Thank you for visiting the Interfex Japan exhibition.

Recommended for liquid stirring and discharge! A stirring unit that combines a stirrer and a valve with a stainless steel container.

○ The container has a bottom plate that is inclined in the discharge direction, allowing for complete liquid discharge without residue. ○ It is equipped with a centrifugal stirrer that can mix low to medium-high viscosity liquids, without any blades. ○ The stirrer can be selected between air motor type and electric motor type. ○ The valve is a straight type with low flow resistance and features a diaphragm design that is excellent in chemical resistance. ○ The stirrer and valve can be easily disassembled and cleaned with a Heller connection.

• Stainless steel container

High power for reduced heating time! Stainless container with a heater that can warm up in a short time.

1. Compact Equipment The heater unit is directly attached to the container, making the equipment compact and space-efficient. Since all the devices are mounted on the container, moving it is easy. 2. No Initial Cost Chillers with both heating and cooling functions are expensive and have a higher initial cost compared to heaters. If only heating of the jacket is needed, heaters are overwhelmingly more cost-effective in terms of initial investment. 3. Can Quickly Heat the Jacket By adopting a 7.5kW heater, the water in the jacket can be heated to high temperatures in a short time, warming the contents. Product Features - The heater is installed in the jacket section, allowing for liquid heating with just this unit. - It has a dry-run prevention feature, so the heater stops when the water in the jacket is low. - Equipped with a level gauge to check the water level in the jacket. - The temperature of the mixed liquid can be adjusted through the linkage between the thermometer and the heater. - A stirrer can be attached to the container, allowing for uniform heating of the contents. As this is a made-to-order product, modifications to "dimensions" and "materials" can be made, as well as custom processing to suit specific applications.

• tank

Super compact! Portable mixing and transfer equipment! You can manage the mixer and pump together.

- A combination of stainless steel containers, mixers, and transfer pumps. - After mixing the raw materials, they can be moved directly to the next process, allowing the mixed solution to be transferred. - The operation of the mixer and pump can be collectively controlled from the control panel. - The container and cart are made of durable and rust-resistant SUS304 material. - We will select, design, and manufacture according to the usage environment and the contents.

• Other pumps

This is a stainless steel container with an easy-to-clean reverse function. A mixer can also be attached.

○ We have added a reverse function to easily clean heavy containers. ○ You can tilt the container to any angle just by turning the handle. ○ No need for a stand! It comes with a mounting seat for the mixer with a lifting function. ○ The container is made of SUS304, which is resistant to rust.

• tank

This is a stainless steel container equipped with a movable stand. The container and stand can be separated. It features a hopper type that is excellent for discharging liquids and other materials!

○ The container and stand can be separated and fixed according to the operation. ○ The container and stand can be attached with butterfly screws, requiring no tools. ○ The container can be removed from the stand for cleaning, which shortens cleaning time. ○ The container and stand are made of durable and rust-resistant SUS304 material. ○ HT-ST-ASC is a cover type, HT-CTH-ASC is a clip-sealed type, and HT-CTL-ASC is a band-sealed type. ○ Containers of 200L or more are equipped with fittings (holes) for lifting.

• Stainless steel container

Stainless hopper ideal for filling machines, custom-made to fit your equipment.

【Features】 - This is a hopper designed for material feeding. - The hopper has a sharp angle of 60 degrees, allowing for smooth feeding. - It can be easily installed if your current equipment or tank lid has a helix pipe. 【Specifications can be modified】 - Specifications can be changed to suit your equipment. - The size of the helix at the discharge outlet can be changed. - The type of discharge outlet can also be modified; it can be changed to a flange or nipple. Please consult us.

• Food Processing Equipment

Eccentric-shaped stainless steel hopper! We will manufacture it to fit your equipment.

【Features】 ○ This is a hopper designed for material feeding purposes. ○ It has an eccentric shape that excels in discharging liquids and powders. ○ Compared to standard hoppers, it allows for adjustments to avoid interference with surrounding components. ○ It can be easily installed if your current equipment or tank lid has a hygienic piping connection. 【Specifications can be modified】 ・Specifications can be changed to suit your equipment. ・The hygienic connection size at the discharge outlet can be modified. ・Changes to the type of discharge outlet are also possible. It can be changed to a flange or nipple. Please consult us.

• Food Processing Equipment

Square stainless steel hopper tank! It’s a hopper with rounded corners, making it easy to handle.

【Features】 ○ This is a hopper designed for material input. ○ It is ideal for feeding raw materials into large containers or machines. ○ The corners are rounded to prevent liquids or powders from accumulating, making it easy to clean. ○ Its rectangular shape allows for more efficient use of space compared to round shapes. ○ If your current equipment or tank has a sanitary connection, it can be installed immediately. 【Specifications can be modified】 ・Specifications can be changed to fit your equipment. ・The size of the sanitary outlet can be changed. ・The type of outlet can also be changed; it can be modified to a flange or nipple. Please consult us.

• Food Processing Equipment

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

From turning processing to milling processing—responding to process integration with composite machining centers C&G Systems Co., Ltd. has released the lathe module "TURNING," which realizes the "true process integration" required in the era of composite machining centers. By covering 2D and 3D milling, wire electrical discharge machining, and turning processing, "EXCESS-HYBRID II / Parts CAM" has evolved into an ALL-IN-ONE CAM system that transcends the boundaries of processing fields. The lathe module "TURNING" was developed against the backdrop of voices from the field, where the advancement of high functionality and integration of NC machine tools has led to continued reliance on interactive input and manual programming, resulting in increased man-hours, occurrence of errors, and a shortage of skilled technicians. While composite machining centers have the significant advantage of completing both turning and milling in one machine, the diversification and complexity of processed shapes have made programming advanced and intricate, necessitating measures against interference risks and efficient process design. "TURNING" achieves a reduction in programming time and stable quality reproduction, maximizing the performance of composite machining centers.

Notice of participation in the "IT Trend EXPO 2026 Spring" (the largest online exhibition in Japan) from March 3 (Tue) to March 7 (Sat). ◆ IT Trend EXPO 2026 Spring Event Overview ◆ Name: IT Trend EXPO 2026 Spring Theme: New encounters will change tomorrow's "work" Date: March 3 (Tue) - 7 (Sat), 2026 Location: Online Participation Fee: Free Registration: Please apply from the URL below Meiden VR Safety Experience Education: https://it.expo.it-trend.jp/key/xpgi2xce Safety Information Portal: https://it.expo.it-trend.jp/key/3r6vr3bw

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.