[Exhibition] May 20 - May 22 "28th Interphex Japan" Exhibition Information

It is a valve that can minimize the switching time between batches.

When replacing the tube or changing the size of the tube, there is no need to purchase a new valve as long as it is within normal operating conditions; the compressor can be easily adjusted with just a simple replacement of the tube holder.

• valve

The change in volume is small, and the discharge flow rate is stable.

<Features> 1. Compact with minimal liquid pooling 2. Small volume change in fluid pathways, resulting in good liquid drainage 3. Suitable for small volume filling 4. Actuator can be removed with four bolts

• valve

It is a valve with excellent "air tightness" and "maintainability."

A diaphragm valve that controls fluid by lifting the diaphragm at the drive part or pressing it against the valve seat, features excellent sealing properties due to the elasticity of the diaphragm. Additionally, it has no pockets in the fluid passage and is streamlined, allowing for easy maintenance by simply removing the bolts and nuts that secure the body and drive part to replace the diaphragm. This diaphragm valve is widely used in various fields requiring sanitary conditions, such as pharmaceuticals, food, and chemicals.

• valve

This is a diaphragm valve that achieves weight reduction through special processing.

<Features> 1. The flow path is straight. 2. There is no gland for shaft sealing. 3. It can be disassembled and assembled while the body is still piped. 4. Buff polishing is not used for the inner surface finish of the body. 5. Lightweight due to special processing of stainless steel.

• valve

This is a valve suitable for fluids that dislike dead space, with low pressure loss.

<Features> ● Higher durability in steam than ball valves ● Achieves smooth fluid flow ● Grand structure based on know-how in high-temperature and high-pressure valve manufacturing ● Stable seat performance achieved with crimped disk packing

• Other work tools

Outstanding airtightness and significantly reduced maintenance frequency!

<Features> 1. The unique seal structure improves reliability against external leakage compared to conventional diaphragm valves. 2. Maximum operating pressure of 1MPa (However, the seat closing pressure under pressure on both sides is 0.6MPa). 3. Reduces flow variation. 4. Uses diaphragms that comply with USP Class 6 and FDA standards.

• valve

Our company will be exhibiting at the "JECA FAIR 2026 - 74th Electrical Construction Industry Exhibition" held at Tokyo Big Sight from May 27 (Wednesday) to May 29 (Friday), 2026. At this exhibition, we will introduce products such as the coreless current sensor (for reference), the "PAL-Plus typeE / PAL-Plus typeE2" suitable for simple electric power measurement in factories and facilities, and the management software "CEW-M4" that visualizes and manages power consumption and surplus capacity of equipment. 【Main Exhibited Products】 - Wire-wound coreless current sensor (for reference) - PAL-Plus typeE / PAL-Plus typeE2 - CEW-M4 Please take a look at our solutions that are easy to implement even in confined spaces or where power outage work is to be avoided, and that help solve on-site challenges. We sincerely look forward to your visit.

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

Date: October 16 (Wednesday) to 18 (Friday), 2024, 10:00 AM to 5:00 PM Admission Fee: 1,000 yen (free admission with pre-registration) Location: Marine Messe Fukuoka, Hall A and Hall B Exhibit Booth Number: AS-41 Details: https://www.nikkanseibu-eve.com/mono/

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

[Speaker] KPMG Consulting Co., Ltd. Sports Innovation Associate Partner Ryo Saki Sports Innovation Manager Yota Tsumura [Presentation Items] 1. Introduction to KPMG Consulting - Support stance and strengths in the fields of sports, urban development, and public-private partnerships 2. Understanding the Background and Current Situation Why the expansion of the sports market becomes a "business opportunity" 3. What Urban Development Centered on Sports Means Value creation starting from stadiums and arenas (sports complexes) Implementation of sports and open innovation 4. Organizing Discussion Points to Consider Participation Opportunities - Where can our business and assets be utilized? - Issues and decision-making points faced by business leaders - Learning from success and failure factors in advanced domestic and international cases - Organizing actions to start discussions from tomorrow 5. Closing - The potential of sports - The value/WILL that KPMG Consulting can provide 6. Q&A / Business Card Exchange