[Exhibition] 4/22 to 4/24 "Sea Japan 2026" Exhibition Information

Fuji Kin's technological capabilities support the unknown high-pressure areas required for hydrogen stations.

This is a valve for hydrogen gas and liquid hydrogen. ■ Ultra-high pressure hydrogen gas compatible valve equipment A lineup of valve equipment for the near-future hydrogen society! - Control valves, shut-off valves, needle valves - Check valves, filters - Metal gasket fittings, welded fittings, cone & thread fittings ■ Ultra-high pressure liquid hydrogen gas compatible valve equipment This product is essential equipment for hydrogen stations. Based on accumulated technology, we have developed valve equipment that incorporates new technology to meet the needs for improving the filling capacity of hydrogen stations. <Features> Durability: 99.9 MPa Cryogenic compatibility: -253 to +50℃ 【Approximately 50 times compared to conventional】 High flow rate: Cv value 1 【Approximately 10 times compared to conventional】 Valve size: Overall height of the valve is about 50% less than conventional.

• Hydrogen battery
• valve
• Pipe Fittings

A "high flow type" valve for ultra-high pressure hydrogen gas has arrived!

To realize a hydrogen society, it is necessary to circulate a large amount of hydrogen. Fujikin has developed a lineup of products capable of handling large flow rates, such as shut-off valves, manual valves, check valves, and filters, in response to the spread of FCVs and the establishment of hydrogen stations overseas.

• valve

The <New V-Series> is a tube connector with excellent performance and quality.

<Features> The new V-Lok tube connector allows for connection simply by inserting the tube and tightening the nut, eliminating the need for special tools or open flames. Additionally, due to the unique interlocking action of the double ring, the ring effectively undergoes plastic deformation to compress the tube securely, resulting in very high pressure resistance.

• Pipe Fittings

<New V-Series> A 3-piece ball valve born from a new concept.

<Features> 1. 3-piece structure suitable for high flow rates 2. Can be opened and closed with a 1/4 turn of the handle 3. Connection types: V-Lok type, Rc, NPT male threads 4. Available in manual valve and automatic valve (single acting, double acting)

• valve

<New V-Series> A trunnion-type ball valve born from a new concept.

<Features> 1. Compact design that accommodates high flow rates. 2. Operable with low torque. 3. Flow patterns: 2-way type, 3-way type. 4. Can be panel-mounted.

• valve

<New V-Series> A plug valve born from a new concept.

<Features> 1. Simple and compact design. 2. Operable with low torque. 3. Full open and close operation with a 1/4 turn.

• valve

<New V-Series> A relief valve born from a new concept.

<Features> 1. Maximum operating pressure 41.3MPa 2. Can be set to the desired pressure using 8 types of springs. (Nominal diameter 6.35) 3. Can be set to the desired pressure using 3 types of springs. (Nominal diameter 12.7)

• valve

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

Creating 3D Plots Using Igor Pro ~3D Scatter Plots and Surface Plots~ This document introduces how to create a 3D scatter plot from a point cloud data given in XYZ coordinates using Igor Pro, as well as how to create a surface plot using the same data. 1. Overview of 3D Plots 2. Operation Demo: Creating a Scatter Plot 3. Operation Demo: Creating a Surface Plot

Sekisui Filler Co., Ltd. will exhibit at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Automotive Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coatings - Optical adhesives We sincerely look forward to your visit.

[Instructor] Hiroto Hayashi, Attorney at Law, New York State, Mori Hamada & Matsumoto Law Firm, Foreign Law Joint Enterprise [Key Lecture Content] Recently, batteries are expected to serve as a balancing power source for the realization of renewable energy as a primary power source. Due to changes in the business environment brought about by market development and government support measures, opportunities in the battery business are expanding. For grid-connected batteries, there are multiple options for long-term decarbonization power source auctions, tolling models, and merchant models, and the points of project development vary depending on the offtake method. Additionally, with the spread of the FIP system, the installation of batteries alongside renewable energy generation facilities is also progressing. In this lecture, we will explain the systems related to batteries, as well as key points for contract creation and negotiation, and financing necessary to steadily advance projects. We will also outline the challenges and prospects for project development and project finance formation according to each offtake scheme.

[Lecturer] Hideo Yamada, Ph.D. Honorary Professor, Waseda University Visiting Professor, Business Breakthrough University Graduate School [Key Lecture Content] Companies face various trade-offs (dilemmas) such as quality vs. cost, inventory levels vs. service levels, and standardization vs. differentiation. Traditionally, companies have responded to trade-offs by (1) finding a balance or (2) prioritizing one over the other. However, this does not lead to fundamental solutions. In this lecture, I will propose a third method that is neither balancing nor prioritizing. Using case studies from over 50 Japanese companies, I will explain it in an easy-to-understand manner. If we can turn long-standing trade-offs into trade-ons (coexistence), business opportunities will arise. [Lecture Topics] 1. What is a trade-off? 2. Trade-offs between customers and companies 3. Trade-offs within companies 4. Trade-offs within customers 5. How to turn trade-offs into trade-ons 6. Steps for exploration 7. Q&A / Business card exchange