The "Product Selection Guide 2017" for flow meters and flow switches has been completed.

Measuring with two sets of sensors from different angles, more reliably and more accurately... The pinnacle of ultrasonic time-difference flow meters that meets the advanced demands of our customers!

High-precision measurement with two sensors on a single pipe. By simply attaching the sensors to the outside of the pipe, you can measure the flow rate of the fluid flowing inside the pipe. Measurement can be done without modifying the existing piping.

• Flow Meter
• Sensors

The sensor and converter are integrated and ultra-compact! Compliant with IP67, it is resistant to noise and prevents failures.

The EGE Corporation's "Flow Switch SC440 Series" is a compact thermal flow switch with an integrated sensor and converter. It features an all-SUS housing that is resistant to noise and less prone to failure, and the flow rate can be easily adjusted, making it user-friendly for anyone. 【Features】 ■ Protection rating IP67 ■ Easy-to-read LED display for flow rate ■ Pressure resistance of 10MPa ■ Operating temperature range of -20 to +80°C *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Flow Meter
• Other measurement, recording and measuring instruments
• Sensors

A flow meter developed for measuring very small flow rates!

The 200 series, capable of measuring minute flow rates starting from 10 ml/min, is a flow meter developed for measuring small flow rates. It is made of materials with excellent corrosion resistance, suitable for measuring chemical substances and pure water.

• Flow Meter
• Other measurement, recording and measuring instruments
• Sensors

Wide compatibility for micro flow in food, pharmaceuticals, semiconductors, and more! This is TITAN's state-of-the-art flow meter, equipped with the latest technology.

"Atrato" is a flow meter that uses a straight tube without protrusions or moving parts inside. It can be used in a wide range of fields, including pharmaceuticals, chemicals, food & drink, and industrial laboratories. With a functional design, the latest technology and know-how from TITAN have enabled stable measurements across the entire flow range through optimized programming and meticulous design.

• Flow Meter
• Other measurement, recording and measuring instruments
• Sensors

A lightweight and compact electromagnetic flow meter with a resin body! Two types of power supply are available: DC power and battery.

The WMP series is a general electromagnetic flowmeter that utilizes Faraday's law of electromagnetic induction to measure the flow rate of conductive liquids. It is lightweight and compact, making installation easy, and it offers options for battery or DC power supply. Additionally, considering corrosion resistance, it uses SUS316 for the electrodes and polypropylene for the flow tube. It is the most convenient electromagnetic flowmeter available.

• Flow Meter
• Other measurement, recording and measuring instruments
• Sensors

Resin-made flow meter with excellent durability and maintenance.

The rotor, which contains a magnet, rotates according to the speed of the flow. A sensor detects the rotation speed and measures the flow rate. Due to its simple component structure, it has excellent maintainability, making part replacement and cleaning easy.

• Flow Meter
• Other measurement, recording and measuring instruments

Insertion type paddle wheel flow meter!

The IP series is an insertion-type turbine flow meter. It has a flow velocity range of 0.09 to 9 m/s and can measure a wide range with a rangeability of 100:1. It can be used in various applications.

• Flow Meter
• Level gauges and level switches
• Other measurement, recording and measuring instruments

A flow meter with excellent maintainability!

Since it is an insertion type, there are significant advantages for large diameters. It comes standard with an open collector pulse output, and additional features such as analog output or field indication integrators can be added as needed. It is a flow meter that has been stripped down to its essentials and is configured in the simplest way possible.

• Flow Meter
• Level gauges and level switches
• Other measurement, recording and measuring instruments

A flagship model of ultrasonic time-difference type that can accommodate large diameters of up to 3000mm.

Introducing the high-functionality, high-performance, waterproof ultrasonic time-difference flow meters ISTT-D6000 and ISTT-D7000, which are robust for field use. They can be used for various applications such as flow measurement of treated water in sewage treatment plants, industrial water and agricultural water flow surveys, and chilled and hot water piping in building air conditioning systems.

• Sensors
• Flow Meter
• Sensors

High-spec ultrasonic flow meter that combines high precision, advanced functionality, and high reliability.

Ultrasonic flow meters only require the installation of a detector on the outside of the piping, eliminating the need for any modifications to the piping. As a result, construction costs can be significantly reduced, and the time required for construction can be greatly shortened. Additionally, since detection occurs from the outside of the piping, there is no pressure loss, and it is suitable for measuring pure water and chemicals due to the non-contact nature with the fluid. Common Features: - One detector can handle large diameters up to φ3000mm. - Equipped with the latest DSP chip, improving accuracy and reliability. - Enhanced user assistance features, including a self-diagnosis program. - Capable of displaying both forward and reverse flow. - Excellent reproducibility and linearity. - Improved measurement performance during bubble intrusion. - Capable of measuring fluids with unknown sound speeds. SL1288i (Portable Type): - The main unit features a touch panel keypad, providing excellent operability. - Capable of measuring from a small diameter of 15mmφ. - Allows for trend graph confirmation of flow rate or flow velocity on the main unit. - Approximately 10 hours of continuous operation on a full charge. ISTT-D9000: - Easy settings with an interactive keypad. - Compact and lightweight, making installation easy. - Reverse direction negative integration can also be set.

