MEDTEC JAPAN 2026

Widely applicable for research and development, prototyping, etc. Compact and simple basic model.

【New Model Released from the X-801 Series】 A compact and simple basic model that can be widely used for research and development, prototyping, and more. Redesigned internal and external structures to improve molding accuracy and stability. Standard equipped with a clamp-type fastening mechanism with a width of 56mm that makes repeated molding "easy with 3 simple steps." A 2-way mold installation mechanism that can be easily swapped with simple tools for various molds. Height (up and down) adjustment function for the injection nozzle, allowing for adaptability to various scenes through handle operation.

• Injection Molding Machine

Test specimens can be made from a wide range of resins, from general-purpose resins to super engineering plastics.

By utilizing the clamp-type closing mechanism, repeated molding is "Easy 3 Steps." By using the included clamp-type closing mechanism, Step 1: Set the mold → Step 2: Injection operation (up/down switch + injection button) → Step 3: Remove the mold. With these 3 simple steps, repeated molding can be easily achieved. Universities, public research institutions, and resin manufacturers are also making use of this. Each sample can be viewed in the showroom. For more details, please refer to the catalog and website. Related link - https://www.centinno.co.jp/

• Injection Molding Machine

"Faster," "at a lower cost," "flexible" rapid prototyping, agile development.

In a changing market environment, we assist in transforming traditional development processes and realizing the "faster" and "more experimentation" needs of development sites through high-quality "rapid prototyping" and "agile development." Even during the prototyping phase, we achieve high transferability, warpage-free, sink mark-free, and void-free molding by utilizing the characteristics of small injection molding machine mold locks. 1. Shortened prototyping cycle - Reduced production time for various molds due to miniaturization of molds. 2. Prototyping completed in-house - Enables mold creation in-house by utilizing resin molds and aluminum molds with 3D printers and 3D translators. - Allows for control of prototyping in-house. 3. Reduced development costs - Uses 100V power supply, no water cooling required, energy-saving, space-saving, and CO2 reduction. - Reduction of resin waste.

• Injection Molding Machine

Just-in-time automatic molding in the production site.

We will mass-produce resin parts with high in-house production needs in the necessary quantities near the production line. Due to its compact size, it can be installed near the production line or in corners of the factory without significantly altering the production line. 1. Just-in-time automatic molding near the production line 2. Integrated automatic molding within the production line 3. Automatic molding in available spaces within the company or factory For information about the "High-Precision In-Line Molding Automation System," which consists of high-precision molds, robotic arms, and mold locks, please refer to the catalog and website. Related link - https://www.centinno.co.jp/

• Injection Molding Machine

Even with engineering plastics and super engineering plastics, accurate functional evaluation can be achieved because prototypes can be made with the same resin and the same shape.

We can accommodate various thermoplastic resins, including general-purpose resins, engineering plastics, super engineering plastics, biodegradable resins, and recycled resins, allowing for prototypes to be made with the same resin as mass-produced items. Not only can we evaluate appearance, but we can also conduct accurate functional assessments regarding safety, durability, and operability, which enables a reduction in evaluation time. Additionally, we can verify the environmental impact and recyclability. For more details on the resins we support, please refer to our catalog and website. Related link - https://www.centinno.co.jp/

• Injection Molding Machine

On Tuesday, April 21, at Iidabashi, paperlogic will have a booth at "Canon Selection 2026." The theme of this event is "Paper Output × Data Utilization." It is a comprehensive exhibition filled with hints to promote DX in the office and achieve operational efficiency. At the venue, there will be the latest "Security Measures Seminar" to protect companies from supply chain attacks, as well as programs like creating promotional flyers that anyone can make, "Super Easy! PDF Utilization Techniques" to alleviate daily frustrations, and "Paperless Fax Experience" to support remote work, all aimed at solving on-site challenges. From paperlogic, we will introduce the 【paperlogic Electronic Contract】 as a solution for "Document Management and Back Office Digitization." We will have actual operation demonstrations at our booth and will directly address your concerns regarding document management. We also have special plans exclusively for Otsuka Corporation, so please come and visit us.

We will be holding a technical training session for MilkoScanFT3 as detailed below. In this training, we will provide a broad range of information useful for operating the equipment, including explanations of the principles and structure of the device, how to create measurement products, daily maintenance, and responses to troubleshooting. Additionally, this year we will introduce new ways to utilize digital services (such as FossCalibrator and IQX), and we have also prepared hands-on sessions where customers can experience operating the equipment using a PC. The training content is designed to be more practical and immediately applicable in real-world settings. We understand you may be busy, but we kindly ask you to consider participating. ■ Osaka Venue: June 25-26 ■ Morioka Venue: July 8-9 ■ Tokyo Venue: August 27-28 ■ Obihiro Venue: September 17-18 ■ Fukuoka Venue: October 8-9 *Please check the PDF for more details.

■Connecting Biomarker Discovery to Clinical Application - Explained with Real Cases of Neurodegenerative Diseases Although biomarkers are discovered, many do not reach clinical application. The reasons for this lie in multiple hurdles that arise after discovery, such as "narrowing down candidates," "reproducibility," and "connecting to clinical practice." 1. How should promising candidates obtained from comprehensive exploration be narrowed down? 2. How can reproducibility and scalability be ensured? 3. What are the key points for smoothly transitioning to clinical research? 4. What should be considered in data science throughout the overall flow? In this online seminar, we will clearly explain specific strategies for advancing from discovery to clinical application based on actual research cases of Alzheimer's disease and multiple sclerosis, in an easy-to-understand manner in Japanese. *Olink products and services are for research purposes only. Please note that they cannot be used for diagnostic purposes.

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely invite you to visit us during this busy time. 【 Exhibition Name 】 Automotive Technology Exhibition 2025 YOKOHAMA https://aee.expo-info.jsae.or.jp/ja/yokohama/ (An "online exhibition" will also be held during and around the event period) 【 Dates 】 May 21 (Wednesday) - 23 (Friday), 2024 10:00 AM - 6:00 PM *On the final day, 9:00 AM - 4:00 PM (Online exhibition: May 14 (Wednesday) - June 4 (Wednesday)) 【 Venue 】 Pacifico Yokohama (1-1-1 Minatomirai, Nishi-ku, Yokohama, Kanagawa Prefecture) Our booth number: "Concourse 505"

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 27th INTERPHEX Week Tokyo https://www.interphex.jp/tokyo/ja-jp.html 【 Dates 】 July 9 (Wednesday) - 11 (Friday), 2025 10:00 AM - 5:00 PM 【 Venue 】 Tokyo Big Sight (3-11-1 Ariake, Koto-ku, Tokyo 135-0063)