A fire sensor integrated with a wire creates a wide-ranging fire alert area / New product: fire detection line (with fire push button).

A fire sensor integrated with a wire creates a wide-ranging fire alert area / New product: fire detection line (with fire push button).

■Features of Fire Detection Line (with Fire Push Button) 1. By simply pulling out and wiring the fire detection line (with fire push button), the fire detection circuit is completed, creating a fire alert area. The fire detection line (with fire push button) can be rolled up and moved to the necessary location for wiring. 2. Anyone can wire the fire detection line (with fire push button) by pulling it out. 3. The fire detection line (with fire push button) can be wired in places at risk of fire or arson, such as buildings, industrial machinery, and the grounds or buildings of temples/shrines, allowing for fire alert areas ranging from small to large. 4. The fire detection line (with fire push button) can be wired in outdoor and indoor large facilities such as forests near residential areas, parks, public facilities, and event venues, enabling a response to extensive fire alert areas. 【Notes】: Features of Fire Detection Line 1. It is an eco-friendly technology product with zero standby power due to its switching function. 2. The shape memory alloy has permanent memory, is rust-free, and retains its shape once activated. 3. Activation is a physical action that does not require power, ensuring no malfunctions and allowing for swift, precise use over many years. 4. Direct temperature sensing (temperature detection) can be done without measurement instruments. 5. The fire detection line can be used for indoor/outdoor wiring. 6. It is a non-reset type that allows for confirmation after activation.

• Sensors
• Sensors
• Safety Sensors

A fire memory sensor integrated with electric wires / New fire detection wire launched.

■Features of Fire Detection Wire 1. By extending the wiring, the fire detection circuit is completed, creating a wide-ranging fire alert area. 2. Wiring in buildings under construction, ships being built, aircraft, and vehicles completes the fire detection circuit. 3. Wiring around the exterior of residential garages, storage sheds, and warehouses completes the fire detection circuit. 4. Wiring in the precincts of temples/shrines and in livestock buildings completes the fire detection circuit. 5. Direct temperature sensing and signaling can be achieved through physical operation without the need for power sources or measuring devices. 6. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and signal. 7. Wiring similar to that of electrical equipment can be done, and it can be used for both indoor and outdoor wiring. 8. Utilizing the softening of the wire and the recovery of shape memory alloys, the two wires short-circuit to sense the temperature and signal. 9. It is an eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. This product meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reset; the activated location must be removed and reconnected).

• Sensors
• Sensors
• Safety Sensors

New product of fire memory sensor integrated with a combination of electric wires and shape memory alloy.

This product is a fire memory sensor with a set temperature of 80°C. It features a shape memory alloy attached to a wire in a coiled form, creating an integrated product. When the surrounding temperature reaches 80°C, the wire softens, and the shape memory alloy constricts the wire (restoring it) to short-circuit the two wires, generating a temperature sensing signal (80°C). It can be installed in equipment or locations at risk of fire, alerting the surroundings with alarms to prevent fires and providing daily monitoring with zero standby power for the switching function, making it an eco-friendly technology product. It is a non-resettable type, allowing for fire confirmation after activation. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. Set temperature: 80°C. ■ Contact information regarding this matter 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Sensors
• Safety switch
• Safety Sensors

Eco technology utilizing the restoration of shape memory alloys and the softening of electric wires / New product of temperature memory sensors

■Features of Temperature Memory Sensor 1. It operates through physical action without the need for power supply or measuring instruments, allowing direct temperature sensing and signal generation. 2. The operation allows for direct temperature detection through physical action, and the circuit configuration can be simple and low-cost. 3. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 4. It can continuously monitor various abnormal temperatures. 6. This product integrates shape memory alloy with the wire. Set temperature (80°C). 7. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires for temperature sensing and signal generation. 8. It is an eco-friendly technology product with zero standby power due to its switching function. 9. The shape memory alloy has permanent memory, is rust-free, and retains its state permanently once activated. 10. This product meets the performance standards of fixed temperature type detectors as specified by fire safety regulations (120 seconds). 11. It is a non-resettable type that allows for confirmation after activation. ■Contact Information for Inquiries 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Sensors
• Sensors
• Safety Sensors

New product: Temperature memory sensor (with terminals) that detects abnormal temperatures before fire in various industrial equipment.

■Features of Temperature Memory Sensor (with terminals) 1. Capable of detecting abnormal temperatures inside various distribution boards, control panels, and operation panels (set temperature 80°C). 2. Capable of detecting abnormal temperatures inside industrial equipment and electrical devices. 3. Operates through a physical mechanism that directly senses temperature and generates a signal without the need for power supply or measuring instruments. 4. The operation allows for direct temperature detection through physical action, enabling a simple circuit design at a low cost. 5. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 6. Capable of routinely monitoring various abnormal temperatures, ensuring reliable and safe maintenance management. 7. A product that integrates shape memory alloy with electrical wires and has crimped terminals attached (set temperature 80°C). 8. A simple, easy-to-use product with good accuracy, featuring eco-friendly technology with zero standby power due to its switching function. 9. The shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated, allowing for long-term use. 10. A product that meets the performance standards of fixed temperature type detectors (Type 1, 120 seconds) as specified by fire safety regulations. 11. Non-resettable, allowing for confirmation after activation (once activated, cannot be reactivated; the activated location must be removed and reconnected).

• Sensors
• Sensors
• Safety Sensors

New product of temperature sensing wire integrated with multiple temperature memory sensors.

■Features of Temperature Sensing Wire 1. Direct temperature sensing and signal generation through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Various abnormal temperatures can be monitored collectively on a daily basis, ensuring reliable and safe maintenance management. 4. Early detection of abnormal temperatures in various devices can prevent equipment damage and fires. 5. By simply extending the wiring, a wide range of abnormal temperature monitoring can be achieved. 6. Wiring similar to that of electrical equipment can be done, and it can be used for both indoor and outdoor wiring. 7. This product integrates numerous shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated, allowing for long-term use. 11. This product meets the performance standards of fixed temperature type detectors (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Sensors
• Sensors
• Safety Sensors

A new product for temperature sensing (70℃) that enables direct temperature detection and signaling through a physical operation without the need for power.

■Features of Temperature Sensing Wire (70℃) 1. It can directly sense temperature and generate signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches 70℃, the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for the regular monitoring of various abnormal temperatures, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it enables extensive abnormal temperature monitoring. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates numerous shape memory alloys at equal intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed temperature detectors as specified by fire safety regulations (120 seconds). 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated section can be deleted and reconnected.)

• Sensors
• Sensors
• Safety Sensors

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.