Exhibiting three types of water-stopping products at the disaster prevention event "2018 Disaster Prevention Industry Exhibition in Tokyo" held at Tokyo Big Sight <Visitor gifts available>.

The easy-to-install water stop board "Rakusetto" that can be set up effortlessly by one person.

<Easy and quick installation in about 2 minutes by one person> The installation method is simple, as it only requires securing the panel with brackets to the opening, allowing for a speedy setup in about 2 minutes by one person. <Can be installed in various openings> It can be installed in diverse openings of buildings, such as those with automatic doors or freely opening doors, as well as openings without partitions (fixtures). <Access through the opening is possible even after installation> After installation, the existing fixtures can still be opened and closed, allowing access through the installed panel in cases of emergency where entry and exit are necessary, even in stores with only one entrance. <No preliminary construction required for installation> The panel is directly attached to the existing fixture frames, providing several advantages: 1. No preliminary construction is required for installation, 2. Easy to introduce regardless of whether the building is new or existing, 3. Construction costs can be reduced, 4. Does not compromise the building's design, etc. <Exhibits high water stop performance with leakage of 20 liters/(h·m²) or less> The aluminum panel is equipped with water stop rubber on both ends and the bottom, which tightly adheres to the frame and floor surface due to the fixing brackets, resulting in a leakage rate of 20 liters/(h·m²) or less, demonstrating high water stop performance comparable to that of standard water stop boards.

• others

The operability of the steel door remains the same, ensuring water pressure resistance! Measures against flooding from sudden heavy rain [2015 Good Design Award winner].

Are you taking measures against flooding? With "Aquaed," you can prepare for extreme weather and heavy rain. This waterproof door maintains the lightweight operability of a steel door while ensuring water pressure resistance. It employs a unique waterproof rubber and waterproof gremon to prevent flooding. It is also ideal for countering sudden heavy rains, with a waterproof height capability of up to 3 meters. It can be utilized in entrances of buildings, stores, factories, and apartments. It achieves a lower cost compared to heavy waterproof doors. ★Awarded the "Good Design Award" in 2015★ 【Features】 ■ The door thickness is only 40mm ■ Can be used as a fire door (with self-closing function) ■ Lower installation costs compared to conventional waterproof doors For more details, please refer to the catalog or feel free to contact us.

• Other safety and hygiene products
• others

At the Dry Fog Humidification System Free Demo Experience, you will have the opportunity to actually experience our Dry Fog, as well as our single-fluid and dual-fluid humidifiers. We will explain the differences from conventional humidifiers and the effects of implementation. In addition to introducing the latest case studies, we will also provide time for you to consult directly with our specialized staff. Please select a convenient venue and date from the application page and apply. * The "morning session" and "afternoon session" contain the same content. Please participate at a time that suits you. * This event is intended for users only. Participation from trading companies, other companies in the same industry, or for sales purposes to our company is not permitted. Venues: ■ Yamagata Venue: 3/12 (Wed) at Yamagata International Exchange Plaza 3/13 (Thu) at Sakata Chamber of Commerce and Industry ■ Sendai Venue: 3/14 (Fri) at Kiri no Ikeuchi Sendai Branch ■ Tokyo Venue & Osaka Venue: 3/18 (Tue), 3/19 (Wed), 3/21 (Fri) at Kiri no Ikeuchi Tokyo Sales Office & Kiri no Ikeuchi Osaka Headquarters ■ Nagoya Venue & Fukuoka Venue: 4/9 (Wed), 4/10 (Thu), 4/11 (Fri) at Kiri no Ikeuchi Nagoya Sales Office & Kiri no Ikeuchi Fukuoka Sales Office

