Crisis Management Industry Exhibition 2015

The DE02E (HDCP compatible) can transmit DVI-D signals up to 100m with a single LAN cable!

The DE02E can transmit DVI-D signals over LAN cables up to 100 meters. It can connect PC or DVR video to monitors located at a distance. - Transmits DVI-D (single link) signals up to 100 meters using CAT5e/6/6a/7 UTP/STP cables (CAT6 cables or higher recommended) - Both ends of the transmission cable use RJ45, allowing for commercially available LAN cables (straight wiring) - Maximum resolution: 1920x1200 - Supports HDCP 1.4

• Image Transmission Equipment
• Other security and surveillance systems
• Other PCs and OA equipment

A compact type DVI transmitter that can extend DVI-D signals with a single LAN cable (no external power required)! Easy wiring and connection!

DVI Signal CAT5e Transmitter Compact Type - Transmits DVI-D (single link) over a single CAT5e/6/7 cable. *CAT6 or higher cables are recommended. - Maximum transmission distance is 50m for 1920x1200 and 70m for 1024x768. *For longer distances, the DVI-D long-distance transmitter DE02E (HDCP compatible) can transmit up to 100m. - Set includes DE01ET (PC side) and DE01ER (monitor side). - Both ends of the transmission cable use RJ45, allowing the use of commercially available LAN cables (straight wiring). - No external power supply required. *It operates on power supplied from the DVI port of the video output device, but depending on the connected device, the available power may be insufficient, resulting in a shorter transmission distance. In this case, connect using a USB to micro USB cable (sold separately) or connect a DC5V power adapter SWP051000-1S-PSE (sold separately) or LTE10UW-S1-BS33 (sold separately) to the included micro USB conversion cable.

• Image Transmission Equipment
• Other security and surveillance systems
• Other PCs and OA equipment

IPC-600P allows for transmission of PoE/PoE Plus Ethernet over coaxial cable up to 600m without any relay!

The IPC-600P can transmit PoE/PoE Plus Ethernet over coaxial cable up to 600m. Additionally, it achieves a communication speed of up to 100Mbps in the direction from the camera to the Ethernet switch (monitor side), allowing for smooth transmission of high-resolution IP camera footage with large data volumes. Furthermore, by connecting a camera-specific switch SW105 or a DC56V power adapter to the IPC-600P-T on the monitor side, it is also possible to supply up to 25.5W (5C-2V 100m) to the camera. This is effective for connecting IP cameras in remote locations such as outdoors or for upgrading from existing analog cameras to IP cameras.

• Surveillance Camera System
• LAN construction and wiring work
• others

HD-SDI signal + RS485 + power can be extended up to 300m without relay using a single coaxial cable transmitter SDIVPD!

The SDIVPD extends HD-SDI signals up to 300 meters using a single coaxial cable (when using 5C-FB). It also allows for the combined transmission of camera power and RS485 signals. It can supply up to 2A of DC12V power to the camera, making it effective for connecting to cameras with relatively high power consumption.

• Image Transmission Equipment

5-port PoE/PoE Plus camera switch SW105! Supports transmission up to 200m with LAN cables and coaxial cables!

SW105 is a 5-port Ethernet switch for network cameras. Four of the five ports support PoE Plus power supply. PoE power supply can provide up to 39W per port, with a total maximum of 75W across four ports. Transmission of up to 200 meters is possible with LAN cables (CAT6 or higher).

• Other image-related equipment

Surge protector for PoE Plus compatible Ethernet that can be used without grounding work: JPOE-B2-1!

- Surge protector compatible with 10/100BASE Ethernet wiring - Supports power supply via PoE and PoE Plus - Protects devices from various surges without the need for grounding, including induced lightning (LFS), power switching surges (PSS), inrush current (SIC), and electromagnetic pulses (EMP) - Passed tests with combination waveforms (1.2/50μs, 8/20μs) at 6kV/3kA - Complies with IEC standard "IEC 61643-21," equivalent to "JIS C5381-21" (surge protective devices for communication and signal circuits, Category C2) - Complies with IEC standard "IEC 61000-4-4," equivalent to "JIS C1000-4-4" - New method of accumulating surges without discharging to ground and releasing them gradually (between pins 1-2 and 3-6) with patents obtained in Japan (patent number 5192002), the USA, China, and Taiwan * Protection for the power system between pins 4/5-7/8 is provided by conventional varistors. - DIN rail adapter included

• Other security and surveillance systems
• Other safety equipment
• LAN construction and wiring work

Surge protector for DC power/signal to protect equipment without grounding work MLT4-B1-1-12!

