ABB supplies power to the longest bridge-tunnel link in China.

Top model. Achieves advanced motor protection and ensures trouble-free operation.

The PSTX soft starter is the top model that almost encompasses all conceivable functions among the entire lineup. By achieving all advanced motor protection, it ensures trouble-free operation. Its ability to detect abnormalities and issue pre-warnings before stopping the motor helps avoid unnecessary downtime. The torque control function has been jointly developed and validated with renowned pump manufacturers to ensure optimal stopping without water hammer or pressure surges. For more details, please download the catalog or contact us. The Japanese homepage for ABB soft starters has been launched. You can access the ABB soft starter Japanese page from the special product and solution page for soft starters on the ABB Japan homepage. Information about ABB soft starters is available in Japanese, so please take a look at that as well.

• Other process controls
• Other FA equipment
• Other safety equipment

Built-in both motor overload protection and torque control for pump control.

The PSE soft starter is the world's first compact starter that incorporates both motor overload protection and torque control for pump control. This compact design, which integrates these essential functions, provides a highly efficient starting solution. With a display and four keypads, it allows for the configuration of all functions of the soft starter and displays all necessary information from startup to shutdown. For more details, please download the catalog or contact us. The Japanese homepage for ABB soft starters has been launched. You can access the ABB soft starter Japanese page from the special product and solution page for soft starters on the ABB Japan homepage. Information about ABB soft starters is available in Japanese, so please take a look at that as well.

• Other process controls
• Other FA equipment
• Other safety equipment

The smallest in our lineup. Built-in bypass circuit reduces energy loss.

The Soft Starter PSR Compact 3-105A is the smallest in our lineup of soft starters, allowing for a compact design of the starting device itself. The combination of a manual motor starter and PSR enables a design that is significantly more compact than, for example, a star-delta starter. By incorporating a bypass circuit, energy loss is reduced, connections are simplified, and setups that were previously difficult can now be adjusted with just three potentiometers. The optimized slope characteristics ensure very smooth starting and stopping in all applications. For more details, please download the catalog or contact us. The Japanese homepage for ABB Soft Starters has been launched. You can access the ABB Soft Starters Japanese page from the product and solution special page on the ABB Japan homepage. Information about ABB Soft Starters is available in Japanese, so please take a look at that as well.

• Other process controls
• Other FA equipment
• Other safety equipment

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation in environments with temperature differences, such as cold storage warehouses, is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable) ○ LED display and response sound allow for easy confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.