◆Yoshida SKT Co., Ltd.◆ Thank you for your visit!!

Yoshida SKT helps create new value through surface treatment technology.

Yoshida SKT is a company that has been leading innovations in fluoropolymer processing technology for over half a century. Starting with the licensing agreement with DuPont in the United States in 1968, we have focused on the introduction and development of fluoropolymer coating technologies, including Teflon(TM). Our technological capabilities extend beyond Teflon fluoropolymer coatings and have led to the development of a variety of coating technologies. 【Key Surface Treatment Technologies】 Teflon Fluoropolymer Coating Features non-stick properties, chemical resistance, heat resistance, and cold resistance, making it suitable for a wide range of applications. MY Lining(R) A permeation-resistant PFA lining, ideal for handling chemical substances. SafeLON(R) A fluoropolymer coating with anti-static properties that enhances safety. Non-Stick Coating Series A series of coatings specifically designed to address sticky substances. BICOAT(R) An organic-inorganic composite coating system boasting ultra-durability. NanoProcess(R) A precision thin-film coating process that meets cutting-edge technological demands. From extensive material selection to the provision of test pieces, Yoshida SKT offers meticulous support tailored to the specific needs of each customer.

• Surface treatment contract service

We will introduce Yoshida SKT in a video of about 2 minutes. Please take a look.

Yoshida SKT began fluororesin processing in 1963. In 1968, it signed a licensing agreement with DuPont in the United States. For half a century since then, we have pursued surface treatment functions, starting with Teflon™ fluororesin coatings. In response to customer needs, we have also developed numerous original coatings. At Yoshida SKT, we can accommodate a wide variety of substrates and offer proposals from hundreds of types of coating materials. This expands the range of coatings that customers can choose from. In addition to functions such as "reducing adhesion of sticky substances" and "improving slip," we respond meticulously to the diverse needs and environments of our customers, such as "requiring precision" or "requiring heat resistance," to achieve reliable effects. We also provide test pieces that can be tried on-site for support. For cost reduction in manufacturing, strengthening competitiveness, and creating a welcoming environment on-site, please feel free to consult with us first.

• Surface treatment contract service

Non-stick, water-repellent, and excellent slip properties, with high heat resistance - 'Teflon coating'

■ "Teflon Coating" refers to a surface treatment technology that involves baking a special Teflon fluoropolymer resin, which excels in non-stick, water-repellent, slippery, heat-resistant, and weather-resistant properties, onto the surface of a substrate through a unique process. 【Features of Teflon Coating】 - Non-stick - Friction (slippery) - Water and oil repellency - Chemical resistance - Heat and cold resistance - Electrical properties 【Yoshida SKT's Teflon Coating】 ■ We provide coating technology that maximizes the properties of Teflon coating according to the customer's objectives. ■ If you are looking to prevent adhesion on surfaces of substrates such as metals, plastics, and rubber, or to improve slippery properties and chemical resistance, please consult Yoshida SKT. ■ Whether for mass-produced items or a single part of a machine unique to a factory, we will propose processing tailored to the application and usage environment. ■ We can process everything from precision parts to tanks with a depth of 6 meters at our three domestic factories across the country. ■ We offer coatings that maximize functions such as non-stick, slippery, corrosion resistance, wear resistance, water repellency, and electrical properties according to the customer's objectives. *For more details, please visit our website or feel free to contact us.

• Surface treatment contract service

A fluorine coating with excellent release properties that hardly sticks to duct tape! It solves problems in food transport lines and resin film manufacturing lines.