MLT4-B1-1-12 is a surge protector compatible with power supplies and control signals up to DC12V, as well as contact signals. - No grounding work is required to protect devices from various surges. It blocks surges from power wiring and surges caused by electromagnetic pulses. It is also effective against surges caused by chattering and the OFF state of inductive load circuits, which conventional lightning arresters cannot eliminate.

• power supply
• Other safety equipment
• others

PoE-compatible Ethernet 16-channel surge protector SP016P that protects devices from high voltage surges such as induced lightning in LAN wiring!

The SP016P protects LAN wiring that includes PoE/PoE Plus power supply for up to 16 systems with 10/100/1000M simultaneously. It diverts high voltage surges caused by induced lightning and other sources away to the ground before reaching the equipment. The surge protector should be installed as close as possible to the equipment that needs protection. When protecting a camera, it should be placed near the camera, and when protecting a monitor or NVR/server, it should be installed near the monitor/DVR/server. The basic principle of surge protection is to install devices on both the camera side and the display device (monitor) side. If the SP016P is installed on the monitor side, additional devices such as the IP06PH or JPOE-B2-1, SP006P can be installed for each camera wiring on the camera side.

• Other security and surveillance systems
• LAN construction and wiring work
• Other network tools

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 27th INTERPHEX Week Tokyo https://www.interphex.jp/tokyo/ja-jp.html 【 Dates 】 July 9 (Wednesday) - 11 (Friday), 2025 10:00 AM - 5:00 PM 【 Venue 】 Tokyo Big Sight (3-11-1 Ariake, Koto-ku, Tokyo 135-0063)

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely invite you to visit us during this busy time. 【 Exhibition Name 】 Automotive Technology Exhibition 2025 YOKOHAMA https://aee.expo-info.jsae.or.jp/ja/yokohama/ (An "online exhibition" will also be held during and around the event period) 【 Dates 】 May 21 (Wednesday) - 23 (Friday), 2024 10:00 AM - 6:00 PM *On the final day, 9:00 AM - 4:00 PM (Online exhibition: May 14 (Wednesday) - June 4 (Wednesday)) 【 Venue 】 Pacifico Yokohama (1-1-1 Minatomirai, Nishi-ku, Yokohama, Kanagawa Prefecture) Our booth number: "Concourse 505"

Nitto Kohki will be exhibiting at the "Data Center EXPO" held at Makuhari Messe Hall 1 from Wednesday, October 23 to Friday, October 25. [Booth Number: A6-23] At this exhibition, we will showcase the "Compact Zero Spill Coupler," which is specifically designed for data centers, including supercomputers. We will also present the "Blind Mate Type," a fitting exclusively for server cooling piping, as a reference exhibit.

[Speaker] Kenji Kikuchi, Executive Fellow, MDB Business Division, Japan Management Association Research Institute [Lecture Topics] 1. Important latest research trends to consider for the future 2. Latest business information gathering methods for future insights 3. Case studies on information gathering - perspectives on information collection and utilization 4. "Future insights" perspectives that leaders and personnel responsible for expanding existing businesses, new businesses, new product development, and exploring new applications should know 5. Introduction of the latest business information sources to pay attention to in the AI era for "future insights" 6. Q&A / Business card exchange

[Speaker] NTT ME Corporation Director of Social Infrastructure Design Department, Mr. Osamu Sasaki [Key Lecture Content] Starting from the challenges faced through the maintenance and operation of the vast communication infrastructure owned by NTT East Japan, such as aging equipment, a shortage of workforce, and the intensification of disasters, we will organize the structural issues that the entire social infrastructure sector, including roads and water supply and sewage systems, faces. Based on this, we will present ideas for realizing sustainable social infrastructure, including the transition to smart maintenance and preventive maintenance utilizing accumulated data. Furthermore, we will introduce the direction of initiatives considered by NTT East Japan, future prospects, and remaining challenges. [Lecture Items] 1. Past initiatives and challenges at NTT East Japan 2. Challenges faced by the social infrastructure sector 3. Towards the realization of sustainable social infrastructure 4. Direction of initiatives considered by NTT East Japan 5. Future initiatives and challenges 6. Q&A / Business card exchange