AAEON Industrial Fanless Embedded PC Japanese Catalog 2018 Vol. 1

Industrial fanless embedded compact PC equipped with Intel Celeron N3350/Pentium N4220, supporting wide temperature range, DC input.

It is an industrial fanless compact PC with the following features: ● Equipped with Intel Pentium N4200 / Celeron N3350 processors ● Slim chassis with a thickness of 37mm ● Rich I/O options (COM x 3, HDMI, VGA, USB ports, etc.) ● Wide operating temperature range of -30℃ to 60℃ ● Equipped with 2 Gigabit Ethernet ports and 4 USB ports ● Wall mount compatible

• controller
• Industrial PCs
• Embedded Board Computers

AAEON Industrial Ultra-Compact Fanless PC, compatible with DC 12-24V input, RS-232×1, VGA×1, USB×2.

It is an industrial fanless ultra-compact PC with the following features: ● Equipped with 2 Gigabit LAN ports ● 1 x 2.5-inch HDD/SSD bay ● 1 x USB 3.0 port ● Supports 8-bit programmable digital input/output ● Compatible with 12-24V DC input

• controller
• Industrial PCs
• Embedded Board Computers

AAEON Intel Celeron J1900/N2807 Ultra-Compact Industrial Fanless PC (LAN x 4, HDMI x 2 ports)

This is an industrial fanless PC with the following features: ● Palm-sized ultra-compact design (166 mm x 106.6 mm x 30 mm) ● Only 30 mm thick ● Equipped with 4 LAN ports and 2 HDMI ports ● Operating temperature range of -30°C to 65°C

• controller
• Industrial PCs
• Embedded Board Computers

AAEON Wide Temperature Range Ultra-Compact Fanless Industrial Embedded PC with 4 LAN Ports and 2 HDMI Ports, Operating Temperature -30°C to 75°C

It is an industrial embedded fanless PC with the following features: ● Equipped with 4 Gigabit LAN ports ● 2 HDMI ports ● USB 3.0 compatible ports ● Aluminum casing, palm-sized ● Wide temperature operation range from -30°C to 70°C ● Compatible with VESA 75 and DIN mounting using separately sold VESA mount and DIN mount brackets

• controller
• Industrial PCs
• Embedded Board Computers

AAEON industrial fanless embedded PC RS-232×4 + RS232/422/485×2 equipped with Intel N4200/N3350

The industrial fanless embedded PC has the following features: ● Equipped with Intel(R) Pentium(R) N4200 2.5GHz / Celeron(R) N3350 2.4GHz ● DDR3L 1866 SODIMM x 1 slot (up to 8GB) ● Total of 6 COM ports: RS-232/422/485 x 2 + RS-232 x 4 ● USB 3.0 x 4 ● Supports VGA + HDMI output ● 2.5-inch drive bay x 1, mSATA x 1 slot ● AAEON's Hi-Safe compliant ● DC 9~24V input compatible ● Wide temperature range of -20°C to 60°C ● AT/ATX switch, remote power ON/OFF switch

• controller
• Industrial PCs
• Embedded Board Computers

<Title> Development of Gene Expression Control Technology through RNA Hacking In the latest presentation paper, we have utilized Abby. Associate Professor Yosuke Katsuta from Kumamoto University Graduate School of Advanced Science and Technology, Analytical Chemistry Laboratory (also co-founder of StapleBio), will be giving a presentation in an online seminar. He is working on the development of RNA hacking technology aimed at controlling gene expression by utilizing short nucleic acids named Staple to change the higher-order structure of target mRNA. He will present the latest data focusing on the results of cell experiments and animal experiments in the development of this technology. Related paper on the presentation content: Staple oligomers induce a stable RNA G-quadruplex structure for protein translation inhibition in therapeutics | Nature Biomedical Engineering

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.