Exhibiting at the International Secondary Battery Expo (Tokyo Big Sight) from February 28 ◆ Showcasing the Filmix® electrode material dispersion device for lithium-ion batteries, fuel cells, and all-solid-state batteries, as well as the continuous production technology CDM process for electrode material slurries. Free seminars will also be held at the venue!

[Video Available] Capable of producing highly stable electrode material slurries! A mixer for nanoparticle dispersion that achieves a sharp particle size distribution and micronization to nanometers.

Filmix® is a mixer (dispersion stirring device) that enables sharp particle size distribution and micronization to nanometer sizes, which was difficult with conventional high-speed stirrers. It significantly shortens development time for battery device manufacturing, such as lithium-ion batteries and capacitors, through emulsification and dispersion in seconds. The 56-L model can operate in both batch and continuous modes on a tabletop. Once the conditions are set in batch mode, continuous experiments can be conducted by setting up a line. This single unit can be compactly used from research and development to small-scale production! ◆◇━━━━━━━━━━━ 　　　Testing Now Available! ━━━━━━━━━━━━◇◆ If you have materials that are challenging for dispersion or homogenization, please give it a try! We are currently offering two booklets related to battery and fuel cell manufacturing as a gift! 　◎ 'Battery Device Measures Booklet'　　 　◎ 'Booklet on Fuel Cell MEA Manufacturing' *If you would like to request a test or booklets, please feel free to contact us.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

Continuous manufacturing process and equipment for electrode slurry using Filmix® developed for dispersing electrode materials of lithium-ion batteries and fuel cells.

CDM stands for Continuous Dispersion Mixing, which is a continuous manufacturing process for electrode slurries using Filmix® developed for the dispersion applications of electrode materials in lithium-ion batteries and fuel cells. The nanoparticle design mixer (dispersion stirring device) Filmix® 56-L type is compatible with both batch and continuous processes. It can also be used by setting up a continuous line on a tabletop. ▼▼ Basic Procedure for Continuous Operation ▼▼ 1) Preliminary dispersion with a homodisperse or similar device 2) Transfer of the processing liquid using a pump 3) Dispersion with Filmix® ■ This single unit can be compactly used from research and development to small-scale production! ■ There are many successful scale-up cases from research machines to production machines! ◆◇━━━━━━━━━━ 　　Testing Now Available! ━━━━━━━━━━━◇◆ If you have materials that are problematic for dispersion or homogenization, please give it a try. We are currently offering two booklets related to battery manufacturing as a gift. 　◎ 'Battery Device Countermeasures Booklet'　　 　◎ 'Booklet on Fuel Cell MEA Manufacturing' * If you would like to request a test or booklets, please feel free to contact us.

• Mixer/agitator

Improving the quality of slurry and reducing manufacturing costs! Introducing continuous production technology for electrode material slurry using Filmix® (continuous processing in the kneading process).

Using the dispersing mixing device Filmix(R), active materials, conductive materials, solvents, and binders are uniformly dispersed in a short time. A slurry with high reproducibility of viscosity and excellent stability can be continuously produced. <Components of the CDM Process> ○ Pre-mixer ◎ Filmix(R) ○ Storage tank (conditioning tank) <Advantages of the CDM Process> ■ Produces high-quality slurry! ■ Reduces manufacturing time! ■ Cost reduction! (Compact factory, labor saving) ■ Easy to scale up!

• Secondary Cells/Batteries
• Lithium-ion battery
• Mixer/agitator

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This is an introduction to "outer diameter film polishing," which is used for ultra-finish machining of various shaft-type workpieces. - Wouldn't you like to achieve ultra-finish machining more easily, safely, and with less variation? Please take a look at what film polishing is, along with related products and catalogs!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

We are pleased to announce that Tokyo Machine Works Co., Ltd. will be exhibiting at the "INNOVATION EXPO 2025" to be held at Tokyo Big Sight from September 10 (Wednesday) to September 12 (Friday), 2025. 【Exhibited Equipment】 - 1-ton portable autonomous mobile robot (AMR) - 2-ton portable unmanned transport vehicle (AGV) - Shutter-equipped unmanned transport vehicle - Autonomous cleaning robot, etc. 【Booth Number】 - 6-405 You will have the opportunity to see each machine up close, including demonstrations that link the equipment together. We sincerely look forward to your visit during this event. Please note that pre-registration (free of charge) is required to attend the exhibition, so we kindly ask you to register using the link below. https://www.logistech-online.com/jp/registration.php?exhibitor=EX000072 If you would like an invitation, please request it through our contact form.