあげると、流体力学的直径は256.8nmのナノ粒子を有し、透過率は0.04%、ゼータ電位－44mVと高い分散性を示しています。17時間の沈殿テストにおいても、流体力学的直径1086.6nmを有する5wt%硫化スズ分散液の比較例が17時間後沈殿しているのに対し、本5wt%硫化スズ分散液は17時間後も分散状態を維持することが実証されました。 主な使用用途としては二次電池の負極材を想定しています。硫化スズをLIBの負極に使用した場合、硫化スズの理論容量は体積あたりで黒鉛の4.7倍、質量あたりで黒鉛の2.1倍となります。体積あたりの実放電容量においては、当社の硫化スズはシリコン系負極材に並ぶ高容量負極材です。かつ、高速充放電性能に優れていることも報告されています。また、硫化スズを構成する元素は硫黄と錫であることから自然界に豊富に存在し、量産時のコストダウンが期待されます。お気軽にお問合せ下さい！

• Other metal materials

Graphs and photos are published according to film thickness! We also introduce the resistivity of each.

This document introduces a case study of the deposition of SnS ultra-thin films (soda glass substrate, 50mm square). Graphs and photos of various film thicknesses, including 145nm, 88nm, 51nm, 37nm, and 30nm, are included. We also present the resistivity for each thickness, so please feel free to download and take a look. [Published Cases] (1) Film thickness 145nm (2) Film thickness 88nm (3) Film thickness 51nm (4) Film thickness 37nm (5) Film thickness 30nm *For more details, please refer to the PDF document or feel free to contact us.

• Other semiconductors
• Other polymer materials
• Organic Natural Materials

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

Are you struggling to explain "safety" to the client using just drawings? - The risks in blind spots are difficult to convey to the client through drawings alone. - Safety measures often become a target for cost reduction, making it hard to communicate their necessity. - There is a concern that the client might say, "It's more dangerous than I thought," after completion. Risks that are visible to design professionals are not easily understood intuitively by clients who are outside the field. This document is not just a simple explanation of sensor functions; it is a guide to visually explain "why sensors are necessary in that location." It can be used directly as explanatory material for the client. Here are three key points for utilizing this document: 1. Visualization of Risks Blind spots during vehicle departure and contact risks within the site are illustrated clearly. 2. Clarification of Selection Criteria A comparison table outlines the differences between complex sensor types such as infrared, ultrasonic, and loop coils. 3. Diagram of System Configuration It illustrates not just the sensors alone, but how they combine with components like rotating lights and control panels, providing practical assistance for electrical equipment design. Please make use of this to prevent "rework after completion" and "accident risks."

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.