The "Super TP" release coating system improves the "release ease" of adhered materials through a technology that roughens the coating surface to a convex shape, thereby reducing the contact area. This achieves a level of non-stickiness that cannot be obtained with conventional Teflon or fluoropolymer coatings. It demonstrates remarkable release properties (anti-adhesion) even with highly adhesive substances such as unvulcanized rubber, adhesive tape, and hot melt adhesives. If you have been struggling with transportation issues or molding defects caused by adhesive materials, or if you need to reduce maintenance on molds, transport chutes, or rolls, please feel free to consult us. ■ Features - Non-stickiness and release properties that surpass fluoropolymer coatings - Anti-adhesion to adhesive materials like molten resins and adhesive tapes - Slip and lubrication properties through a special technology that roughens the coating surface - Compatible with silicone-free requirements (TP series, Super TP series) - Smooth release - Slippery (lubrication) (TP series) *For more details, please refer to the catalog or contact us directly.

• Coating Agent

Wear-resistant and noise-reducing! Can be processed at room temperature. All coatings are room temperature curing types and can be processed on chemical wood and plastic as well.

"Urethane coating" is a room temperature curing type of coating material that excels in abrasion resistance and soundproofing, and can be processed onto any material except for liquids and gases. The usable temperature range is -30°C to 100°C, and depending on the grade, there are types suitable for surface treatment of equipment for transporting food, medical products, and electronic components, as well as types that enhance slip performance and include static electricity countermeasures. Additionally, if you require a specific color, we are open to consultation. [Features] ■ Excellent abrasion resistance and soundproofing ■ Can be applied in various locations ■ Protects materials and equipment through coating ■ Cures at room temperature, making it suitable for various materials *For more details, please refer to the PDF document or feel free to contact us.

• Coating Agent

Prevents "charging" of fluororesin coatings and reduces static electricity troubles! Also reduces adhesion caused by static electricity.

"Safron(R)" is an antistatic fluororesin coating that enables static electricity elimination by allowing charges generated on the coated surface to flow to the base metal or ground. It reduces static electricity problems caused by fluororesin coatings and provides functions such as "preventing adhesion," "enhancing slipperiness," and "improving corrosion resistance." Additionally, it improves production efficiency in various settings by preventing product issues caused by material sticking and making the cleaning of adhered substances easier. [Features] - Antistatic properties of the coated surface - Excellent release from adhesives, preventing or making adhesion difficult - Improved lubricity due to the low friction coefficient of the fluororesin coating - Prevents poor flow and clogging in transport guides, chutes, pipes, etc. by processing them - Protects tanks and stirring blades that come into contact with chemicals, enhancing safety and durability *For more details, please refer to the PDF document or feel free to contact us.

• Surface treatment contract service

Fluoropolymer PFA lining with excellent chemical resistance that is difficult for chemicals and gases to penetrate.

"MY Lining" is a corrosion-resistant lining that significantly improves permeability compared to conventional PFA. It is expected to have a lifespan several dozen times longer than traditional products, making it ideal for environments where it could not be used before or where the previous lifespan was unsatisfactory. *For more details, please refer to the catalog or contact us directly.*

• Surface treatment contract service

It is a PFA lining that improves resistance to permeation and blistering, capable of thick film processing up to MAX 2000μm.

"MY Lining®" is a corrosion-resistant lining that significantly improves permeation resistance compared to standard PFA. - It offers a lifespan that is expected to be several dozen times longer than conventional products (compared to our coatings). - It is suitable for environments that could not be used before or places where the previous lifespan was unsatisfactory. - Lining can be applied to complex shapes such as eye plates and stirrers. 【Features】 ■ Dramatic improvement in permeation resistance performance (compared to our products) ■ Thick film processing is possible (MAX 2000μm) ■ Strong adhesion (vacuum resistance) ■ Seamless integrated processing ■ Lining can be applied to complex shapes such as eye plates and stirrers *For more details, please refer to the PDF document or feel free to contact us.

• Surface treatment contract service

Excellent water-resistant nylon coating

●Features: Excellent wear resistance, heat resistance, seawater resistance, and electrical properties. ●Applications: Valves, cleaning tanks, wires, etc. ●Hardness: F (pencil hardness) ●Operating temperature: -20 to 120°C ●Film thickness: 200 μm ●Substrate: Metal *For more details, please refer to the catalog or contact us directly.