[Speaker] Mr. Manabu Kamitani, Manager, Performance Unit, Arthur D. Little Japan K.K. [Key Lecture Content] In recent years, both quantum technology and AI have seen technological development and investment at the national level, not just by companies, in various countries. While private enterprises are advancing the verification of the potential and promise of both quantum and AI technologies, the societal penetration of these technologies differs due to the uncertainty of their evolution. This has led to a demand for advanced technological intelligence capabilities that balance the maturity of the technology with expectations for its application in business development and internal implementation based on cutting-edge technologies. This lecture will multifacetedly examine the key points of how to utilize developing advanced technologies, taking into account the current understanding and future direction of quantum technology and AI. [Lecture Items] 1. Current status of the utilization of quantum technology and AI 2. Future development directions of quantum technology and AI and challenges toward realization 3. Considerations for business development and planning for advanced technologies based on the current status and challenges 4. Summary of today's discussion 5. Q&A / Business card exchange

[Speaker] Takayuki Furuta, Director of the Future Robot Technology Research Center (fuRo), Executive Director of Chiba Institute of Technology [Key Lecture Content] The true value of robotic technology lies in its ability to directly impact the physical world, creating tangible value for society, from economic activities to people's daily lives. This lecture will focus on the evolution of robotic technology as a core system that connects cyberspace and the real world, introducing development examples of AI-equipped mobility. Furthermore, while considering the latest trends in robotic technology being utilized in real society, we will explore the future direction and potential of technological development. Additionally, we will indicate the direction that Japan's industry and technology should aim for in the future and reflect on the grand design of society and technology necessary for its realization. [Lecture Items] 1. The essence of robotic technology and its social value 2. The fusion of AI and robotics 3. Development examples of AI mobility 4. How robotic technology is transforming industry and society 5. The grand design of Japan's technology and industry 6. Q&A / Business card exchange *The lecture content may be subject to change based on the latest trends.

[Speaker] Tetsuji Narita, President of NRT Energy Bridge Co., Ltd. [Key Lecture Content] Due to the rapid expansion of AI data centers, the power system is transitioning from "ensuring quantity" to "simultaneous design of reliability, environmental value, and construction period." While the government is taking steps to ensure system capacity in collaboration with watt-bit and in GX strategy regions, on-site, different entities such as DC operators, retailers, power generation and storage, local governments, and transmission companies tend to operate in different languages. This lecture will organize the current state of the system from PPA to practical design of power source portfolios, providing a checklist for each stakeholder and a common language to "operate on the same schedule." [Lecture Items] 1. Overall Overview: Structural organization of how AI DC has become a "design variable" in the power system 2. Current state of watt-bit collaboration and connection discipline 3. GX strategy regions (DC aggregation type): Issues in industrial cluster design 4. Practical design of PPA and power source portfolio 5. Preparation for environmental value and 24/7 CFE 6. Summary: Stakeholder-specific checklist and common schedule 7. Q&A / Business card exchange

[Speaker] Kazuhiro Kaiho, Manager, Environmental, Energy, and Resource Strategy Group, Research and Consulting Division, Japan Research Institute, Ltd. [Key Lecture Content] Decarbonization of automobiles is entering a phase where EVs, hydrogen, and RNG are utilized according to the industrial structure of countries and regions, energy resources such as renewable energy and biomass, and infrastructure constraints, rather than being solely focused on EVs. This presentation will compare the U.S. tax credits, LCFS, and RFS; China's NEV promotion policies and hydrogen demonstrations; and Europe's RED III and AFIR, organizing which fuels each region is aiming to expand for which applications. It will highlight different winning strategies for passenger and commercial vehicles and provide insights for Japanese companies. [Lecture Items] 1. Why is it important to view "automotive fuel policy" through regional comparisons now? 2. United States: Expanding RNG, hydrogen, and low-carbon fuels through market incentives. 3. China: A dual-front strategy focusing on EVs while nurturing hydrogen for commercial vehicles. 4. Europe: Advancing EVs, hydrogen, and renewable gas through regulatory leadership. 5. Insights for Japanese companies: What should Japan learn and how should it proceed? 6. Q&A / Business card exchange.