• Flow Meter
• Other measurement, recording and measuring instruments
• Ultrasonic Flow Meter

Ultrasonic flow meter designed for open water channels. Capable of measuring average flow velocity with high precision.

The DX&PX series can measure average flow velocity with high precision. Ultrasonic waves are emitted at a certain angle from a detector installed in the waterway. Immediately afterward, it switches to receiving mode and captures the ultrasonic waves reflected by suspended particles (impurities and bubbles) in the fluid. This is visualized and stored as the first scan after digital processing. Similarly, emission and reception are performed, and the flow velocity is analyzed based on the movement distance of suspended particles compared to the first scan. This is stored as the second scan, just like the first scan. Additionally, the flow velocity distribution, which changes with water depth, is measured intermittently by dividing it into windows. By repeating this operation up to 2000 times per second, the average flow velocity is measured in real-time with high precision.

• Other electric meters
• Flow Meter
• Other measurement, recording and measuring instruments

Inline impeller (turbine) flow meter capable of measuring from a minimum of 10 ml/min.

Depending on the flow rate and fluid, you can choose between two types of sensors: optical sensors and Hall effect sensors. The wetted parts use a resin with excellent corrosion resistance, making it suitable for measuring small flow rates of chemical substances and pure water.

• Flow Meter
• Other measurement, recording and measuring instruments

Active in various fields such as machinery, pharmaceuticals, food, semiconductors, air conditioning, industry, and processing plants! It has no moving parts and monitors with constant stable operation.

The EGE company's flow switch is equipped with two thermistors inside the sensor. The two thermistors are constantly supplied with a fixed amount of heat from the amplifier. Thermistor R2 is covered with a resin that has poor thermal conductivity and is maintained at a constant amount of heat. Meanwhile, thermistor R1 is cooled in accordance with the flow rate of the fluid flowing through the pipe, resulting in a difference in heat between R2 and R1. This difference in heat is used to determine the flow rate.

• Flow Meter
• Sensors
• Flow Sensor

A volumetric flow meter with an oval gear design that can accommodate special specifications, making it suitable for various fields such as food, chemicals, and petroleum products.

The OG series is a volumetric flow meter with an oval gear design that has a wealth of achievements both domestically and internationally. Its simple structure enables high precision and high reliability. The gear components are made of PEEK (polyether ether ketone), which offers high chemical resistance and strength, while the detection magnets use special ceramic magnets. The main case can be selected from three materials: SUS316, aluminum, and PEEK, depending on the application. It can also accommodate special specifications of up to 200°C and 40 MPa (for SUS316), making it suitable for various fields such as food, chemicals, and petroleum products.

• Flow Meter
• Sensors

You can directly connect the flow meter and the indicator! It is calibrated with oil of 21 cSt as standard.

The "CT Series" is a turbine flow meter that achieves a maximum operating pressure of 48 MPa and a maximum measurement flow rate range of 1500 L/min. When fluid flows in, the turbine embedded inside the main body increases or decreases according to the flow rate. Since the flow rate for each rotation of the turbine is constant, knowing the rotation speed of the turbine allows us to determine the flow rate. A pickup sensor detects the rotation speed of the magnet embedded in the turbine and outputs an analog signal after linearization (the voltage pulse output is not linearized). 【Features】 ■ Can directly connect the flow meter and indicator ■ Analog output of 4-20 mADC or 0-5 VDC ■ Calibrated with oil of 21 cSt as standard ■ High pressure-resistant design ■ Wide flow range For more details, please contact us or download the catalog.

• Flow Meter

A rich lineup of hydraulic system testing equipment to reduce the burden on operators!

WEBTEC's hydraulic testing equipment offers solutions to the common problem many experience: "the hydraulic system fails to operate properly when it absolutely cannot have any issues." Our product lineup includes innovative features not found in competitors' products, such as two-way counterbalance pressure valves, built-in rupture disks, and simple control devices. 【Example of Products】 ■ Low-pressure flow meter → Ideal for monitoring tank systems → Ranges from 0.2 to a maximum of 110 lpm at 70 bar → Aluminum versions available for oil ■ Portable hydraulic tester - Easy digital tester → Measures flow (1% FS), pressure, and temperature → Simple on/off switch → Simulates machine performance using a pressure valve For more details, please contact us or download the catalog.

