We have started selling 4 types and 7 models of the vacuum mounter "High-Performance Dicing Peripheral Equipment."

A versatile model capable of supporting a wide range of processes from research and development applications to pre-mass production stages.

The "TV-150/TV-200/TV-300" is a standard type of vacuum mount that attaches wafers to dicing tape in a vacuum environment. By performing the attachment process inside a vacuum chamber, it suppresses the retention of air bubbles, which can be problematic in atmospheric attachment, and achieves uniform and highly reproducible attachment quality across the entire wafer surface. It is a compact, versatile model that can accommodate a wide range of processes. TV-150: 150mm (6 inches) TV-200: 200mm (8 inches) TV-300: 300mm (12 inches)

• Wafer processing/polishing equipment
• Other semiconductor manufacturing equipment
• Mounter

A model suitable for processes where temperature conditions affect adhesion quality and for applications where process variation needs to be minimized.

The "TV-200H/TV-300H" is a heated vacuum mount that combines a vacuum adhesion method with a heating function. By heating the adhesion stage, it stabilizes the properties of the adhesive tape, and through the synergistic effect with vacuum adhesion, it achieves a more uniform and reproducible mounting quality. This model is suitable for processes where temperature conditions affect adhesion quality and for applications where process variation needs to be minimized. 【Supported Wafer Sizes】 TV-200H: 200mm (8 inches) TV-300H: 300mm (12 inches)

• Wafer processing/polishing equipment
• Other semiconductor manufacturing equipment
• Mounter

TAIKO(R) wafer and thin wafer compatible models

The "TV-200T" is a vacuum mount designed to accommodate wafers with step or special shapes on the outer edge, such as TAIKO(R) wafers and thin wafers. By adopting a bonding method using a top membrane, it achieves "radial bonding," which uniformly applies tape from the center of the wafer outward. This helps to suppress stress concentration and uneven bonding on the outer edge specific to TAIKO(R) wafers, providing stable mounting quality. 【Compatible Wafer Size】 TV-200T: 200mm (8 inches) *TAIKO(R) is a registered trademark of Disco Corporation in Japan and other countries.

• Wafer processing/polishing equipment
• Other semiconductor manufacturing equipment
• Mounter

A model that combines a membrane attachment method compatible with TAIKO(R) wafers and a heating function.

The "TV-200TH" is a vacuum mount that combines a membrane bonding method compatible with TAIKO(R) wafers and a heating function. By applying radial bonding in a vacuum environment, it suppresses stress concentration on the unique outer edge steps and thin sections of TAIKO(R) wafers, and by stabilizing the properties of the adhesive tape with a heated chuck, it achieves high bonding uniformity and reproducibility. This is the top model designed for processes with high difficulty, such as thin wafers and high-value-added devices. 【Compatible wafer size】 TV-200TH: 200mm (8 inches) *TAIKO(R) is a registered trademark of Disco Corporation in Japan and other countries.

• Wafer processing/polishing equipment
• Other semiconductor manufacturing equipment
• Mounter

On November 6th (Thursday) to 7th (Friday), 2025, we held the "Human Body Day 2025" at the NAC Image Technology Akasaka Multi-Purpose Space. We have uploaded videos of the highlights from each company and the presentations that took place on the day to our website. We encourage you to take a look. ---[Report on Human Body Day 2025 is here]------------------- https://info.nacinc.jp/jintaiday2025-report ------------------------------------------------------------------------- On the day of the event, participants were able to experience a wide range of products in a hands-on session format, including motion capture, force plates, eye tracking, and human body analysis software. We received numerous comments from attendees expressing high satisfaction, saying, "It was great to gain various information all at once," which makes us very happy. NAC Image Technology will continue to provide "valuable products to our customers." We hope you will join us for our next event as well.