• others

Incredible durability! A coating system suitable for applications with mechanical loads.

"Bycoat(R)" is a coating system that achieves the ideal functions of "sliding properties" + "release properties" + "wear resistance" by combining inorganic and organic surface treatment technologies. It withstands harsh usage areas such as the chutes and guides of injection molds and food packaging machines, providing reliable release and sliding properties. Additionally, due to its excellent dimensional accuracy, it is suitable for areas requiring micron-level precision. 【Features】 ■ Incredible durability ■ High hardness and resistant to scratches ■ Excellent wear resistance ■ Outstanding non-stick and release properties ■ Safe for use in molds requiring micron-level dimensional accuracy *For more details, please refer to the PDF materials or feel free to contact us.

• Other surface treatment equipment

Achieving water repellency, oil repellency, release properties, and non-stick properties with nano-level thin films of less than 1μm. Jigs, molds, and equipment that were once given up on can be improved with nano processes.

The nano process is a coating process that forms functional materials as thin films at the nano level, below 1μm, on substrates. It enhances properties such as water repellency, oil repellency, non-stickiness, and liquid sliding. Since it causes almost no dimensional changes and can maintain optical properties, it enables processing in fields where fluororesin coatings have been difficult, such as "precision parts" and "areas requiring high dimensional and surface accuracy." <Examples of industries that require high surface accuracy> Semiconductors, Automotive, Batteries, Electronic Components, Medical Devices, etc. 【Features of Each Series】 ■ TC-10S Excellent precision of 100nm, visible light transmittance, water repellency, and oil repellency. ■ TLS Series Superior non-stickiness against adhesive materials like tape. ■ NCFPC Series Excellent liquid sliding properties for water and oil. ■ HP Series Excellent hydrophilicity. Currently, we are distributing technical materials summarizing the features and functions of all series. If you are interested in more details or are facing challenges with surface treatment in precision fields, please download the materials or contact us directly.

• Surface treatment contract service

A sheet material in sticker form that prevents the adhesion of sticky substances just by sticking it on!

The "CTT Fabric Sheet" is a seal-like sheet material that prevents the adhesion of sticky substances. It is ideal for preventing the attachment of adhesives in manufacturing and transportation lines for adhesive tapes, raw rubber, seals and labels, and food products. Even when sticky substances come into contact, they can be easily removed, maintaining a smooth process. It has non-adhesive (release) properties that surpass silicone coatings, and it is resistant to deterioration even at high temperatures, offering excellent heat resistance and durability. It provides stable friction performance. This sheet material is easy to cut and can be applied like a sticker, allowing for simple installation without special knowledge or skills. *For more details, please download the catalog or contact us directly.

• Composite Materials

Dear Sir/Madam, I would like to express my congratulations on the continued prosperity of your company. Thank you very much for your exceptional support. We would like to inform you that our company will be closed for winter holidays during the following period. We apologize for any inconvenience this may cause and kindly ask for your understanding. 1. Winter Holiday Period From Thursday, December 28, 2023, to Thursday, January 4, 2024. 2. Business Operations After the Winter Holiday Period We will resume normal operations from Friday, January 5, 2024.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

★Campaign Information NEW Model Launch Commemorative Campaign Price: 370,000 yen Taking logistics, retail, and healthcare to the next stage. Achieving both operational efficiency and safety with hands-free voice control and real-time sharing. We are offering the latest smart glasses that are "usable" on-site at a limited quantity and special campaign price. ■Features of RealWear ARC3 Voice control allows you to focus on your work hands-free. The ARC3 is a smart glass that supports voice control, enabling screen operation even while using both hands. - Logistics: Confirming instructions during picking and inspection tasks - Retail: Confirming work instructions in the sales area and backroom - Healthcare: Verification tasks and information reference while wearing gloves You can confirm information without stopping your work, contributing to improved operational efficiency and safety.