• Testing Equipment and Devices

A flow meter that measures the flow rate of fluid flowing inside a pipe from the outside of the pipe. It allows for flow measurement without modifying existing piping!

The ISTT-D7000 is a flow meter that measures the flow rate of fluid flowing through pipes from the outside of the piping. Since the detector is installed on the outside of the pipe, flow measurement can be performed without modifying existing piping.

• Flow Meter
• Other measurement, recording and measuring instruments
• Sensors

Flow inside the piping can be measured from the outside of the piping!

The flow rate of the fluid flowing inside the pipe can be measured from the outside of the pipe, and by capturing the temperature signals at the inlet and outlet of heat exchangers, the heat quantity can be measured. By using surface temperature sensors, it is possible to measure the heat quantity without processing the pipe.

• Sensors
• Flow Meter
• Sensors

An analog output anemometer. One model can accommodate many piping systems with an insertion type!

Introducing the "Thermal Wire Wind Speed Sensor LN450GA," which is low-cost, has no moving parts, and is less prone to malfunction. The sensor head is made of SUS, making it resistant to impact and characterized by low pressure loss.

• Sensors
• Flow Meter

Compact-sized electromagnetic flow meter with integrated display, available in two types: 0-40L/min and 0.2-80L/min.

The SDI series is an inline electromagnetic flow meter of a compact type with an integrated indicator manufactured by EGE. It supports analog output, cumulative pulse output, and programmable PNP output.

• Flow Meter
• Other measurement, recording and measuring instruments
• Sensors

A next-generation ultrasonic flow meter that balances ease of use and high specifications!

Ultrasonic flow meters require no processing of the piping since the detector is simply installed on the outside of the pipe. As a result, construction costs can be significantly reduced, and there is no pressure loss. Additionally, because there is no contact with the fluid, they are suitable for measuring pure water and chemicals. Common Features: ● Enhanced reliability with the latest DSP chip ● Comprehensive user assistance features, including self-diagnosis programs ● Display in both forward and reverse directions is possible ● Reverse direction negative integration can also be set ● Excellent reproducibility and linearity ● Improved measurement during bubble inclusion Features of SL1168P (Portable Type): ● Integrated monitor and keypad for easy portability ● Equipped with a data logger that can record measurement data on a 2GB SD card ● Easy installation with a magnetic sensor frame ● Compatible with pipe diameters from φ25 to 1200mm using the included detector ● Lithium-ion battery allows for up to 16 hours of continuous operation Features of SL1168 (Fixed Type): ● Easy setup with an interactive keypad ● Ultra-compact and lightweight for easy installation

• Flow Meter
• Other measurement, recording and measuring instruments
• Ultrasonic Flow Meter

Only carefully selected high-performance, high-quality items. Of course, after-sales support is also thorough.

Hi-Tech delivers flow meters and flow switches that are active around the world in Japan. We carefully select only high-performance, high-quality products. Of course, our after-sales support is also thorough. With numerous delivery records in Japan, we are well-regarded across a wide range of fields.

• Flow Meter
• controller
• Sensors

Analog output liquid flow sensor. It has many advantages in maintenance due to the absence of a drive unit.

Introducing the "Thermal Flow Meter SN450," which is low-cost, has no moving parts, and is less prone to malfunction. It is an insertion type, making it compatible with piping of 15A or larger with just one model, and it is characterized by low pressure loss.

• Flow Meter
• Other measurement, recording and measuring instruments
• Sensors

This is a low-cost type flow meter/flow indicator composed of a low-cost diesel flow meter and a battery-operated instantaneous and cumulative flow indicator.

It operates for 4 years and issues an alarm indication when there is 1 year of life remaining. It digitally displays instantaneous and cumulative flow rates along with operating time. It is used for boiler management, engine testing, and more.

• Sensors
• Flow Meter

Insertion-type electromagnetic flow meter EX series and impeller flow meter IP series compatible options.

The AO55 converts the NPN open collector pulses from the EX series insertion electromagnetic flow meters and the IP series impeller flow meters into loop-type analog output. We also introduce the FT420, a momentary and cumulative indicator compatible with the NPN open collector pulses from the EX series insertion electromagnetic flow meters and the IP series impeller flow meters, as well as the FT415/FT421, which supports rectangular waves from the micro-power sensors of the IP series impeller flow meters.

• Sensors
• Sensors

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation in environments with temperature differences, such as cold storage warehouses, is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable) ○ LED display and response sound allow for easy confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.