Notice of Participation in the 42nd Plant Maintenance Show from July 18 to July 20, 2018.

Notify of gas and liquid leaks in piping by discoloration! Early detection of seal failures and prevention of dripping is possible easily and at low cost.

"Acid Tape / Basic Tape" is a product that can be wrapped around areas prone to leakage, such as valves, flanges, and rust spots, allowing for early detection of dangerous gas and liquid leaks and preventing dripping. In the event of a leak during normal operation or maintenance, it absorbs initial leakage to prevent scattering and changes color to signal danger. "Acid Tape" is used for detecting leaks of strong acidic gases and liquids, while "Basic Tape" is used for detecting leaks of strong alkaline and other gases and liquids. 【Features】 ■ Resistant to UV rays and temperature changes, suitable for outdoor use ■ Leaks from hidden areas can be confirmed from a distance ■ No construction, tools, or adhesives are needed; it can be easily wrapped, secured, and rewrapped anywhere. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Organic Natural Materials
• Defect Inspection Equipment
• Other safety and hygiene products

Notify of initial leaks of alkali and other substances by discoloration! A tape to prevent the risk of gas and liquid leaks from pipes.

"Bashid Tape" is a tape that absorbs initial leaks of alkaline and other hazardous liquids and gases to prevent dispersion, changing color to signal danger. It can be wrapped around areas of concern for leaks, such as valves, flanges, and rust spots, to prevent hazards. Due to its elasticity, it can be easily wrapped around complex areas without the need for adhesives, fasteners, or cutting tools, and it does not leave a sticky residue. 【Features】 - Wrap around areas of concern for leaks to prevent hazards - Changes color to signal danger - Resistant to UV rays and temperature changes, suitable for outdoor use - Makes it easier to identify hard-to-see areas - Can be rewrapped even after being unwrapped *For more details, please refer to the PDF document or feel free to contact us.

• Organic Natural Materials
• Defect Inspection Equipment

Early detection of leaks and prevention of dripping for highly acidic liquids in piping valves and flanges! Why not prevent the risk of overlooking gas-liquid leaks from pipes at a low cost?

The leak detection color-changing monitoring tape "Acid Tape" absorbs initial leaks of strong acids such as hydrochloric acid, strong acids, and nitric acid, preventing dispersion and changing color to signal danger. It is easy to spot even in hard-to-see areas, and it is resistant to UV rays and temperature changes, making it suitable for outdoor use! 【Features】 ○ It is elastic and can be easily wrapped around complex shapes. ○ Simply press the pulled end against the wrapped fabric to secure it. ○ No adhesives, fasteners, or cutting tools are needed. ○ Usable outdoors. ○ Clearly changes color, making it visible from a distance. ○ Cost-effective as no construction is required. *For more details, please download the catalog or contact us.

• Organic Natural Materials
• Defect Inspection Equipment

Initial response to oil spill incidents! Quickly handle accidents with prompt action. The oil absorption kit is compactly organized.

"Oil-less Q" is an emergency oil spill response kit that compactly assembles materials for preventing and absorbing oil spread on roads and water surfaces. It is designed to prevent and absorb spills from fuel, battery fluid, and other substances due to traffic accidents, as well as to contain oil spills in ditches and small rivers. 【Features】 - Lightweight enough for small children to carry, it can be stored in the corner of a compact car. - The quicker the initial response to an oil spill accident, the easier it is to ensure effective recovery with minimal effort. *For more details, please download the catalog or contact us.

• Other consumables
• Other safety and hygiene products

The suction speed is fast, so the work finishes quickly without much effort! The standard for road surface oil absorbents. For absorbing oil, water, and other liquids on road surfaces.

The AC light has countless fine pores and possesses strong adsorption power. 【Features】 ○ If you sprinkle it over spilled liquids, it will absorb them without needing to be stirred. It remains dry even after adsorption. ○ Made from natural diatomaceous earth, it has a weakly acidic pH similar to human skin. Moreover, it contains minimal dust, so it does not irritate the skin, mucous membranes, or respiratory tract, nor does it harm the eyes. ○ It can safely adsorb and recover even strong acids and strong alkalis. (However, please avoid hydrofluoric acid.) ○ When it adsorbs oil, it will naturally decompose if sprinkled in areas like weedy land. (However, this is limited to company-owned land.) ● For other functions and details, please contact us.

• Wastewater/wastewater treatment equipment
• Other water treatment equipment
• Other consumables

Sekisui Filler Co., Ltd. will exhibit at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Automotive Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coatings - Optical adhesives We sincerely look forward to your visit.

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

Daiamet Co., Ltd. will exhibit at the "Automotive Technology Exhibition 2026 YOKOHAMA," held at Pacifico Yokohama from May 27 (Wednesday) to 29 (Friday), showcasing the "sintered spur gear for EV cooling modules using high-density heat treatment materials," which is mounted on the cooling module for BEVs (Battery Electric Vehicles) that won the Japan Powder Metallurgy Association's 2025 Industrial Association Award (New Product Design Category). This product is a spur gear used in the valve for switching the flow path of the cooling module for BEVs. By combining sintered materials with unique heat treatment technology, it achieves both high strength and high airtightness, addressing the issues of strength and wear resistance that were challenges with resin gears. Additionally, to tackle the airtightness issues caused by the pores inherent in sintered parts, high airtightness has been secured by optimizing the steam treatment conditions, enabling mass production. This technology is expected to see further adoption as the BEV cooling module market expands. At the venue, we will introduce a wide range of our products and technologies, including the newly exhibited sintered spur gear for EV cooling modules, cores for servo motors, various motor cores, transformers for DC-DC converters, sintered mechanical parts, and sintered oil-impregnated bearings.

The first step in DX is essential understanding and penetration into the field. While improving meter reading operations and addressing human error, we will introduce hints for achieving paperless and digital management. Last year marked the year when all members of the baby boomer generation became late-stage elderly, aged 75 and older. In industries that rely heavily on human labor, such as maintenance, this situation is serious, with indications that by 2030, more than 30% of equipment may not be maintainable. The issue of labor shortages in an aging workforce is becoming an imminent crisis, making the realization of DX in the field an urgent necessity. In this seminar, based on customer cases using the meter reading app "hakaru.ai by GMO," we will introduce hints on how to advance the DX of inspection management operations from the perspectives of building management and equipment management in manufacturing. 【Recommended for the following individuals】 - Those struggling with promoting DX in equipment management - Those feeling challenges in meter reading for equipment management or production management - Those considering advancing paperless and digitalization - Management personnel and equipment maintenance staff who want to promote DX.