Exhibiting at FOOMA JAPAN 2026 (Food Machinery Exhibition)!

All pins and discs rotate! Centrifugal force acts, allowing even adhesive and cohesive materials to be finely ground without sticking.

The "EM-1A" is a dual-side disc rotation type exceed mill. The raw materials supplied in a measured amount from the feed inlet are introduced to the crushing section from the center of the rotating main body disc. They are crushed by the impact of 346 pins attached to the main body and door side discs, which rotate at high speeds in opposite directions, and are discharged from the lower outlet. The clearance between the pin tips and the disc is maintained at a minimal level, and the relative rotation of the two discs generates a powerful impact force due to the combined peripheral speed of the material disc, enabling fine grinding. 【Standard Specifications (Partial)】 ■ Rotational Speed - Door Side: Up to 12,000 rpm (Variable Speed) - Main Body Side: Up to 8,000 rpm (Variable Speed) ■ Required Power - Door Side: 3.7 kW + Inverter - Main Body Side: 3.7 kW + Inverter *For more details, please download the PDF or feel free to contact us.

• Crusher
• Fine grinding machine

Low wear and high durability crusher. Multi-purpose, high performance, and low price with over 10,000 units sold.

The "Makino Type Crusher DD Series" features a directly connected rotating plate that reduces transmission loss, while also achieving cost reduction through simplified structure. The attached blades on the rotating plate are hardened, making them resistant to wear and providing excellent durability. Additionally, the shape of the blades has been modified from previous models to achieve further fine grinding. It is compatible with various raw materials such as ores, resins, gypsum, glass, and grains. 【Features】*For details, please refer to the catalog. ■ Achieved approximately 30% cost reduction (compared to our company) through structural simplification ■ No maintenance required for belt adjustments due to direct motor connection ■ Special cast steel used for blades extends the lifespan of consumables ■ Capacity increase is possible with only motor replacement ■ Consideration of blade arrangement reduces noise and airflow generation ■ Changing the rotation speed is easy with an inverter ◎ For more information, please refer to the PDF materials or feel free to contact us.

• Crusher
• Crusher/Mill

Direct connection pin-type crusher without a screen

The High-Speed Pin Mill Exceed Mill EM-2 is a grinding machine that can achieve fine grinding without the use of a screen, as it crushes with numerous pins. It produces finely powdered materials in a short time. It is a highly efficient and compact grinding machine with a direct motor connection. By adopting a direct motor connection for the pin mill, energy loss has been significantly reduced, improving grinding efficiency. With fewer components, the running costs and maintenance requirements have been greatly improved.

• Other food machinery

Just set up the commercially available stainless steel container! It enables soft mixing and three-dimensional mixing and stirring.

The pot blender (swing type) is a small-scale mixing machine that uses commercially available stainless steel tanks. It is ideal for mixing tasks that require frequent product changes, as the containers are easy to remove and replace. Cleaning is straightforward, and since it uses standard stainless steel containers, there is no need to transfer the mixture after blending. The entire container rotates slowly, allowing for gentle mixing. The mixing time can be easily set, enabling mixing tailored to the raw materials. 【Features】 - Addresses safety concerns and physical strain associated with manual labor - Mixing parts use commercially available stainless steel containers - Easy to set up for mixing tasks as it can be used as is - Simple container removal - Gentle mixing allows for soft materials to be blended - Simple structure makes maintenance easy *For more details, please refer to the catalog.

• Other powder equipment

Crush powerfully with a small motor! Ideal for coarse crushing in a wide range of applications from ores to food and chemicals.

The "Hammer Crusher" is a coarse crusher that powerfully crushes large raw materials. The hammer pins attached to the rotor stand upright due to the centrifugal force of high-speed rotation, and the tips of the hammers deliver a significant impact force at maximum peripheral speed, crushing lump, sheet, and granular raw materials to about a few millimeters. When the hammer strikes hard or difficult-to-crack materials, it swings and repeatedly delivers impacts, allowing for a large crushing capacity with a small motor compared to crushing all at once with fixed hammers. The product particle size is determined by the rotation speed of the hammers and the hole diameter of the attached screen.

• Other processing machines
• Crusher
• Crusher

We are pleased to announce the upcoming webinar "Analytical Instruments Course - Basic Edition." This course is designed for anyone who will be involved in analytical work starting this spring, as well as those who wish to revisit the principles of analytical methods. This time, we will explain sulfur, nitrogen, and chlorine analysis instruments, as well as total organic carbon analysis instruments. If you are interested, please register for participation through the details and registration button. Start times: 14:00 - Nitrogen, Sulfur, and Chlorine Analysis Instruments 15:00 - Total Organic Carbon Analysis Instruments

We are pleased to announce the upcoming webinar "Analytical Instrument Course - Basics Edition." This course is designed for anyone who will be involved in analytical work starting this spring, as well as those who wish to revisit the principles of analytical methods. We believe that everyone will find the content satisfying. If you are interested, please register for participation using the application button. This time, the program will be held as follows: 1:00 PM - Microwave Sample Digestion System 2:00 PM - Atomic Absorption Spectrophotometer 3:00 PM - ICP Emission Spectrometer

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely invite you to visit us during this busy time. 【 Exhibition Name 】 Automotive Technology Exhibition 2025 YOKOHAMA https://aee.expo-info.jsae.or.jp/ja/yokohama/ (An "online exhibition" will also be held during and around the event period) 【 Dates 】 May 21 (Wednesday) - 23 (Friday), 2024 10:00 AM - 6:00 PM *On the final day, 9:00 AM - 4:00 PM (Online exhibition: May 14 (Wednesday) - June 4 (Wednesday)) 【 Venue 】 Pacifico Yokohama (1-1-1 Minatomirai, Nishi-ku, Yokohama, Kanagawa Prefecture) Our booth number: "Concourse 505"

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 27th INTERPHEX Week Tokyo https://www.interphex.jp/tokyo/ja-jp.html 【 Dates 】 July 9 (Wednesday) - 11 (Friday), 2025 10:00 AM - 5:00 PM 【 Venue 】 Tokyo Big Sight (3-11-1 Ariake, Koto-ku, Tokyo 135-0063)

The next official Yocto Project practical course (LFD461-JP) is scheduled to be held over three days from June 9 (Tuesday) to June 11 (Thursday), 2026. This practical course integrates the knowledge and know-how gained from Yocto-related development, support, and seminars conducted by Lino. We encourage companies that want to learn Yocto or utilize it more effectively to consider participating.