The date for the "Tokai Area Electrical and Electronic WEB Technology Seminar" for the 2026 fiscal year has been decided. Registration has started, so if you are interested, please apply. Multiple participants from one company are allowed, so please make use of this opportunity to acquire basic knowledge. 【April】Basic Knowledge of Resistors 【May】Technical Course on Capacitors 【June】Basics of Motors and How to Choose the Optimal Driver 【July】Fundamentals of IC Socket and Connector Selection 【September】Basics of Magnets 【October】Failure Phenomena of Chip Resistors and Their Countermeasures 【November】Temperature Protection Design Using Thermal Fuses

NDT Mart & Rental Co., Ltd. began selling its new product, the handheld magnet "YokeLite-100V," on December 25, 2025. ◆ Handheld Magnet "YokeLite-100V" The YokeLite-100V is an AC handheld magnet (gap-type magnetizer) used for magnetic particle testing (MT). With a compact design weighing approximately 2.4 kg, it is easy to handle and allows for efficient non-destructive testing work on-site. It generates a powerful alternating magnetic field, supporting the detection of defects such as cracks in welds and on metal surfaces. It features a variable yoke structure, enabling flexible adaptation to various inspection targets, including curved surfaces, corners, and fillet welds. It ensures a lifting power of over 4.5 kg, providing sufficient magnetization capability required for magnetic particle testing. Additionally, by equipping optional UV lights or white lights, it can accommodate a wide range of inspection methods, including fluorescent magnetic particle testing and visual inspections, offering excellent cost performance. This handheld magnet is useful for defect inspection and quality control in the fields of manufacturing, plant equipment, and welding inspection. It combines lightweight design with high inspection performance, contributing to improved work efficiency.

NDT Mart & Rental Co., Ltd. began selling its new electromagnetic ultrasonic thickness gauge, 'EMAT WIFI', on January 19, 2026. ◆ Electromagnetic Ultrasonic Thickness Gauge 'EMAT WIFI' The 'EMAT WIFI' is a thickness gauge that uses the electromagnetic ultrasonic (EMAT) method, which does not require a couplant (contact medium). Unlike conventional ultrasonic thickness gauges (UT), there is no need to apply a couplant; thickness measurements can be taken simply by placing the probe on the measurement target, making it ideal for beginners and screening in large-scale sites. It can measure materials with paint, scale, thick linings, and slight surface roughness, significantly reducing the hassle of pre-treatment. Additionally, it is equipped with WiFi communication capabilities, allowing for the confirmation and management of measurement data and waveforms in conjunction with smartphones and tablets. This facilitates smooth sharing of measurement results and data management on-site. It is optimal for measuring wall thickness and conducting corrosion inspections of plant equipment, piping, tanks, and steel structures. It contributes to the efficiency and reliability of thickness measurements in the field of non-destructive testing (NDT), such as maintenance inspections and equipment diagnostics.

NDT Mart & Rental Co., Ltd. began sales of its new dual thickness gauge, the 'CT3500', on January 28, 2026. ◆ Dual Thickness Gauge 'CT3500' The 'CT3500' is a portable thickness gauge that supports a wide range of coating measurements from thin films to thick films. It employs a dual measurement method using electromagnetic and eddy current techniques, allowing for automatic differentiation between ferrous and non-ferrous substrates to measure coating thickness. The measurement range accommodates up to 3,500μm, making it suitable for measuring coatings from general painting to heavy anti-corrosion coatings and linings. With a measurement speed of approximately 0.2 seconds, it allows for efficient measurements even in inspection tasks that require multiple points. It is not only compact and easy to carry, but its display features an inclined design that is easy to see from both above and the front. Additionally, the upside-down display and background color (white/black) switching enhance visibility in dark, narrow, and outdoor environments, making it suitable for quality control within factories as well as for equipment inspections and painting checks in outdoor settings. It can be utilized for a wide range of applications, including painting management of bridges and steel structures, anti-corrosion coating measurements for pipes and tanks, and quality control in manufacturing sites. The 'CT3500' is a high-performance portable thickness gauge that provides stable measurements from thin to thick films, designed for field use.