Thank you for visiting the Food Factory 2018 exhibition.

High power for reduced heating time! Stainless container with a heater that can warm up in a short time.

1. Compact Equipment The heater unit is directly attached to the container, making the equipment compact and space-efficient. Since all the devices are mounted on the container, moving it is easy. 2. No Initial Cost Chillers with both heating and cooling functions are expensive and have a higher initial cost compared to heaters. If only heating of the jacket is needed, heaters are overwhelmingly more cost-effective in terms of initial investment. 3. Can Quickly Heat the Jacket By adopting a 7.5kW heater, the water in the jacket can be heated to high temperatures in a short time, warming the contents. Product Features - The heater is installed in the jacket section, allowing for liquid heating with just this unit. - It has a dry-run prevention feature, so the heater stops when the water in the jacket is low. - Equipped with a level gauge to check the water level in the jacket. - The temperature of the mixed liquid can be adjusted through the linkage between the thermometer and the heater. - A stirrer can be attached to the container, allowing for uniform heating of the contents. As this is a made-to-order product, modifications to "dimensions" and "materials" can be made, as well as custom processing to suit specific applications.

• tank

Super compact! Portable mixing and transfer equipment! You can manage the mixer and pump together.

- A combination of stainless steel containers, mixers, and transfer pumps. - After mixing the raw materials, they can be moved directly to the next process, allowing the mixed solution to be transferred. - The operation of the mixer and pump can be collectively controlled from the control panel. - The container and cart are made of durable and rust-resistant SUS304 material. - We will select, design, and manufacture according to the usage environment and the contents.

• Other pumps

This is an original air motor mixer from Nitto Metal Industry. It is ideal for preventing foaming during mixing and for stirring high-viscosity liquids.

- It can stir in a sealed state with a Heller connection. Pressure reduction is also possible. - It can stir liquids with low to medium-high viscosity. - It comes standard with a waste receiver to prevent contamination from wear particles generated at the shaft seal. - The stirring body is a Bernoulli flow stirring body type BEAG E, which is less likely to incorporate air. (Patent No. 6169207) - It can be used in explosion-proof areas. - Made entirely of stainless steel, it is resistant to rust and hygienic. - It can be used without lubrication, so there is no oil splatter. For more details, please visit our website. https://www.monovate.co.jp/shop/g/gntma-s/

• Mixer/agitator

This is an original electric motor stirrer from Nitto Metal Industry. It is ideal for preventing foaming during stirring and for stirring high-viscosity liquids.

- It features an easy-to-remove and attach connection. - It can stir in a sealed state and is usable under both pressurized and vacuum conditions. - It can stir liquids with low to medium-high viscosity. - It comes standard with a debris collector to prevent contamination from wear particles generated at the shaft seal. - The stirring element is a Bernoulli flow stirring element type BEAG E, which is designed to minimize air entrapment. (Patent No. 6169207) - It is equipped with a standard controller that allows for speed adjustment. For more details, please visit our website. https://www.monovate.co.jp/shop/g/gntme-a/

• Other energy equipment

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

Hotron's vehicle detection sensors allow you to search for products that meet your needs in three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles, alerting you with rotating lights or switching the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The RNP-45 is a surface mount power film resistor designed to be compatible with the TO-252 package, weighing only 0.33 grams, with a thermal resistance of 3.0°C/W and a rated power of 45W. The resistive element is a pulse-resistant thick film, featuring excellent high-frequency characteristics with a reactance component of 2.7pF and 14.7nH, while also having a pulse power performance of 1kW-1µs despite its small size. The operating temperature range is from -55 °C to +175 °C. Additionally, it incorporates several design features, such as the removal of the metal flange to maximize the thermal performance of the resistor, compatibility with standard reflow SAC solder joints instead of wire bond connections, making it suitable for automatic mounting, an increased resistive element area to enhance surge performance, and the adoption of a 0.8mm substrate to strengthen bending stress.