Report on the Non-Destructive Testing Comprehensive Exhibition

IS500 Digital Eddy Current Testing Equipment for Manufacturing Line Input

The feature of this new product series lies in the coexistence of low noise and high-speed inspection. By fully digitally processing the demodulated signal with an extremely wide bandwidth of 10 kHz, we have achieved a low noise figure and accomplished ultra-fast multiplexing at 32 kHz (from probe to probe).

• Flaw detection testing
• Other inspection equipment and devices
• Defect Inspection Equipment

High-performance portable eddy current flaw detector with a 5.7-inch large screen LCD.

The newly developed ELOTEST M3 is a portable eddy current flaw detector based on the minimal and lightweight ELOTEST M2, featuring a large LCD screen with excellent image quality and brightness as its main characteristic. In inspection sites, when multiple technicians need to view the flaw detection signals on a single screen simultaneously, or when it becomes difficult to support the device with both hands for probe holding, the ELOTEST M3 offers the optimal choice with its large screen and lightweight design.

• Defect Inspection Equipment

Detect all surface defects of aircraft engine parts with the push of a button.

The automatic eddy current testing system EloScan performs eddy current testing on cylindrical aircraft engine components at the push of a button. With a highly versatile design and precise probe operation, it can scan complex shapes that require high repeatability, automatically detecting defects on the surface of the components.

• Defect Inspection Equipment

An fully automatic system that enables eddy current testing of aircraft wheels with the push of a button.

The aircraft wheel eddy current testing system EloWheel can inspect wheels with a diameter of up to 1000mm and a weight of 250kg, and has the following four features: - Inspection of cracks in the pipe wall and bead seat - Internal crack inspection using low-frequency probes - Bolt hole scanning using a hand rotor - Network connectivity available

• Defect Inspection Equipment

World's smallest and lightest portable eddy current flaw detector M2V3

The world's smallest and lightest portable eddy current flaw detector based on ergonomics. The ELOTEST M2V3 is equipped with dual frequencies (with mixing function) and is ideal for manual inspections (surface cracks, internal defects in boreholes, internal defects in multilayer structures), and it also has conductivity and film thickness measurement capabilities. The inspection frequency range is 10Hz-12MHz, achieving optimal signal processing through full filter functions (LP, HP, BP). The high-resolution LCD display achieves perfect contrast, making it easy to read in any lighting environment. A calibration standard test piece is mounted on the handle for instant signal verification. With nine keys using pictograms, all functions can be accessed from the setup menu, making it a user-friendly model for field operators.

• Defect Inspection Equipment

Achieving high-resolution flaw detection and high-speed material sorting with an eddy current testing system on the manufacturing line.

Faster, higher, stronger—this series of eddy current testing equipment equipped with V5 technology combines ultra-high-speed inspection, ultra-high sensitivity, ultra-high resolution, and signal dynamics to provide our customers with the best value!

• Defect Inspection Equipment

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Parking space management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, enabling efficient parking lot operations. For large parking lots, we recommend the "Floor Management Method" and "Block Management Method," which focus on cost reduction. Sensors are installed at regular intervals to count and manage the number of passing vehicles. This method offers the advantages of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 For smaller facilities, we recommend the "Parking Space Management Method," where sensors are installed in each parking space to display availability with high accuracy. By providing reliable occupancy information, this method helps reduce unnecessary entry of new vehicles and ensures safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensors wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors wirelessly notify in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Features: ● Equipped with Intel Core Ultra 5 125H/Ultra 7 155H・155U ● DDR5 5600MHz SO-DIMM x2 slots (up to 96GB) (sold separately) ● LVDS x1, eDP x1, DP x1, HDMI x1 ● LAN x3, SATA 6Gb/s x1, 8-bit GPIO ● USB 3.2 Gen2 x2, USB 2.0 x4 ● M.2 2280 M-Key x1 (PCIe 4.0 [x4]/SATA), M.2 3052 B-Key x1, M.2 2230 E-Key x1 ● DC 9~36V input * Heat spreader and fan-equipped heat sink sold separately GENE-MTH6-FAN: Fan-equipped heat sink GENE-MTH6-HSP: Heat spreader * Memory, storage, and OS are sold separately.