MTS's LP series liquid level gauges are usable in hazardous areas in Japan.

NEC, CEC, ATEX, IECEx certified explosion-proof level gauge for plants.

Level Plus is an accurate and robust liquid level gauge with high flexibility. With a single sensor, it can measure liquid levels, interface levels, and temperature, and once installed and calibrated, there is no need for regular maintenance or recalibration. It features intrinsically safe explosion-proof specifications certified by NEC, CEC, ATEX, and IECEx, and is widely chosen as a liquid level transmitter in place of radar level gauges, servo gauges, dielectric, conductivity, capacitance, and ultrasonic level sensors. Its applications are diverse, and Temposonics offers sensors tailored to meet customer needs.

• Liquid level control/level switch
• Water treatment equipment
• Wastewater/wastewater treatment equipment

Sanitary specifications suitable for beverage, food, and pharmaceutical tanks.

Level Plus is a high-precision, highly reliable liquid level displacement sensor utilizing magnetostrictive technology. It is widely chosen as a liquid level transmitter in essence-safe explosion-proof and pressure-resistant explosion-proof specifications certified by ATEX, CSA, FM, IECEX, NEPSI, KC Approval, and others, serving as an alternative to radar level gauges, servo gauges, dielectric, conductivity, capacitance, and ultrasonic level sensors. It uses two floats with different specific gravities in a single level gauge, allowing for the measurement of liquid levels and interfaces, as well as temperature measurement, automatic calculation of tank capacity via microcontroller, error diagnosis, and many other functions. Additionally, Temposonnics has developed level sensors suitable for tanks in the beverage, food, and pharmaceutical industries, drawing on years of extensive experience and knowledge in sanitary applications. The all-stainless steel level gauges and floats are certified to US 3A standards and can be finished with sanitary polishing (200 Grit/Ra 25) and electropolishing (240 Grit/Ra 15). The applications are wide-ranging, and Temposonnics offers sensors tailored to meet the specific needs of customers.

• Beverage Production Equipment
• Food Testing/Analysis/Measuring Equipment
• Food storage equipment and facilities

Level sensor suitable for water treatment equipment

Level Plus is an accurate and robust liquid level gauge with high flexibility. It can measure liquid level, interface level, and temperature with a single sensor, and once installed and calibrated, it does not require regular maintenance or recalibration. With intrinsically safe explosion-proof specifications certified by NEC, CEC, ATEX, and IECEx, it is widely chosen as a liquid level transmitter in place of radar level gauges, servo gauges, dielectric, conductivity, capacitance, and ultrasonic level sensors. Its applications are diverse, and Temposonics offers sensors tailored to meet customer needs.

• Liquid level control/level switch
• Water treatment equipment
• Wastewater/wastewater treatment equipment

3 in 1 measurement: Measure liquid level, interface, and temperature with a single level gauge.

Level Plus is a high-precision, high-reliability liquid level displacement sensor utilizing magnetostrictive technology. With ATEX and FM certifications for intrinsic safety and explosion-proof specifications, it is widely chosen as a liquid level transmitter alternative to radar level gauges, servo gauges, dielectric, conductivity, capacitance, and ultrasonic level sensors. It uses two floats with different specific gravities in a single level gauge, enabling not only the measurement of liquid levels and interface levels but also temperature measurement, automatic calculation of tank capacity via microcontroller, error diagnostics, and many other functions. Its applications are diverse, and Temposonics offers sensors tailored to meet customer needs.

• Food storage equipment and facilities
• Other surface treatment equipment
• Filtration Equipment

High-precision liquid level detection for precise flow control.

Temposonics sensors are durable absolute linear scales that use magnetostrictive technology, designed to withstand harsh environments such as shock, vibration, and temperature. They offer high precision, robustness (vibration resistance of 15G, IP68/69K, pressure resistance of 35MPa, operating temperature range of -40 to +75°C, CE compliant), and a maximum measurement length of 20m, along with a variety of interfaces. With features such as waterproofing, long measurement lengths, corrosion-resistant rods (Teflon, Hastelloy, SUS316L), and explosion-proof capabilities, they can be used in a wide range of applications, particularly where high precision and real-time position measurement are required, such as in liquid level measurement and precise flow control for water, oil, and chemicals. Additionally, the movable part only requires a magnet for position detection, eliminating the need for power/signal cables. This contributes to cost reduction for customers as it does not require regular maintenance or cleaning.

• Sensors
• Level gauges and level switches
• Liquid level control/level switch

Magnetostrictive level gauge suitable for use in oil and gas tanks.

Temposonics offers explosion-proof level gauges that can be used in explosion-proof areas of plants such as gas and petrochemical facilities. We have obtained various explosion-proof certifications, including intrinsic safety and pressure-resistant explosion-proof structures, which are essential for such applications, from certification bodies in various countries such as ATEX, IECEx, NEPSI, and KC Approval. We also have extensive experience in using sensors in explosion-proof areas. Our magnetostrictive level sensors, despite being a simple measurement method using floats, can measure absolute positions across the entire effective measurement range. Additionally, they excel in corrosion resistance, pressure performance, and operating temperature conditions, allowing for high-precision position detection even in harsh environments.

• Other physicochemical equipment
• Level gauges and level switches
• Liquid level control/level switch

The Level Plus liquid level gauge is a liquid level displacement sensor that boasts high precision and high reliability through magnetostrictive technology.

With certifications such as ATEX, IECEx, FM, NEPSI, and KC Approval, the intrinsically safe explosion-proof and pressure-resistant specifications enable Temposonics technology to facilitate precise and diverse liquid level measurement. It is widely chosen as a liquid level transmitter alternative to radar level gauges, servo gauges, dielectric, conductivity, capacitance, and ultrasonic level sensors. Additionally, it supports a maximum rod length of 22 meters, allows for movement speed, and can measure temperature at 12 locations, making it suitable for monitoring strata and ground subsidence, among other applications.

• Sensors
• Food storage equipment and facilities
• Level gauges and level switches

Level gauges with intrinsic safety explosion-proof and flameproof specifications certified by ATEX, IECEx, FM, etc. Capable of simultaneously measuring water level, oil level, and temperature.

All the technologies possessed by Temposonics (two-liquid measurement, temperature measurement, speed measurement, absolute, non-contact, robust, explosion-proof specifications) enable precise and diverse liquid level measurement, making them a popular choice as liquid level transmitters in place of expensive radar level gauges, servo gauges, dielectric, conductivity, capacitance, and ultrasonic level sensors. Additionally, the maximum rod length of 22 meters is among the best in the world.

• Food storage equipment and facilities
• Other surface treatment equipment
• Filtration Equipment

The Level Plus LP series liquid level gauge has over 25 years of experience in the sanitary specifications field.

Temposonics has developed level sensors that can accommodate many tanks for pharmaceuticals and food, leveraging its extensive experience and knowledge in sanitation over the years. The all-stainless steel level gauges and floats are certified to the US 3A standards and can be finished with sanitary polishing (200 Grit/Ra 25) and electropolishing (240 Grit/Ra 15).

• Sensors
• Beverage Production Equipment
• Chemicals

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Dear Sir/Madam, I would like to express my congratulations on the continued prosperity of your company. Thank you very much for your exceptional support. We would like to inform you that our company will be closed for winter holidays during the following period. We apologize for any inconvenience this may cause and kindly ask for your understanding. 1. Winter Holiday Period From Thursday, December 28, 2023, to Thursday, January 4, 2024. 2. Business Operations After the Winter Holiday Period We will resume normal operations from Friday, January 5, 2024.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.